| Content | Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 12 M
Description For a band, monitors play an important role too. The classic
Description monitor for vocals/guitar is a 12" monitor. The PREMIUM PR:O
Description 12 M monitor is designed without compromise exactly for this
Description application to provide the highest possible level of on-stage
Description performance.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 70 Hz ? 19 kHz
Frequency response @ -10dB 63 Hz ? 19 kHz
Speaker 1x 12?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Dimensions (WxHxD) 39 cm x 55,5 cm x 38 cm
Dimensions (WxHxD) 15 1/4? x 21 3/4? x 15?
Weight 16 kg
Weight 35.2 lbs |
Features :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Specifications :
Frequency Range ( –10 dB) : 50 Hz-20 kHz
Frequency Response (± 3 dB) : 75 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 95 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 130 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm
(22.5" x 13.4" x 10.4“)
Net Weight : 19 kg ( 42 lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual
|
Color Black
Input Connections Parallel Neutrik® NL4
Speaker Type Fullrange
Frequency Response (-3 dB) 70 - 20000 Hz
Frequency Response (-10 dB) 55 - 20000 Hz
Internal Crossover Yes
Recommended High-Pass Frequency 60 Hz
Sensitivity 1 W/1 m 99 dB
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
Rotatable Horn No
System Power Handling (Continuous/Program/Peak) 500 Watts
LF Transducer SMX2121
HF Transducer DH3
Crossover Frequency 1600 Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6.4 Ω
Enclosure Material Plywood and MDF with EVCOAT
Flying No
Height 440 mm (17.32“)
Width 364 mm (14.33“)
Depth 573 mm (22.56“)
Weight Net 19.8 kg (43.65 lbs) |
JBL VRX915M 15'' 2-way 800W RMS Stage Monitor
Key Features :
Compact and low-profile for minimal obstruction of audience sightlines
50 x 90 nominal coverage
Bi-amplified or full-range passive operation
Differential Drive woofer with neodymium magnet for high power capacity and very light weight
4" (voice coil) diameter compression driver with neodymium magnet
Specifications:
|
Frequency Range
|
:
|
60 Hz - 20 kHz
| |
Frequency Response
|
:
|
70 Hz - 20 kHz
| |
Coverage Pattern
|
:
|
50 x 90 nominal
| |
Crossover Modes
|
:
|
Passive / Bi-amp
| |
Crossover Frequency
|
:
|
1.1 kHz
| |
Power Rating2 (Continuous / Program / Peak)
|
:
|
Passive Full-Range 800 W / 1600 W / 3200W, 2 hrs1 Passive Full-Range 600 W / 1200 W / 2400W, 100 hrs
| |
System Maximum SPL
|
:
|
127 dB SPL continuous (133 dB SPL peak)
| |
System Sensitivity (1w @ 1m
|
:
|
98 dB SPL
| |
LF Driver
|
:
|
1 x JBL 2265H 380 mm (15 in) Differential Drive?? woofer 8 Ohms
| |
HF Driver
|
|
1 x JBL 2452H, 100 mm (4.0 inch) diameter voice coil, 38 mm (1.5 inch) exit, neodymium magnet compression driver 8 Ohms
| |
Nominal Impedance
|
:
|
8 ohms
| |
Active Tunings
|
:
|
Tunings available at www.jblpro.com
| |
Enclosure
|
:
|
Symmetrical stage monitor, 15/18 mm, plywood
| |
Finish
|
:
|
Black DuraFlex finish
| |
Grille
|
:
|
Powder coated, black, 16 gauge perforated steel with acoustically transparent black screen backing
| |
Input Connectors
|
:
|
Neutrik Speakon NL-4 (x2), one on each end
| |
Dimensions (H x W x D)
|
:
|
629 mm x 432 mm x 324 mm (375 mm stage height) 24.75 in x 17 in x 12.75 in (14.75" stage height)
| |
Net Weight
|
:
|
21 kg (46.0 lb)
|
|
Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 15 X
Description The multi-talented prodigy in the PREMIUM PR:O family. The
Description housing shape enables the PR:O 15 X to be used as a main
Description PA or a monitor speaker.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 60 Hz ? 19 kHz
Frequency response @ -10dB 53 Hz- 19 kHz
Speaker 1x 15?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Rigging points side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD) 47 cm x 61,5 cm x 44,5 cm
Dimensions (WxHxD) 18 1/2? x 24 1/4? x 17 1/2?
Weight 21.6 kg
Weight 47.52 lbs
| MQ 50i is a 2 way compact loudspeaker for indoor wall flush-mounting installation.
Its "bass-reflex” (/ vented) cabinet includes a 5” woofer and a waveguideloaded dome tweeter (to ensure a sound correct dispersion over a wide coverage angle).
It includes a transformer inside for the connection to (100 – 70 V) constant voltage lines, yet it can also be set to 16 Ω (low impedance connection).
The power / mode selection is made by means of the front panel rotary switch.
| Acoustical Specifications |
| Type Of Speaker: |
2 way in wall bass reflex |
|
| Frequency Response: |
180 Hz |
÷ 20 kHz |
| Max SPL @ 1m: |
112 dB |
|
| Horizontal coverage angle: |
120° |
|
| Vertical coverage angle: |
100° |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
90 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
3000 Hz |
|
| TRANSDUCERS |
| Speaker: |
5“ |
|
| Tweeter: |
0.75“ |
|
| INPUT SECTION |
| Input connector: |
2 euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
30 - 20 - 10 - 5 W (100 V) |
|
| CABINET |
| Hardware: |
Body in self-extinguishing plastic |
|
| Colour: |
White / Silver |
|
| Grille: |
Steel |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
270 / 10.62 |
|
| Width: |
195 / 7.67 |
|
| Depth: |
88 / 3.46 |
|
| Net Weight: |
2.21 / 4.87 |
|
| SHIPPING INFORMATION |
| Package height: |
300 / 11.81 |
|
| Package width: |
220 / 8.66 |
|
| Package depth: |
165 / 6.49 |
|
| Shipping Weight: |
2.84 / 6.26 |
|
Reviews
There are no reviews yet.