JBL 8320 Compact Cinema Surround Speaker 150 Watts

The 8320 Cinema Surround Speaker offers high power handling, high sensitivity, and extended bass response in a very compact enclosure. The twoway 8320’s reliability and performance features position it as the ideal low cost, compact surround for the extended dynamic range required by digital sound formats.   

Features :    
50 Hz to 20 kHz Frequency Range
High Sensitivity, 91 dB SPL, 1 W, 1 m (3.3 ft)
High Power Handling Capability: 150 watts continuous pink noise
Internal Thermomaster® technology allows for unprecedented high frequency power in a compact molded enclosure.
Convenient mounting design uses JBL QuickMount™, Omnimount® or APC Multimount brackets
Special cabinet shape incorporates 20° angled front baffle
SMPTE/ISO2969 Curve X high frequency de-emphasis
Lightweight, rigid molded enclosure
Input terminals located on top of cabinet for quick access
Uniform horizontal and vertical coverage
THX® Approved
 
Specifications : 
Frequency Range (-10 dB):    50 Hz - 20 kHz 
Frequency Response (±3 dB):    65 Hz - 18 kHz 
Power Rating:    150 watts continuous
pink noise
600 watts peak 
Sensitivity (1W/1m):    94 dB-SPL half-space / wall-mounted
91 dB-SPL free-field 
Maximum Peak SPL:    122 dB/1m  
Nominal Impedance:    8 ohms  
Hor. Coverage Angle (-6 dB):    100° averaged 400 Hz to 12 kHz 
Vert. Coverage Angle (-6 dB):    90° averaged 400 Hz to 12 kHz  
Directivity Factor (Q):    7 averaged 400 Hz to 12 kHz 
Directivity Index (DI):    8.4 dB averaged 400 Hz to 12 kHz 
Crossover Frequency:    3 kHz 
High Frequency Contour:    ISO2969 Curve X surround contour 
Polarity:    EIA (Positive voltage to RED terminal gives forward cone motion) 
Low Freq Transducer Nominal Diameter:    200 mm (8 in)
38 mm (1.5 in) voice coil 
High Freq Transducer Nominal Diameter:    25 mm (1 in)
25 mm (1 in) voice coil 
Downward Firing Angle:    Nominal 20° when mounted flush on back panel 
Enclosure Material:    Textured Black H.I.P.S. Plastic 
Grille Color:    Black 
Input Connectors:    5-way binding posts 
Dimensions (H x W x D):    406 mm x 343 mm x 224 mm
16 in x 13.5 in x 8.8 in 
Net Weight:    5.0 kg (11 lb) 

• 30 Hz - 20 kHz frequency range.
• 120W continuous program (60W cont. pink, 240W cont. peak).
• 90 dB sensitivity (1W/1m).
• High-slope crossover network produces natural sound and even coverage.
• Optional MTC-128RIF Rough-In-Frame for new construction installation to wallstuds.

This 2-way passive full range studio monitor loudspeaker which incorporates
an 8? low frequency transducer and a 0.75 inch aluminium dome high frequency
transducer. The system's low frequency driver is mounted as a direct radiator
in a bass-reflex cabinet constructed of MDF wood, with solid Iroko side panels.
The tuning port is located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure. The acoustically
transparent cloth grille system is detachable.

FEATURES:
2-way near/mid-field studio monitor
8" low frequency speaker
1" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
125 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:125 W
Program Power HandlingP:250 W
Peak Power HandlingK: >500 W
Recommended Amplifier:125 W to 250 W at 8 Ω
On-axis Frequency RangeF:38 Hz - 33 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI:3.2 Ω (at 15 kHz)
On-axis Sensitivity 1W / 1 mS: 89 dB SPL
Rated Peak SPL at Full Power: 116 dB
Nominal -6 dB BeamwidthsB:120° Horizontal
(average, 500 Hz to 8 kHz)    95° Vertical
Enclosure Material:MDF with Iroko wood side panels
Color:Black/Iroko wood
Connectors:Binding posts
Dimensions (H x W x D):42 x 28 x 29 cm(16.5 x 11 x 11.5 in)
Mounting:2 x M6 points
Weight: 12.8 kg (28 lbs)
Shipping Weight: 14 kg (31 lbs)

The Monitor 6 is a 2-way passive full range studio monitor
loudspeaker which incorporates a 6.5 inch cone low frequency
transducer and a 0.75 inch aluminium dome high frequency
transducer. The system?s low frequency driver is mounted
as a direct radiator in a bass-reflex cabinet constructed of
MDF wood, with solid Iroko side panels. The tuning port is
located at the rear to minimize turbulence noise and two M6
mounting points are located on the bottom panel of the enclosure.
The acoustically transparent cloth grille system is detachable.

FEATURES:
2-way near field studio monitor
6.5" low frequency speaker
.75" aluminum dome fluid cooled tweeter
LQS? waveguide for dispersion control
100 W power handling

SPECIFICATIONS:
RMS (Average) Power HandlingR:100 W
Program Power HandlingP: 200 W
Peak Power HandlingK: >400 W
Recommended Amplifier: 100 W to 200 W at 8 Ω
On-axis Frequency RangeF: 44 Hz - 40 kHz
Nominal Impedance: 8 Ω
Minimum ImpedanceI: 7.2 Ω (at 174 Hz)
On-axis Sensitivity 1W / 1 mS: 85 dB SPL
Rated Peak SPL at Full Power: 111 dB
Nominal -6 dB BeamwidthsB:125° Horizontal
(average, 500 Hz to 8 kHz)   106° Vertical
Enclosure Material: MDF with Iroko wood
Color: Black/Iroko wood
Connectors: Binding posts
Dimensions (H x W x D): 34 x 23 x 27 cm (13.5 x 6.5 x 10.5 in)
Mounting: 2 x M6 points
Weight: 6.9 kg (15.2 lbs)
Shipping Weight: 8.1 kg (18.8 lbs)

HX-5W 

Variable Dispersion Speaker System.
Four speaker modules ensure high power and high quality.
The changeable orientation of each of the four speaker modules
independently allows the directivity angle of the speaker system
to be adjusted. Built-in passive network ensures appropriate sound
quality. Ideal for both permanent and temporary installations,
including both vertical and horizontal positioning. Equipped
with a convenient carrying handle. Can be mounted directly on
a wall or suspended by wire, chain or shackle with no need
to use optional brackets. Optional mounting brackets allow
use in a wide variety of applications, including suspension,
ceiling mounting, wall mounting, and speaker stand mounting.
Mounting procedures are described in the instruction manuals
enclosed with the mounting bracket or stand adapter.

Specifications:
Enclosure Type Bass Reflex
Power Handling Continuous Pink Noise; 200W: Continuous Program; 600WRated 
Impedance 8ohms
Sensitivity (1 W, 1m) 96 dB (60° mode), 97 dB (45° mode),
98 dB (30° mode), 99 dB (15° mode)
Frequency Response(Deviation -10dB) 70 to 20,000 Hz (60° mode)
75 to 20,000 Hz (45° mode) 80 to 20,000 Hz (30° mode) 85 to 20,000 Hz (15° mode)
Crossover Frequency 4kHz
Directivity Angle Horizontal: 100° (over 2,000 Hz) Vertical: 60° (over 800 Hz),
45° (over 1 .2 kHz), 30° (over 1 .6 kHz), 15° (over 3.2 kHz) variable
Speaker Component Low frequency: 12 cm (5“) cone-type x 4
High frequency: Balanced dome-type x 12
Input Terminal Speakon NL4MP x 2 and M4 screw terminal
Finish (Enclosure) Polypropylene, white
Dimensions 408 (w) x 546 (h) x 342 (d) mm 16 1/16 (w) x 21 1/2 (h) x 13 15/32 (d) inches
Weight 16kg
Accesory Hanging bracket x 2, Hex. wrench x 1
Options Matching transformer:MT-200,Speaker mounting bracket:HY-PFB,
HY-CW1W,HY-WM1W,HY-WM2W,HY-CN1W, Speaker stand adapter:HY-ST1