Content |
*6 Input 21 Output Matrix *Allocate BGM Source to Desired Output Zone *Clear LED/LCD Visual Display Shows Status of Each Area/Zone *Interface for Remote Zone Controllers L-500(21 Zones) *Interface for Remote Paging Microphones RM-500(4 No.) *Adoption of RS-422/RS-232 Communication Method Supporting Long Distance *Conveient Connection with 7-Ch Power AMP with Adoption of Lump-sum Output terminal *Power Source: DC 24V *Weight: 4.3kg/9.5Ib *Dimensions(W×H×D): 482×132×380mm/19×5.2×15in
|
LD Systems ZONE 622 2-Zone Mixer
The ZONE 622 is a particularly compact 1U zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The device has all the essential functions, an input for an external emergency announcement system with its own volume control, and a connection to the remote-controlled switching mute. The ZONE 622 is suitable as a sound system for separate zones in restaurants, clubs, hotels, fitness centres, and for presentations.
The two balanced microphone channels with stereo jack inputs are equipped with controls for Gain, Talkover volume, Talkover attenuation, 12V phantom power and a shared 2-band EQ. The line channels 1 and 2 can also be used to connect unbalanced microphones, and channel 6 is specially designed for balanced FOH signals. The stereo input channels of the ZONE 622 have a Cue button and volume control signal display, and the channels 1-5 have an additional gain trimmer. Furthermore, the zone mixer has a 3.5 mm mini jack input and a USB port , that is used as a Stereo Input and Output (Recording Out). So you can use the ZONE 622 as an external audio interface.
The stereo and mono output sections have their own meters, 2-band EQ, trimmer for adjusting the maximum output level, as well as electronically balanced jack plugs and terminal block connectors. In addition, the stereo section has unbalanced RCA jacks. An adjustable headphone jack for previewing and a recording output complete the equipment for the ZONE 622.
Product type
Mixers
Type
Installations
Number of Zones
2 (Master, Zone)
Type
stereo
Installation Height
1 U
Total Input Channels
8 (2x Mic, 2x Mic/Line, 3x Line, 1x FOH)
Frequency response
20 - 40000 Hz
Microphone channels
2 (with phantom power 12 V)
Microphone Channel Connections
6.3 mm stereo jack (balanced)
Microphone channel controls
1 x EQ Hi , 1 x EQ Low , 1 x Talk Over Damp , 1 x Talk Over Level , Gain , On / Off
Microphone Channels Display Elements
On-LED
Microphone Channels Input Impedance
4 kOhm
Microphone Channels Input Sensitivity
6.1 mV
Microphone Channels THD
0.08%
Line / Microphone Channels
2
Line / microphone input connectors
2 x RCA , 3.5 mm stereo jack (input 1) , 6.3 mm stereo jack (balanced)
Line / microphone channel controls
Cue , level , mic/lline , Trim
Line / Microphone Display Elements
Cue-LED , Signa-LED
Line Channels
3
Line input connectors
Input 3-4: 2 x RCA , Input 5: 2 x RCA + USB
Line Channel Controls
Cue , level , Trim
Line Channel Display Elements
Cue-LED , Signa-LED
Line Channel Input Impedance
4 kOhm
Line Channels Input Sensitivity
1.5 V
Line Channels THD
0.03%
input sensitivity AUX/Line
3 V
FOH Channels
1
FOH Input Connections
6.3 mm stereo jack (2 x balanced)
FOH Input Controls
Cue , level
FOH Input Display Elements
Cue-LED , Signa-LED
Line outputs
3 (Master - Stereo, Zone - Mono, Rec - Stereo)
Output Connectors Master
6.3 mm stereo jack (2 x balanced) , RCA (x2) , terminal block
Master Controls
EQ Hi , EQ Low , level , Max. Level
Master Display Elements
5-Segment Level Meter
Master Output Levels
(balanced) 24 dBu , (unbalanced) 18 dBu
Zone Output Connections
6.3 mm stereo jack (balanced) , terminal block
Zone Controls
EQ Hi , EQ Low , level , Max. Level , Source Input 1-5/Mix
Zone Display Elements
5-Segment Level Meter
Zone Output Levels
24 (balanced/ unbalanced) dBu
Output Connections Rec
2 x RCA
Headphones ouput
1
Headphone Out Port
6.3 mm TRS
Headphone Output Controls
Cue Volume
Headphone Output Voltage
(@ 32 Ohm) 1.25 V
Additional Inputs
2 (Emergency Input, Output Mute)
Connections Additional Inputs
terminal block
Additional Input Controls
Level Emergency Input
Additional Controls
power switch
Additional Display Elements
Power-LED
Operating voltage
220 - 250 V AC, 50 Hz
Mains connector
IEC power connector
Power consumption
18 W
Fuse
T 500 mAL / 250 V
Width
485 mm
Height
44 mm
Depth
179 mm
Weight
2,4 kg
Accessories (included)
Power cord , terminal blocks
|
Power Output Level: QD4240
8ohm (Quad Ch) 40W
4ohm (Quad Ch) 60W
8ohm bridged mono 120W
Input Sensitivity (8ohm, 1kHz) 0.775Vrms
Input Impedance 20kohm Balanced
Slew Rate (8ohm, Full Swing) ±30V/?sec
Frequency Response (±0.5dB) 20kHz ~ 50kHz
T.H.D. (f=20Hz~20kHz, Half Power) 0.03%
Signal to Noise Ratio 105dB
Damping Factor (8ohm, 1kHz) 100
Rasidual Noise -85dB
Channel Separation (8ohm, 1kHz) 80dB
Voltage Gain (4ohm) 26dB 29dB 32dB
Power Source 100-120VAC or 220-240VAC ; 50/60Hz
(supplied AC mains transformer depends on country requirements)
Power Consumption 300W 420W 770W
Weight 11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb
Dimensions 482(W) x 88(H) x 369(D) mm
/19(W) x 3.5(H) x 14.5(D) in
|
- 3 zones with routing facility of all input channels as desired
- 5 input channels with recessed gain controls on the rear panel, signal LED and super smooth dual-rail channel faders
- 2 microphone channels with level control, LED level meter, 3-way equalizer and talkover button
- Talkover level and response time adjustable
- Pre-fader listening (CUE) to the stereo input channels via adjustable headphone output
- Color illuminated rotary controls and rubber buttons
- Zone outputs with level control, 3-way equalizer and 10-digit stereo LED level meter
- 2 record outputs (independent of the master channels) with routing facility of all zone outputs as desired
- Inputs: 8 x line (stereo RCA), 2x line/phono (stereo RCA), switchable; 2 x microphone (XLR/6.3 mm jack) and headphones (6.3 mm jack)
- Outputs: 3 x master (optionally 3-pin XLR or stereo RCA) and 2 x record (stereo RCA)
- Operation via supplied power unit
- Rack installation, 2 U
- Ideal for restaurants, bars, theme parks, hotels and all applications where microphones need to be mixed with music (e.g. karaoke)
Power supply: |
230 V AC, 50 Hz |
Protection class: |
Protection class II |
Power connection: |
Power supply cord with Euro plug (provided) |
Frequency range: |
20 - 20000 Hz |
S/N ratio: |
>60 dB line
>70 dB phono |
THD: |
Line/phono <0,02 % at 1 kHz |
Gain: |
Microphone 52 dB
Line 17 dB
Phono 53 dB |
Housing color: |
Black |
Zone output: |
3 adjustable zones |
Control elements: |
Power switch, regular talkover, source selector |
Status LED: |
Signal, chanal level meter, master level meter, peak, chanal source; CUE, Talkover, ON AIR, Routing |
Connections: |
Input: Microphone via 2 x 3-pin XLR/6.35mm jack (F) combination socket (mounting version)
Input: line/phono via 2 x stereo RCA
Input: line via 8 x stereo RCA
Output: master via 3 x 3-pin XLR
Output: master via 3 x stereo RCA
Output: rec. via 2 x stereo RCA
Output: headphones via 1 x 6.3-mm-jack (bal.) |
Channels: |
Input chanel: 2 x stereo with Line-Line/Phono switch via RCA, channel control via fader, 3-band tone control EQ, Routing master bus switch, gain control, source selector, CUE switch
Input chanel: 3 x stereo with Line-line switch via RCA, channel control via fader, Routing master bus switch, gain control, source selector, CUE switch
Microphon chanal: 2 x mono via Combination socket (XLR/jack), channel control via Rotary dial, ON AIR switch, Routing master bus switch, Talkover switch,
Master output: 3 x stereo via XLR or RCA, channel control via Rotary dial, 3-band tone control EQ
Rec. output: 1 x stereo via RCA, Routing master bus switch,
Headphones output: 1 x stereo via Jack, channel control via Rotary dial, Cue-mix-function, |
Housing design: |
(19") 48.3 cm rack installation 2 U |
Dimensions: |
Width: 48,3 cm
Depth: 14,8 cm
Height: 8,9 cm |
Weight: |
3,10 kg |
|
The JBL Commercial CSM-21 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-21 features two stereo music inputs with gain control and clip LEDs, and one stereo output with an active crossover and a dedicated subwoofer output. | Χαρακτηριστικά:Inputs:Gain-Sharing Automatic Mic Mixing Eight XLR Inputs with Level controls & Sig/OL indicators Each can be Mic, Mic with 48V phantom, or Line-level Add up to 64 more gain-sharing inputs by cascading AM2 Automixers Add other audio sources, line inputs and remote controls by connecting to HAL systemOutputs (all mono)XLR Main with Mic/Line switch, Level control & Sig/OL Rane RAD and Cascade IN RJ-45 Ports Cascade In Port connects up to seven additional Rane AM2 mixers, (eight units total) RAD Port may send Output to HAL (DSP/control). It is possible to cascade the AM2 mix into Halogen's Gain-Sharing Auto Mixer or Room Combine Processor DSP, so that all mics connected to HAL may gain-share |
Reviews
There are no reviews yet.