Eminence TRAVIS TOY DOUBLE T15 15″ Loudspeaker 300 W 8 Ohm

No longer available!

350.97 incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
Availability: No longer available! No longer available! SKU: ERDT15A Category:

15″ Loudspeaker 300 W 8 Ohm

Rated at 300 watts, the Travis Toy Signature Double-T 15 pedal steel guitar speaker features a tight low end, a midrange bite that can cut through a mix, and detailed high end without being too bright. Travis worked closely with the engineers at Eminence to achieve these characteristics and even managed to pack them all into a 15 inch speaker that weighs just over 9.9 lbs – less than half the weight of the speakers he replaced.

15″ Loudspeaker 300 W 8 Ohm

Rated at 300 watts, the Travis Toy Signature Double-T 15 pedal steel guitar speaker features a tight low end, a midrange bite that can cut through a mix, and detailed high end without being too bright. Travis worked closely with the engineers at Eminence to achieve these characteristics and even managed to pack them all into a 15 inch speaker that weighs just over 9.9 lbs – less than half the weight of the speakers he replaced.

 

Read more

Specifications

Product type
Loudspeaker Chassis
Type
Passive
Nominal Diameter
15 “
Nominal Diameter
381 mm
Voice Coil
3 “
Voice Coil
76 mm
Overall diameter
398.1 mm
Pitch Circle Diameter
7.1 mm
Cut- out Measurement
369.8 mm
Diameter of fixing holes
7.1 mm
Depth
168.3 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
300 W
Sensitivity (1 W / 1 m)
101 dB
Frequency response
50 – 33000 Hz
Voice Coil Material
copper
Magnet
Neodymium
Thiele & Small Parameter
Fs (Resonance Frequency)
56 Hz
Re (DC resistance)
3.18 Ohm(s)
Qms (mechanical quality)
9.71
Le (inductance of the voice coil)
0.4 mH
Qes (electrical quality)
0.34
Qts (overall quality)
0.33
Vas (equivalent volume)
111.97 liters / 3.95 cu.ft.
Mms (moving mass)
74 g
BL (power factor)
15.76 T/m
Xmax (maximum displacement)
1.4 mm
Cms (elasticity of the suspension)
0.11 mm/N
Sd (membrane area)
856.3 cm²
Weight
3,49 kg
Weight 3.6 kg
Woofer Inch

Reviews

There are no reviews yet.

Be the first to review “Eminence TRAVIS TOY DOUBLE T15 15″ Loudspeaker 300 W 8 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

Eminence TRAVIS TOY DOUBLE T15 15" Loudspeaker 300 W 8 Ohm removeEMINENCE EK15B Kappa-15 - 15" Speaker 450 W 16 Ohms removeCELESTION T5611 WOOFER 15'' FTR15-4080HDX PRO AUDIO 1000W removeB & C Speakers 15-NDL76 Woofer Neodymium magnet 15 inch, 500W,99.5dB removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeJBL 2226J 15" High-Power LF Driver 16 Ohm remove
NameEminence TRAVIS TOY DOUBLE T15 15" Loudspeaker 300 W 8 Ohm removeEMINENCE EK15B Kappa-15 - 15" Speaker 450 W 16 Ohms removeCELESTION T5611 WOOFER 15'' FTR15-4080HDX PRO AUDIO 1000W removeB & C Speakers 15-NDL76 Woofer Neodymium magnet 15 inch, 500W,99.5dB removeEMINENCE Delta 15 LFA 15" Speaker 500 W 8 Ohms removeJBL 2226J 15" High-Power LF Driver 16 Ohm remove
ImageERDT15A Eminence TRAVIS TOY DOUBLE T15 15 inch Loudspeaker 300 W 8 Ohm hxeio speaker artsound woofer megafwno
SKUERDT15AEK15BT561115-NDL76ED15LFA2226J
Rating
Price 350.97 incl. GR VAT 201.43 incl. GR VAT 275.27 incl. GR VAT 295.00 incl. GR VAT285.19 incl. GR VAT 469.00 incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description

15" Loudspeaker 300 W 8 Ohm

Rated at 300 watts, the Travis Toy Signature Double-T 15 pedal steel guitar speaker features a tight low end, a midrange bite that can cut through a mix, and detailed high end without being too bright. Travis worked closely with the engineers at Eminence to achieve these characteristics and even managed to pack them all into a 15 inch speaker that weighs just over 9.9 lbs - less than half the weight of the speakers he replaced.
Content

Specifications

Product type
Loudspeaker Chassis
Type
Passive
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
3 "
Voice Coil
76 mm
Overall diameter
398.1 mm
Pitch Circle Diameter
7.1 mm
Cut- out Measurement
369.8 mm
Diameter of fixing holes
7.1 mm
Depth
168.3 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
300 W
Sensitivity (1 W / 1 m)
101 dB
Frequency response
50 - 33000 Hz
Voice Coil Material
copper
Magnet
Neodymium
Thiele & Small Parameter
Fs (Resonance Frequency)
56 Hz
Re (DC resistance)
3.18 Ohm(s)
Qms (mechanical quality)
9.71
Le (inductance of the voice coil)
0.4 mH
Qes (electrical quality)
0.34
Qts (overall quality)
0.33
Vas (equivalent volume)
111.97 liters / 3.95 cu.ft.
Mms (moving mass)
74 g
BL (power factor)
15.76 T/m
Xmax (maximum displacement)
1.4 mm
Cms (elasticity of the suspension)
0.11 mm/N
Sd (membrane area)
856.3 cm²
Weight
3,49 kg
KAPPA-15A American Standard Series Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar. SPECIFICATION
  • Nominal Basket Diameter 15“, 381 mm
  • Nominal Impedance 16 ohms
  • Power Rating Watts 450 W / Music Program 900 W
  • Resonance 33 Hz
  • Usable Frequency Range 52 Hz - 2.3 kHz
  • Sensitivity 100.5
  • Magnet Weight 80 oz.
  • Gap Height 0.375“, 9.53 mm
  • Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 33 Hz
  • DC Resistance (Re) 5.22
  • Coil Inductance (Le) 1.05 mH
  • Mechanical Q (Qms) 8.90
  • Electromagnetic Q (Qes) 0.33
  • Total Q (Qts) 0.32
  • Compliance Equivalent Volume (Vas) 321.3 liters / 11.35 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd) 343 cc
  • Mechanical Compliance of Suspension (Cms) 0.31 mm/N
  • BL Product (BL) 15.7 T-M
  • Diaphragm Mass inc. Airload (Mms) 76 grams
  • Efficiency Bandwidth Product (EBP) 98
  • Maximum Linear Excursion (Xmax) 4.0 mm
  • Surface Area of Cone (Sd) 856.3 cm²
  • Maximum Mechanical Limit (Xlim) 11.6 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed N/A Vented 45-113 liters/1.6-4 cu.ft.
  • Overall Diameter 15.16“, 384.9 mm
  • Baffle Hole Diameter 13.77“, 349.6 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.25“, 6.4 mm
  • Mounting Holes B.C.D. 14.56“, 369.9 mm
  • Depth 6.13“, 156 mm
MATERIALS of Construction
  • Copper voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap
  • 15" ferrite subwoofer offers 1000Wrms (AES) continuous power handling and a frequency response of 40Hz-2500Hz
  • 4" high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
  • Double suspension and a "multi-roll” surround provide exceptional linearity at extremes of cone excursion
  • Intelligent heat management in both chassis and magnet assembly design further minimises distortion
  • Less than 10kg - very low weight for this product class
Nominal diameter (mm/in) 381/15
Power Rating (AES, W rms) 1000
Nominal impedance (Ω) 8
Voice coil diameter (mm/in) 101.6/4.0
Magnet type Ferrite
Magnet weight (kg/oz) 3.1/110
Chassis type Cast aluminium
Sensitivity (dB) 96
Frequency range (Hz) 40-2500
Coil material Round copper
Former material Glass fibre
Cone material Glass loaded paper with weather resistant impregnation
Surround material Cloth-sealed
Suspension Double
Xmax (mm/in) 8.0/0.33
Gap depth (mm/in) 10.0/0.40
Voice coil winding width (mm/in) 25.0/0.99
Small Signal Parameters
D (m/in) 0.33/12.99
Fs (Hz) 40.5
Mmt (g/oz) -
Mmd (g/oz) 139.38/4.92
Mair 14.149/0.499
Qms 3.98
Qes 0.36
Qts 0.33
Re (Ω) 5.10
Vas (lt/ft3) 104.27/3.68
BI (Tm) 23.53
Cms (mm/N) 0.10
Rms (kg/s) 9.81
Le (mH) 1.8
Mounting Information
Overall diameter (mm/in) 385/15.16
Overall depth (mm/in) 180/7.1
Cut-out diameter (mm/in) 351/13.82
Mounting slot dimensions (mm/in) 10 x 6.5/0.4 x 0.26
Number of mounting slots 8
Mounting slot PCD range (mm/in) 365-375/14.37-14.76
Unit weight (kg/lb) 9.7/21.3
Packed Dimensions and Weight
Single pack size W x D x H (mm/in) 435 x 435 x 200/17.1 x 17.1 x 7.9
Single pack weight (kg/lb) 11.5/25.4
Multipack (36) size W x D x H (mm/in) 1210 x 1050 x 980/47.6 x 41.3 x 35.4
Multipack (36) weight (kg/lb) 380/836
1000 W continuous program power capacity
76 mm (3 in) copper voice coil
40 – 2000 Hz response
99.5 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Ventilated voice coil gap for reduced power compression
Recommended for professional audio as a mid-bass or floor monitor in a sealed enclosure. Also suitable as a woofer in vented, bass guitar or PA enclosures. Product type Loudspeaker Chassis
Type PA
Nominal Diameter 15 "
Nominal Diameter 381 mm
Voice Coil 2.5 "
Voice Coil 63.5 mm
Overall diameter 384.8 mm
Pitch Circle Diameter 369.9 mm
Cut- out Measurement 352.3 mm
Diameter of fixing holes 6.4 mm
Depth 160 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 500 W
maximum rated load 1000 W
Sensitivity (1 W / 1 m) 96 dB
Frequency response 42 - 3200 Hz
Voice Coil Material copper
Magnet Ferrite
Depth of the magnetic gap 9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency) 39 Hz
Re (DC resistance) 6.11 Ohm(s)
Qms (mechanical quality) 6.3
Le (inductance of the voice coil) 1.37 mH
Qes (electrical quality) 0.52
Qts (overall quality) 0.48
Vas (equivalent volume) 241
Mms (moving mass) 75 g
BL (power factor) 14.6 T/m
Xmax (maximum displacement) 4.8 mm
Cms (elasticity of the suspension) 0.23 mm/N
Sd (membrane area) 873 cm²
Weight 6,449 kg

The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“.

Weight3.6 kg5.00 kg9.70 kg4.60 kg6.50 kg10.00 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 3.6 kg
Woofer Inch

Weight 5.00 kg
Weight 9.70 kg
Weight 4.60 kg
Weight 6.50 kg
Weight 10.00 kg