| Content |
The new PH-100 is a remarkably quiet, 1U rackmount headphone distribution amplifier.
Each output has its own amplifier as well as its own level control - so different individual
listening requirements can be met with ease. Multiple PH-100s can also be cascaded
to handle a large number of listeners making it ideal for orchestral, multimedia, education
and trade show applications. The PH-100 is especially handy in the studio environment
because an output from the mixer can send a talkback signal to the Aux input (complete
with level control) of the PH-100 and be distributed to all headphone outputs. This great
cue system makes for more effective communication between engineer/producer and
musicians.
Flexibility is further enhanced with all ten outputs being available both on the front and r
ear panels.
* Ideal for studio, orchestral, education, multimedia, conference and exhibition applications
* 10 headphone outs - each with its own amplifier
* Each input routes to its direct output, plus Aux 1 source (cue feed)
* Multiple inputs: XLR, phone, RCA pin jacks
* +4dBu or -10dBV switchable for balanced inputs
* Individual level controls with peak reading LED
* Stereo or mono input select
* Cascade inputs & outputs for ?daisy chaining? units
* Aux In with level control for cue feed from main mixer
SPECIFICATIONS:
INPUT
INPUT L, R (balanced)
Connector XLR-3-31 x 2, phone x 2
Input Level +4dBU (XLR-3-31), -10dBV (phone)
Input Impedance more than 10k ohm
INPUT L/MONO, R (unbalanced)
Connector RCA pin x 2
Input Level -10dBV
Input Impedance more than 10k ohm
AUX In L/MONO, R (unbalanced)
Connector RCA pin x 2
Input Level -10dBV
Input Impedance more than 10k ohm
CHANNEL IN 1-10 (unbalanced)
Connector RCA pin x 2
Input Level -10dBV
Input Impedance more than 10k ohm
OUTPUT
PHONES OUT 1-10
Connector Phone x 20
(10 each on front/rear, priority on front outputs)
Maximum Output Level 500mW
Impedance 8 ? 32 ohm
Frequency Response 30Hz ? 20kHz +/-1dB
Residual Noise less than -65dBV
THD less than 0.3%
CASCADE OUT L,R
Connector RCA pin x 2
Output Level -10dBV
Frequency Response 30Hz ? 20kHz +/-1dB
S/N less than -80dBV
THD less than 0.1%
PHYSICAL
Dimensions 484 (W) x 49 (H) x 267 (D)
Weight approx. 4kgs.
Power 120V / 230V
Power Consumption 18W | In-ear monitor amplifier for personal monitor applications. High power and \"drummer proof\" headphones output. Dual XLR inputs allow for 2-channel mono or stereo operation. Switchable stereo/mono operation with mix function. Level and Balance/Mix controls. Runs up to 12 hours on a 9 V battery (not included). Integrated current limit protects your ears and headphone. Convenient belt-pack clip included. Mounts easily on a standard mic stand with 5/8” and 3/8” thread.
| Brand |
BEHRINGER |
| Model |
P1 |
| Part Number |
000-AZM |
| Mixing Channels |
2 |
| Warranty |
1 Year |
| Application |
Portable PA |
| Series |
P series |
| Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
| The VOX AMPLUG AC30 Guitar Headphone Amplifier, AC30 voicing. Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast.
The VOX amPlug AC30 is your fastest ticket to great tone – anytime, anywhere! Jamming late at night? Donʼt want to wake the neighbours? Maybe you want to work out a lick with your MP3 player without taking the time to set up your amp. You want to play guitar right now. amPlug is the answer. Simply plug this palm-sized headphone guitar amp directly into your guitar, and enjoy serious guitar sound anywhere, anytime. VOX amPlug AC30 is based on a vintage VOX AC30. Even with its ultra-compact size, amPlug AC-30 perfectly reproduces the complex and warm distortion that is distinctive of a vacuum tube. Using all new analog modeling technology, amPlug delivers full-fledged amp sound. With its completely analog design, great care was also taken with amPlug's gain circuitry. The "AC30" uses two natural-sounding gain stages to reproduce the distinctive AC30 tone. Even the circuit response of the original amp is simulated completely. The simulation extends not only to the response of the tone circuits, but also to the way in which the high frequency and gain are affected when you turn down the volume control of the guitar. Every detail has been faithfully reproduced. With up to fifteen hours of battery life, it's easy to take amPlug anywhere. In addition to practicing at home, it's a great way to warm up before a live performance or on the road. And amPlug is not just a convenient way to get great guitar sound. There's also an AUX input jack so you can jam along with your CD/MP3 player.
The main features of the VOX AMPLUG AC30 include:
- Plugs directly into your guitar, a great-sounding headphone guitar amp that gives you serious sound fast
- AUX in jack lets you jam along with your CD/MP3 player
- 100% analog circuit faithfully simulates the response of the original amps
- AC30 emulates the AC30 top boost sound of a vintage VOX AC30
- Up to 15 hours of battery life with two Alkaline AAA batteries
- Quick and easy setup! Just connect amPlug to your guitar and enjoy serious sound
- Dimensions (W x D x H): 86 x 80 x 31 (mm), 3.39 x 3.15 x 1.22 inches
- Weight: 40g /1.41oz. (not including batteries)
- Included items: two AAA zinc-carbon batteries
| LD Sytems HPA 4 - a compact and powerful headphone amplifier
The LDHPA4 has small dimensions, can handle up to 4 headphones and has an output power with no equal in its class. That means high volume with no distortion. With these features the LDHPA4 is an essential tool for every project- and home studio.
Specifications
Product type
Headphone Amp:
Inputs
2
Input connectors
6.3 mm TRS , RCA
Input impedance
1 k Ohm(s)
Outputs
2
Output connectors
6.3 mm Jack
Power output
4 x 100 mW
Minimum connected impedance
10 Ohm(s)
Frequency response
20 - 20.000 Hz
Controls
4 x headphone volume , Mono/stereo switch
Indicators
Power
Operating voltage
External Power Supply
Operating voltage
24 V DC
Cabinet material
metal
Cabinet surface
painted
Width
94 mm
Height
48 mm
Depth
82 mm
Weight
0,27 kg
Accessories (included)
power supply | The LD Systems HPA 1 is a versatile headphone amplifier with high power output for stage, studio and home recording and is the perfect solution for wired in-ear-monitoring.. The compact device in a rugged, ergonomically shaped plastic housing with soft-touch surface and practical belt clip is very extensively equipped.
In addition to locking XLR connectors for the stereo signal L/R input, the HPA 1 has a balanced 3.5 mm stereo jack as AUX input, which can be used in parallel for clicks or playback. It is protected for safe operation against excessive input levels; a hollow pin socket with negative internal contact enables the connection of a network adapter for fixed operation.
A 3.5 mm stereo jack is provided as earphone and headphone output. Volume level and balance can be set with easy-grip knobs, a push-button switches between the summed mono and stereo signals. A full-fledged limiter is integrated for distortion-free playback and as protection against feedback.
The LD Systems HPA 1 has bi-colour LEDs to facilitate the features overview, which displays the response of the limiter during peaks and the battery status. At 165 grams, the headphone amplifier is distinctly light-weight and can be operated for up to 12 hours thanks to a high quality 9 V block battery.
- Model Name: LDHPA1
- Product Type: headphone amplifier
- Type: 1-channel stereo
- Inputs: Main Input (Stereo), 1 x Aux In (Stereo)
- Input Connections: XLR-F (L + R Input, balanced), 3.5 mm stereo jack (Aux In)
- Input Impedance: 6 kOhm (XLR In), 10 kOhm (3.5 mm jack)
- Input Sensitivity: 3 dBu (XLR In), -6 dBV (3.5 mm jack)
- Max. Input Level: 16 dBu (XLR In), 7 dBV (3.5 mm jack)
- Protection Circuits: Audio Limiter, Max. Input leveling, Power OFF -Mute relay
- Headphone Outputs: 1
- Headphone Output Connectors: 3.5 mm stereo jack
- Power Output: 2 x 1.65 Vrms / 1% THD 33 Ohm Load
- Minimal Connected Impedance per Channel: 16 ohms
- Frequency Response: 20 Hz - 40,000 Hz
- THD 1 kHz Sine: 0.04%
- Controls: Power/Volume, Balance L/R, Stereo/Mono (Focus) switch,
- Indicators: Signal (Green) / Peak (Amber), Battery (low battery: red) / Power LED (Power ON: green)
- Power Supply: 9 V DC block battery, DC jack
- Operating Voltage: 9 V DC
- Power Consumption: Nom. 70 mA / Max. 150 mA
- Housing Material: plastic
- Housing Surface: soft-touch
- Housing Colour: black
- Width: 80 mm
- Height: 42.5 mm
- Depth: 133 mm
- Accessories (included): belt clip, 1 m 3.5 mm stereo jack cable
|
Reviews
There are no reviews yet.