| Content |
The nano iDSD Black Label is for those who enjoy great music on-the go.
From your phone, amplify your Spotify, Apple Music or Tidal using an Apple CCK cable or OTG cable for Android.
At home or in the office, use the USB3.0 cable provided to connect to your PC.
Res’ing it up!
The nano iDSD Black Label plays Hi-Res audio up to DSD256
so you can enjoy your tunes in the original format just as the artists intended.
Getting into MQA The nano BL is MQA ready. Use it with Tidal Masters on your computer or mobile.
The mighty nano
The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.
It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).
The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!
Brilliant balancing act
The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.
For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.
Listen. Measure.
Fancy getting technical? The nano BL has a Listen option (Minimum Phase Bezier Filter) and a Measure option (Linear Phase Transient-Aligned Filter) for those who like to try a variation to the playback.
We say just switch it on, plug in your device, and listen away.
There is no going wrong with 10 hours of battery life.
The Burr-Brown True Native® chipset means file formats remain unchanged. Listen to music as the artist intended in the format in which it was recorded.
Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.
Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.
Our video tutorials on You Tube show you how.
iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.
See our Tech Note to dig deeper.
This precise, analogue volume control is normally found on items at a much higher price point. Its transparent sonic nature delivers a smooth sound with no loss in music retrieval. It delivers the sonic goods.
Zero Jitter® equals good audio. Is it essential to have a very precisely buffered digital signal before it goes to a DAC.
We pushed the envelope even further by doing this not only with the nano iDSD BL\'s USB input, but the rest of the digital interfaces as well.
This unit has up to 10 hours of non-stop playing time. Always make sure you switch it on first and then plug in your device.
|
General
|
|
| Input(rear): |
USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in) |
| Output(rear)； |
1 x audio fixed line out L+R 3.5mm |
| Digital Filter: |
2 positions. 2 filters |
| Outputs(front): |
2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’ |
|
DAC
|
|
| DAC: |
DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing |
| Clock: |
Low-jitter crystal clock |
| Audio Formats: |
DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8 |
|
DXD 384/352.8kHz |
|
PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz |
|
MQA 88.2/96/176.4/192kHz filters |
| Filter–PCM: |
Listen (transient optimised minimum phase) |
|
Measure (frequency response optmised) |
| –DSD: |
Listen (extended bandwidth transient optimised) |
|
Measure (narrow bandwidth, low output band noise optimised) |
| –DXD: |
Fixed Bit-Perfect Processing |
| –MQA: |
Fixed MQA Filter |
|
Headphone Amplifier
|
|
| Amplifier: |
Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity |
| Volume Control: |
3.5mm TRRS with Balanced compatible wiring |
| Dynamic Range(including DAC): |
> 109dB(A) @ 3v (Direct) |
|
> 107dB(A) @ 0.5V (iEMatch®) |
| THD &N (@ 125mW/30R): |
< 0.005% |
| Max. Output ( 3.5V @ 600Ω Load (Direct) (20mW/600Ω) |
|
> 2.9V @ 30Ω Load (Direct) (285mW/30Ω) |
|
> 1.7V @ 15Ω Load (Direct) (200mW/15Ω) |
| Output Impedance : |
< = 1Ω (Direct) |
|
< = 4Ω (iEMatchsup>®) |
| Channel Separation: |
> 79dB @ 600Ω Load (Direct) |
|
> 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring) |
|
Line Output
|
|
| Dynamic Range(Line): |
> 109dB(A) |
| THD & N(0dBFS Line): |
< 0.004% |
| Output Voltage(Line): : |
2.15V (+/-0.05V) |
| Output Impedance: |
< 240Ω |
| Channel Separation: |
> 99dB (@ 1kHz) |
| Jitter(correlated): |
Below test set limit |
| Dimensions: |
96(l) x 64(w) x 25.5(h)mm |
| Weight: |
139g (0.31 Ibs) |
| Warranty period: |
12 months |
|
ARTSOUND VD-238 VGA Video and RCA Audio Converter TO HDMI
This compact VGA with Audio to HDMI Converter enables you to convert a VGA video signal and separate RCA audio signal to an HDMI output, and in this way connect your VGA/RCA sources to an HDMI display for a full audiovisual experience.
On output, the converter supports resolutions up to Full HD 1080p and computer resolutions up to 1600 x 1200. It converts the input resolution to the closest output resolution.
Key Features
- Convert VGA and L/R RCA signals to an HDMI output
- VGA and L/R RCA inputs
- HDMI output
- Embeds L/R RCA audio into the HDMI output
- Supports output resolutions up to 1080p and 1600 x 1200
- Supports data rates up to 6.75 Gbps
| Input |
1 x VGA
1 x L/R RCA |
| Output |
1 x HDMI 1.2a |
| Input Video Signal |
0.5 - 1.0 V p-p |
| Input DDC Signal |
5 V p-p (TTL) |
| Supported Input Resolutions |
640 x 480 at 60 / 75 Hz
800 x 600 60 / 75 Hz
1024 x 768 60 / 75 Hz
1280 x 720 60 / 75 Hz
1280 x 768 60 / 75 Hz
1280 x 960 60 / 75 Hz
1280 x 1024 60 / 75 Hz |
| Supported Output Resolutions |
480i, 576i, 480p, 576p, 720p, 1080i, 1080p
Computer Resolutions: up to 1600 x 1200 (if available on the HDMI display)
*The input resolution is automatically converted to the closest output resolution. |
| Frequency |
Up to 165 MHz |
| Video Amplifier Bandwidth |
1.65 Gbps |
| Power Supply |
5 VDC, 1 A |
| Power Consumption |
5 W |
| Operating Temperature |
32 to 158°F (0 to 70°C) |
| Storage Temperature |
14 to 176°F (-10 to 80°C) |
| Operating Humidity |
10 to 85% RH (no condensation) |
| Storage Humidity |
5 to 95% RH (no condensation) |
| Dimensions |
3.5 x 1 x 2.7" (8.9 x 2.5 x 6.9 cm) |
| Weight |
0.24 lb (109 g) |
|
The ADI-2 is a both compact and extremely flexible 2-Channel Hi-End AD/DA-converter. The small 9.5' unit offers top notch AD/DA-conversion from/to SPDIF, AES and ADAT, at up to 192 kHz. Its ability to use SPDIF, AES and ADAT format provides outstanding compatibility. Whatever it is - simply get connected! Key features of this extraordinary flexible converter are balanced inputs and outputs, monitoring via headphone out, SteadyClock for optimal converter quality, 3-stage hardware input and output level control, and its capability to run on a wide range of power supplied. | ARTSOUND VD-242 VGA HDMI Adapter Cable 3.5mm Audio Video Converter Cable TV Box PS3 PS4 HDTV PC Laptop ProjectorVGA To HDMI Cable
- Application:Projector,Computer,Multimedia,Monitor,TV BOX,Television
- Shielding:Braid
- Gender:Male-Female
- Connector A:VGA,AUX
- Model Number:VGA To HDMI Adapter with Audio
- Type:VGA Cables
1. Main function: This product can bring computer PC, notebook, DVD player, etc.
VGA signal, processed by smart chip, to connect the device to HDMI
On the high-definition display device of the interface, it converts an analog signal into a digital signal.
HD converter to enjoy the high-definition video and feast.
Features:
1. One way VGA analog video; standard HDMI digital signal output, usb charging
With audio
2. Support VGA video input format: VGA, XGA, SVGA, SXGA, UGA
3. Support audio format: Analog Stereo 2.1 (FL/FR)
4. HDMI output format: up to 1080P/60Hz (output and input format synchronization, frequency synchronization)
5. Support HDCP 1.2 version
6. Easy to install, no driver required, plug and play
7. Low power consumption, externally powered by USB to Micro power cord
8. High-grade aluminum alloy casing, black appearance, simple and generous
9. Small size, strong mobility, easy to carry out
Package Included:
1 x VGA to HDMI Adapter With Audio
|
- With 2.4G WiFi, Mirascreen G7M wireless display dongle is powered by brand-new chipset AM8268. Provides faster reaction speed and stable performance.
- Support mirroring and streaming your mobile devices to TV or projector or any HD display wirelessly. Turn your HDTV into a smart TV, use your mobile devices as the controller.
- Works with smartphones and tablet, suitable for Android and iOS OS. You can enjoy wireless display with your smart devices.
- Suitable for Miracast, DLNA, for Airplay to sync cast photo, video, music, office files, web browser, live camera from for iPhone and Android smart phone or tablet PC to large screen TV or Projector via WiFi, designed for PowerPoint presentation and video meeting.
- With HD interface, supports 1080P ultra HD wireless video transmission. Bring you ultra-clear visual enjoyment.
|
Micro DAC is a USB digital-to-analog (DAC) converter with two outputs, one analog and one digital (optical). Itʼs ideal for converting the audio from your computer into a high-quality analog format without needing to carry anything larger than a flash drive. The sound quality available from the typical headphone jack on a portable device or coming from the standard-issue soundcard found in virtually every computer leaves a lot to be desired. Micro DAC delivers a marked upgrade in sound quality, compared to just plugging your headphones directly into your unitʼs headphone jack.
Use the 1/8-inch analog output to connect any headphones, and enjoy vibrant high-fidelity sound. There is a gain switch that boosts the signal level, so you can drive even high-impedance headphones to a robust loudness level. And since virtually all high-quality audio equipment has an optical digital input, Micro DACʼs optical digital output is perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.
Micro DAC has a rugged aluminum housing and is USB-bus-powered. Getting professional-quality audio from your computer couldnʼt be easier!
- Aluminum housing for ruggedness while traveling
- 1/8" headphone output
- 1/8" coaxial digital output
- Gain switch for high-impedance headphones, to easily drive any model
- Slim, small design for portability
- Professional audio quality
- 16-bit/48kHz audio conversion over a USB connection
- USB-bus-powered
Requirements - Windows 7 - Windows 10 Compatible
- OSx 10.7.5 - 10.11 Compatible
|
Reviews
There are no reviews yet.