| Content |
The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“. | LF B&C Speakers 15-PS76 Subwoofer Speaker 15 inch 1100W, 99dB
| Product type |
Cone driver |
| Brand |
B&C Speakers |
| Reference |
15PS76 |
| Product code |
ALT15PS768 |
Informations
|
| Nominal impedance |
8 ohm |
| Dimensional category |
15.5 inch |
| Frequency coverage type |
Sub, Low, Midbass |
| Manufacturer sensitivity |
99 dB |
| Calculated sensitivity |
96.92 dB |
| Nominal power handling |
550 W |
| Bandwidth |
40÷2000 Hz |
Fundamental parameters
|
| Sd |
855 cm² |
| Mms |
106 gr |
| Le |
1.3 mH |
| Re |
5 ohm |
| BL |
22.1 T.m |
Small signal parameters
|
| Fs |
38 Hz |
| Qes |
0.28 |
| Qms |
5.2 |
| Qts |
0.26 |
| Vas |
164 L |
Datas
|
| Xmax |
±7.5 mm |
| Calculated Xmax |
±7.6667 mm |
| EBP |
136 Hz |
| Zmin |
6.3 ohm |
| Fs / Qts |
146 Hz |
| Vas * Qts² |
11.09 L |
| Efficiency |
3.3 % |
| Calculated efficiency |
3.09 % |
| Weight |
~8.7 kg |
Dimensions
|
| Voice coil diameter |
3 inch |
| Winding depth |
19 mm |
| Gap height |
11 mm |
| Outside diameter |
393 mm |
| Baffle cutout diameter |
354 mm |
| Front thickness |
16 mm |
| Depth after front |
155 mm |
Shape & Materials
|
| Front chape |
Cylindrical |
| Magnet type |
Ferrite |
| Basket masterial |
Aluminium |
| Winding material |
Copper |
| Voice coil former |
Glass fiber |
| Surround material |
Cloth |
EAN 8059300642818 |
| 1200 W continuous program power capacity |
|
| 76 mm (3 in) copper voice coil |
|
| 40 – 2000 Hz response |
|
| 100.5 dB sensitivity |
|
| Aluminium demodulating ring allows a very low distortion figure |
|
| Neodymium ring magnet allows a very high force factor and linear excursion |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
|
KAPPA PRO-15A Professional Series
Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 500 W / Music Program 1000 W
- Resonance 47 Hz
- Usable Frequency Range 46 Hz - 4 kHz
- Sensitivity 101
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 47 Hz
- DC Resistance (Re) 5.23
- Coil Inductance (Le) 1.01 mH
- Mechanical Q (Qms) 8.01
- Electromagnetic Q (Qes) 0.40
- Total Q (Qts) 0.38
- Compliance Equivalent Volume (Vas) 167.7 liters / 5.9 cu. ft.
- Peak Diaphragm Displacement Volume 274 cc
- Mechanical Compliance of Suspension (Cms) 0.16 mm/N
- BL Product (BL) 16.6 T-M
- Diaphragm Mass inc. Airload (Mms) 72 grams
- Efficiency Bandwidth Product (EBP) 118
- Maximum Linear Excursion (Xmax) 3.2 mm
- Surface Area of Cone (Sd) 856.3 cm²
- Maximum Mechanical Limit (Xlim) 13.2 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 54-184 liters/1.9-6.5 cu.ft.
- Overall Diameter 15.32“, 389.1 mm
- Baffle Hole Diameter 14.0“, 355.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.28“, 7.1 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.06“, 154 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Die-cast aluminum basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
| Nominal diameter | 15in/381mm | | Power Rating | 400W | | Sensitivity | 98dB | | Frequency Range | 42-3500Hz | Voice coil
diameter | 3in/76.2mm | | Magnet type | Neodymium | | Weight | 2.6kg/5.7lb |
| Recommended for professional audio mid-range applications in a sealed cabinet, or as a mid-bass in a ventedsatellite enclosure.
Product type
Loudspeaker Chassis
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Depth of the magnetic gap
6.35 mm
Fs (Resonance Frequency)
41 Hz
Re (DC resistance)
5.88 Ohm(s)
Qms (mechanical quality)
7.23
Le (inductance of the voice coil)
0.84 mH
Qes (electrical quality)
1.53
Qts (overall quality)
1.26
Vas (equivalent volume)
260
BL (power factor)
7.7 T/m
Xmax (maximum displacement)
3.8 mm
Cms (elasticity of the suspension)
0.25 mm/N
Sd (membrane area)
856.3 cm²
|
Reviews
There are no reviews yet.