Content |
The nano iDSD Black Label is for those who enjoy great music on-the go.
From your phone, amplify your Spotify, Apple Music or Tidal using an Apple CCK cable or OTG cable for Android.
At home or in the office, use the USB3.0 cable provided to connect to your PC.
Res’ing it up!
The nano iDSD Black Label plays Hi-Res audio up to DSD256 so you can enjoy your tunes in the original format just as the artists intended.
Getting into MQA The nano BL is MQA ready. Use it with Tidal Masters on your computer or mobile.
The mighty nano
The nano iDSD Black Label is small but mighty with 10x more amplification power than an iPhone.
It can drive most headphones and has our iEMatch technology built-in, so it can work with In-Ear-Monitors (IEMs).
The in-built iFi iPurifier means it delivers clean, quality music with no buzz, no hiss and no fuss!
Brilliant balancing act
The iFi exclusive S-Balanced circuit provides all the benefits of balanced outputs such as low-noise and less distortion when used with headphones and IEMs fitted with balanced wiring.
For single-ended headphones, S-Balanced cuts crosstalk in half. The benefits are ‘clearly’ audible.
Listen. Measure.
Fancy getting technical? The nano BL has a Listen option (Minimum Phase Bezier Filter) and a Measure option (Linear Phase Transient-Aligned Filter) for those who like to try a variation to the playback.
We say just switch it on, plug in your device, and listen away.
There is no going wrong with 10 hours of battery life.
The Burr-Brown True Native® chipset means file formats remain unchanged. Listen to music as the artist intended in the format in which it was recorded.
Hi-Res True Native® playback of all music formats from MP3 to DSD256, PCM384 and DXD384.
Listen to Master Quality Authenticated audio straight out of the box. Connect to Tidal Masters and check the option to stream MQA.
Our video tutorials on You Tube show you how.
iFi’s exclusive S-Balanced® circuit delivers maximum performance from single-ended and balanced headphones alike.
See our Tech Note to dig deeper.
This precise, analogue volume control is normally found on items at a much higher price point. Its transparent sonic nature delivers a smooth sound with no loss in music retrieval. It delivers the sonic goods.
Zero Jitter® equals good audio. Is it essential to have a very precisely buffered digital signal before it goes to a DAC.
We pushed the envelope even further by doing this not only with the nano iDSD BL\'s USB input, but the rest of the digital interfaces as well.
This unit has up to 10 hours of non-stop playing time. Always make sure you switch it on first and then plug in your device.
General
|
|
Input(rear): |
USB2.0 type A ‘OTG’ Socket (with iPurifier® technology built-in) |
Output(rear); |
1 x audio fixed line out L+R 3.5mm |
Digital Filter: |
2 positions. 2 filters |
Outputs(front): |
2 x 3.5mm headphone audio outputs. ‘Direct’ and ‘iEMatch®’ |
DAC
|
|
DAC: |
DSD, DXD, PCM DAC by Burr Brown Bit-Perfect DSD processing, Bit-Perfect DXD processing |
Clock: |
Low-jitter crystal clock |
Audio Formats: |
DSD 256/128/64/12.4/11.2/6.2/5.6/3.1/2.8 |
|
DXD 384/352.8kHz |
|
PCM 384/352.8/192/176.4/96/88.2/48/44.1kHz |
|
MQA 88.2/96/176.4/192kHz filters |
Filter–PCM: |
Listen (transient optimised minimum phase) |
|
Measure (frequency response optmised) |
–DSD: |
Listen (extended bandwidth transient optimised) |
|
Measure (narrow bandwidth, low output band noise optimised) |
–DXD: |
Fixed Bit-Perfect Processing |
–MQA: |
Fixed MQA Filter |
Headphone Amplifier
|
|
Amplifier: |
Dual Mono 2 x 285mW Direct Drive, coupling capacitor free circuit for highest fidelity |
Volume Control: |
3.5mm TRRS with Balanced compatible wiring |
Dynamic Range(including DAC): |
> 109dB(A) @ 3v (Direct) |
|
> 107dB(A) @ 0.5V (iEMatch®) |
THD &N (@ 125mW/30R): |
< 0.005% |
Max. Output ( 3.5V @ 600Ω Load (Direct) (20mW/600Ω) |
|
> 2.9V @ 30Ω Load (Direct) (285mW/30Ω) |
|
> 1.7V @ 15Ω Load (Direct) (200mW/15Ω) |
Output Impedance : |
< = 1Ω (Direct) |
|
< = 4Ω (iEMatchsup>®) |
Channel Separation: |
> 79dB @ 600Ω Load (Direct) |
|
> 79dB @ 15Ω Load (Direct) (1kHz, TRRS plug Balanced wiring) |
Line Output
|
|
Dynamic Range(Line): |
> 109dB(A) |
THD & N(0dBFS Line): |
< 0.004% |
Output Voltage(Line): : |
2.15V (+/-0.05V) |
Output Impedance: |
< 240Ω |
Channel Separation: |
> 99dB (@ 1kHz) |
Jitter(correlated): |
Below test set limit |
Dimensions: |
96(l) x 64(w) x 25.5(h)mm |
Weight: |
139g (0.31 Ibs) |
Warranty period: |
12 months |
|
Bluetooth Receiver
- Smartphones and tablet computers offer the possibility to stream music wirelessly with Bluetooth. Bluetooth Box E is the cost-effective solution to use these possibility in your own hifi system. Not only standard SBC codecs are supported, but also audiophile aptX with almost CD-quality can be received. Pairing of mobile devices with Bluetooth Box E is done fast and playback works reliably within a distance up to 10m with direct visibility. Up to 8 different smartphones and tablets are memorized. Analogue and digital connection to amplifier or external D/A converter is provided for ultimate flexibility.
Technical specifications Pro-Ject BT Box EEffective range of wireless signal up to 10m in case of direct visibilityLine-level output: 1 x RCA/CinchOutput voltage: 2VrmsDigital outputs: 1 x optical (TOSlink®)BT version: 2.1 + EDRSupported codecs: aptX, SBC, A2DP BT profileFrequency: 2402 ~ 2480 MHzSensitivity: - 84dBmMaximum TX power +4dBmOutboard power supply: 9V/300mA DCPower consumption: 100mA/9V DC,<1W in standbyDimensions W x H x D (D with sockets): 120 x 32 x 100 mmWeight: 250g without power supply
|
Housed in an elegant compact chassis that occupies just over 1 square foot of desktop or shelf space, the HD-AMP1 digital integrated amplifier features high resolution D/A conversion and compatibility with a wide range of uncompressed high resolution audio formats, including WAV, ALAC, FLAC and AIFF, and is also capable of decoding DSD tracks with compatibility of all 3 DSD sampling frequencies - 2.6/5.2/11.2-MHz (DSD is the audio format of SACD).
The powerful digital amplifier section features cool-running wide bandwidth and wide dynamic range Class D audiophile amplifier technology, delivering 35 watts per channel into 8 ohms and 70 watts per channel into 4 ohms, providing compatibility with the widest range of speaker types and impedances.
Featuring 2 USB ports, 1 on the front and 1 on the back, the HD-AMP1 lets you connect your favorite iDevice or USB drive to the front panel USB port, and your PC or Mac to the rear panel USB-B port to stream your high resolution audio tracks, and it features advanced noise isolation to guard against digital noise from degrading the high resolution sound.
Equipped with Marantz Musical Digital Filtering, our proprietary DSP filter technology, the HD-AMP1 lets you choose from 2 digital filter algorithms so you can precisely tailor the sound to your liking. The reference-class ESS SABRE DAC features 32-bit/384-kHz decoding for the highest resolution and widest dynamic range with today's advanced audiophile hi-res tracks.
The analog sections feature our exclusive HDAM-SA2 modules, including the analog front end block, the D/A converter block and in the dedicated headphone amplifier block.
There are 2 optical and 1 coaxial digital inputs, along with 2 analog inputs, so you can connect the widest range of source components.
The elegant chassis features a solid brushed aluminum front panel along with luxurious woodtone side panels.
Standby Consumption in W | 0.3 |
Maximum Dimensions (W x D x H) in inches | 12.0 x 13.9 x 4.2 |
| High Grade DAC - Digital / Optical to Analogue Stereo Audio Converter - SPDIF - TOSlink / Coaxial to Stereo Left / Right RCA
This analog digital audio converter is designed for home and professional audio conversion. Converts Toslink coaxial or optical digital audio signals into analog L / R audio signals for connection to an external device such as an amplifier via standard RCA connectors. The main features that allow us to be used even in professional contexts are:
- Supports sampling rate at 32.44.1.48 and 96 KHz.
- 24-bit S / PDIF incoming bit stream on the left and right channels.
- Converts coaxial or Toslink digital audio signals into analog L / R audio.
- Provides transmission of signals free of electromagnetic disturbances.
- Easy to install and easy to use.
Content of the package
- Main unit (analog digital audio converter)
- 5V / DC power supply.
- User Manual
|
The Extremo DAC can be connected via S/PDIF
or AES/EBU to any existing digital source like
CD-player, DAT, CD-transport.
A I2S digital input allows a direct link with
M192 CD-transport for the best audio performance.
CS8416 - a very low jitter 192kHz digital receiver from
Cirrus Logic.
AD1896 - an high dynamic 192/24 upsampler from
Analog
Devices 2 x PCM1792 - 140 dB, 192/24 DAC from Texas
|
Super DAC is a USB digital to analog converter with stereo RCA analog outputs and both coaxial and optical digital outputs. With audiophile-grade Wolfson DAC/ADCs, the M-Audio Super DAC performs 24-bit/192kHz high-definition audio conversion over a USB 2.0 connection. This results in the highest possible audio quality, which is critical for users who want to connect their audio equipment to their computer but are not satisfied with the sound quality of the typical computer sound card or the compression limitations of a Bluetooth connection. Six sampling rates between 44.1 and 192kHz are user selectable so you can achieve the exact performance level needed for any given circumstance.
Super DAC has a built-in high quality headphone amplifier with both ¼-inch and 1/8-inch jacks, for connecting any headphones directly without the need for an adapter. It also features analog stereo RCA line outs and coaxial and optical digital output connections, so you can easily connect a wide array of external equipment. Since virtually all high-quality audio equipment has a digital input, Super DACʼs optical and coaxial digital outputs are perfect for driving that equipment with a pure digital signal—especially valuable since most computers do not have a digital output.
Super DAC is USB-bus-powered or can use an optional AC wall adapter (not included). The M-Audio Super DAC is the answer when you require reference-quality sound from your computer.
Features - 24-bit/192kHz high-definition audio conversion over a USB 2.0 connection
- High-quality headphone amplifier with 1/4" and 1/8" outputs
- Stereo analog line in
- Stereo analog RCA line outputs
- Coaxial and optical digital outputs
- Wolfson digital conversion
- USB-bus-powered
Requirements - Windows XP - Windows 10 Compatible
- OSx 10.7.5 - 10.11 Compatible
|
Reviews
There are no reviews yet.