| Content | 2-way DMX splitter
- Compact splitter with 3- and 5-pin XLR terminals
- Rugged metal housing
Package contents
- 1 x device, 1 x user manual
| Power supply: |
100-240 V AC, 50/60 Hz |
| Power consumption: |
1 W |
| Power connection: |
Fixed power supply cord with safety plug |
| DMX input: |
3-pin XLR (M) mounting version
5-pin XLR (M) mounting version |
| DMX output: |
2 x 3-pin XLR (F) mounting version
2 x 5-pin XLR (F) mounting version |
| Housing color: |
Black |
| Status LED: |
DMX |
| Dimensions: |
Length: 16,0 cm
Width: 8,0 cm
Height: 4,0 cm |
| Weight: |
420 g |
|
- Professional 6-way DMX splitter / booster
- Chassis 1U 19" rack-mount enclosure
- 6 electrically isolated XLR (3-pin / 5-pin) outputs
- DMX status indicator per channel
- Power status indicator
- Switchable 120 Ohm terminating resistor for the DMX THRU output jack
- Front and rear rack-mount angle attachment options
The Cameo CLSB6D is the professional solution for configuring DMX networks. The splitter and booster in 19" format amplifies the DMX input signal and distributes it to 6 electrically isolated outputs. It is connected directly to the DMX controller or to DMX devices. The input and the THRU socket for looping of the signal are duplicated on the front and back of the CLSB6D and connected in parallel. Bright LEDs show the DMX and power status of the channels on the front panel, the outputs are located on the back. A switchable 120 Ohm terminating resistor on the DMX THRU output and the power switch complete the equipment; the IEC-cable is supplied. For convenient output connector access and reverse installation the rack-mount angles can be attached to the rear of the chassis.
Product type
Other Lighting Accessories
Type
DMX splitter / booster
DMX inputs
2 (parallel)
DMX input connectors
XLR 3-pin male , XLR 5-pin male
DMX Thru Outputs
2 (parallel)
DMX Thru Output Connectors
XLR 3-pin female , XLR 5-pin female
DMX outputs
6
Controls
DMX Thru Terminator , Power On/Off
Indicators
6 x Power LED , 6 x Signal LED
Mains connector
IEC power connector
Operating voltage
transformer
Operating voltage
230 V AC, 50 Hz
Power consumption
15 W
Width
483 mm
Height
44 mm
Depth
160 mm
Weight
2,976 kg
Accessories (included)
Power cord | The Cameo W-DMX™ T2 is the successor to the W-DMX T1™ with a higher transmission range and Bluetooth connectivity for configuration. It is a member of Wireless Solution's acclaimed BlackBox series of transceivers for wireless lighting control supporting both transmit and receive modes of DMX and RDM signals in the 2.4 GHz frequency band. Built for professional applications, the roadworthy die-cast metal housing is packed with patented W-DMX™ technologies. These include Adaptive Frequency Hopping to automatically avoid interference created by other wireless networks, and Data-Safe error correction that protects DMX and RDM data from corruption.
The Cameo W-DMX™ T2 features Neutrik 3-pin and 5-pin DMX inputs and outputs, an automatically switching power supply for multi-voltage operation plus a gold-plated Phoenix connector for 12 V battery powering. The G5 transceiver is backward compatible with W-DMX™ G3, G4, G4S and G5 units. It comes with a 3 dBi single-band antenna providing an operating range up to 700 m, N-type antenna adapter and a 19" rackmount kit.
The Cameo W-DMX™ T2 is also prepared for upgradeable CRMX compatibility, making it a versatile transceiver.
CRMX upgrade license code available for 99€ upon request. Please contact our inside sales team.
Product type
LED Moving Lights
Colour spectrum
Cold white
Refresh rate
adjustable to 25000 Hz
DMX input
XLR 3-pin male, XLR 5-pin male
DMX output
XLR 3-pin female, XLR 5-pin female
DMX mode
34-channel, 50-channel
DMX Functions
Animation Wheel, Auto Movement, Colour wheel, CTO, CTO Fine, Cyan, Cyan Fine, Device Settings, Dimmer, Dimmer Fine, Focus, Focus Fine, Framing Blade Rotation, Framing Blades, Frost, Gobo Wheel 1, Gobo Wheel 2, Iris, Magenta, Magenta Fine, PAN, PAN FINE, Prism, Rotation Fine Gobo Wheel 1, Rotation Gobo Wheel, Rotation Prism, Set Dimmer Curve, strobe, TILT, TILT FINE, Yellow, Yellow Fine, Zoom, Zoom Fine
High Speed Strobe
> 20 Hz
Standalone modes
Auto Mode, Device Settings, Static
Controls
Enter, Mode, Touch screen, Value Down, Value Up
Indicators
Graphic Display, Touch-Graphic Display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Ambient temperature (operating)
-15 - 45 °C
Power connector
Neutrik powerCON IN / OUT
Housing material
ABS plastic, Metal
Cooling
Heat-pipe cooling system with temperature controlled fans
Illuminance
100,000 lx @ 3m, 39000lx @ 5m
Accessories (included)
2 x Omega Clamp, Power cord
| ARTLIGHT WRLS512 Wireless System (2.4 GHz) Receiver and Transmitter DMX 512 2.4 GHz
DMX512 wireless receiver/transmitter transmits standard DMX512 protocol data ( generated by console ) by wireless way.
No time delay when signal data is transmitting, signal data is real time and reliably.
This product adopts a 2.4G ISM frequency section.
2.4G wireless DMX512 R/T
Input voltage: 5VDC 500mA MIN
Receive Sensitivity: -94dBm
Max transmitting power rate: 20dBm
DMX connector: 3pin male, 3pin female
Communication distance: 400M ( visible distance )
Work frequency section: 2.4G ISM, 126 channels.frequency section
Material: zinc alloy + plastic
Item size: 21 * 2.5 * 2.5cm/8.26 * 0.98 * 0.98in ( L * W * H ) ( 1pc )
Package list:
2 * DMX Wireless Transmitter/Receiver unit
2 * Power Adapter
1 * Specification ( English ) |
- For distribution of RDM and DMX signals on stage
- Within a rig or for fixed installations
- Robust metal housing with mounting rail with M10 thread on the top side
- Compact and lightweight design ideal for mounting on trusses
- DMX input and Thru: XLR 3-pin
- 6 DMX outputs: XLR 3-pin
- Power input: Power Twist
- Power supply: 100 - 240 V ~ 50 / 60 Hz
- Power consumption: 5 watts
- Dimensions: 122 x 126 x 254 mm
- Weight: 1.6 kg
|
- Battery-powered WiFi to W-DMX™ converter
- Allows wireless lighting control via the Cameo iDMX® Controller App
- Receives WiFi signals from all iOS and Android devices
- 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m
- Can be used purely as a W-DMX™ transmitter via the DMX input
- Allows control of conventional DMX devices using the iDMX® Controller App via the DMX output
- Long-life LG Chem lithium-ion battery for reliable operation
- Battery management system prevents overcharging and deep discharging
- Includes power adapter charger, bag and DMX cable
Wireless lighting control at your fingertips using iOS and Android devices with the iDMX® CORE WiFi and W-DMX™ Box. The battery-powered unit is specially designed to work with Cameo\'s iDMX® Controller App. It features a 2.4 GHz W-DMX™ transmitter with an operating range of up to 300 m. 3 and 5-pin DMX inputs and outputs allow use with DMX light desks as well as wireless control of conventional DMX spots via W-DMX™ (the Wi-Fi connection is only between the mobile device and iDMX CORE). The high-capacity LG Chem lithium-ion battery provides up to eight hours of continuous operation for the iDMX® CORE Box, which can be extended by means of external power banks. An integrated battery management system prevents overcharging and deep discharging to ensure long battery life. A power adapter charger, DMX Y cable and bag are included.
Product type
LED PAR Lighting Accessories
Range of W-DMX™
up to 300 m
Range of WiFi
up to 15 m
Radio frequency
2400 MHz
DMX input
3-pin & 5-pin
Controls
On / Off , reset
Indicators
Status LED
Battery capacity
24 Wh
Charging time
6h
Battery operation time at maximum load
up to 8 hours
Housing material
Aluminium
Cabinet colour
Black
Protection class IP
20
Cooling
Convection
Maximum Ambient Temperature
-10° - 45° °C
Dimensions without mounting bracket
Width
85 mm
Height
25 mm
Length
170.5 mm
Weight
0,939 kg |
Reviews
There are no reviews yet.