| Price | €50.00 incl. GR VAT | €294.87 Original price was: €294.87.€250.63Current price is: €250.63. incl. GR VAT | €42.00 Original price was: €42.00.€31.94Current price is: €31.94. incl. GR VAT | €171.77 Original price was: €171.77.€135.31Current price is: €135.31. incl. GR VAT | €121.51 Original price was: €121.51.€109.00Current price is: €109.00. incl. GR VAT | €330.31 Original price was: €330.31.€280.76Current price is: €280.76. incl. GR VAT |
| Content |
Product type
Loudspeaker Chassis
Overall diameter
167.4 mm
Pitch Circle Diameter
154 mm
Cut- out Measurement
144 mm
Diameter of fixing holes
6 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
130 W
Sensitivity (1 W / 1 m)
95 dB
Frequency response
85 - 6000 Hz
Voice Coil Material
Aluminium
Depth of the magnetic gap
8 mm
Fs (Resonance Frequency)
120 Hz
Re (DC resistance)
3 Ohm(s)
Qms (mechanical quality)
6.2
Le (inductance of the voice coil)
0.2 mH
Qes (electrical quality)
0.51
Qts (overall quality)
0.41
Vas (equivalent volume)
3.6
Xmax (maximum displacement)
4.62 mm
Cms (elasticity of the suspension)
0.18 mm/N
Sd (membrane area)
118 cm²
Rms (mechanical loss resistance)
1.17 kg/s
|
- 93 dB Sensitivity 1 W / 1 m
- 130 W Power Handling
- 1.5" Sandwich Voice Coil
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Twin Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
- 1.25'' voice coil Epotex former
- Cone waterproof treatment
- Ferrite magnet circuit
- 92.1 dB sensitivity
|
Line Arrays
Recommended for professional audio midrange from 500Hz-3kHz. Basket is closed. Truncated basket for close
spacing in line-arrays.
SPECIFICATION - Nominal Basket Diameter 6.5“, 165 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 150 W / Music Program 300 W
- Resonance 460 Hz
- Usable Frequency Range 500 Hz - 5.4 kHz
- Sensitivity 97.8
- Magnet Weight 38 oz.
- Gap Height 0.31“, 7.92 mm
- Voice Coil Diameter 1.5“, 38.1 mm
THIELE & Small Parameters - Resonant Frequency (fs) 460 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.33 mH
- Mechanical Q (Qms) 3.13
- Electromagnetic Q (Qes) 1.24
- Total Q (Qts) 0.89
- Compliance Equivalent Volume (Vas) 0.4 liters / 0.01 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 2.7 cc
- Mechanical Compliance of Suspension (Cms) 0.01 mm/N
- BL Product (BL) 11.1 T-M
- Diaphragm Mass inc. Airload (Mms) 9 grams
- Efficiency Bandwidth Product (EBP) 371
- Maximum Linear Excursion (Xmax) 0.2 mm
- Surface Area of Cone (Sd) 133.1 cm²
- Maximum Mechanical Limit (Xlim) 0.8 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed N/A
Vented N/A - Overall Diameter 6.59“, 167 mm/Width
- Baffle Hole Diameter 5.65“, 143.5 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket as standard
- Mounting Holes Diameter 0.23“, 5.7 mm
- Mounting Holes B.C.D. 6.06“, 154 mm
- Depth 2.77“, 70 mm
MATERIAL of Construction - Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Pressed steel basket with truncated sides
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
| 240 W continuous program power capacity |
|
| 38 mm (1.5 in) aluminium voice coil |
|
| 150 – 6000 Hz response |
|
| 96 dB sensitivity |
|
- 130 W + 25 W Power handling
- 1.5" + 1" voice coil
- Single point source providing coherent wave front
- 900 conical dispersion
- Optimal for compact 2-way systems
|
Reviews
There are no reviews yet.