| Content |
The Control 26-DT is a compact ceiling speaker assembly configured to install
into standard ceiling backcans designed for 200 mm (8 inch) speakers. High
power handling, wide frequency response and low distortion make the Control
26-DT ideal for sound systems requiring a higher fidelity sound, that integrates with many backcan designs.
* Transducer, Network and transformer.
* Fits standard backcans for 8-inch speakers.
* Wide coverage.
* Advanced crossover network provides even coverage throughout listening area.
* 60 Watt transformer for 70V or 100V lines.
* Coaxial 165 mm (6.5 inch) woofer with butyl rubber surround and 19 mm (¾ inch) titanium coated tweeter.
|
The TOA Electronics 5W Clean Room Ceiling Speaker is ideal applications include clean rooms, hospitals and laboratory
Rated Input5WRated Impedance100V Line: 2 kOhms (5W)
70V Line: 2 kOhms (2.5W)Sensitivity87 dB (1 W, 1 m)Frequency Response150Hz - 20kHzEnclosureCompletely sealed typeSpeaker Component8cm cone-type (vibration section: high molecular substance)Operating Temperature Range-20 deg. C to +60 deg. C / -4 deg .F to +140 deg. FChemical ResistanceResistive to formalin solvent and iodine liquid (disinfectant)FinishPanel: Allory-coated ABS resin
Enclosure: ABS resin, off-white
Punching net: Stainless steel
Exposed fixing screw: Stainless steelDimensionsDia. x D: 4.57 x 4.33" / 116 x 110mm
Fixing Holes: dia. 3.86" / 98mmWeight21.87oz / 620g
Μεγάφωνο οροφής 5W με μετ/στή 100V, κλειστού θαλάμου σχεδιασμένο για εργαστήρια ερευνών (χημικά, βιολογικά κ.λ.π.) & δωμάτια υπολογιστών. |
|
Features:
- Consistent 90° broadband pattern control.
- Components:
300 mm (12 in) woofer with Kevlar-reinforced cone with 50 mm (2 in) voice-coil.
25 mm (1 exit) compression driver. - Extraordinary clarity for speech and vocals with extended frequency response for music.
- 250 Watt power handling with high sensitivity provides high SPL capability.
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
- Clean, contemporary grille and optional backbox available.
| System: Frequency Range (-10 dB): 34 Hz – 18 kHz Frequency Response (±3 dB): 47 Hz – 16 kHz Coverage Pattern: 90° conical, broadband (Avg 1k - 16kHz) Directivity Factor (Q): 8.7 (1k - 16kHz) Directivity Index (DI): 9.4 dB (1k - 16kHz) Long-Term System 250 W (1000 W peak), 2 hrs Power Rating, IEC: 150 W (600 W peak), 100 hrs Sensitivity (2.83V@ 1m):
94 dB measured half-space
99 dB computed for competitive comparison Maximum SPL: 118 dB cont ave (124 dB peak) Crossover Network: 1.8 kHz, 3rd order (18 dB/oct) high-pass plus conjugate to HF, 2nd order low-pass to LF. Nominal Impedance (321C): 8 ohms Transformer Taps(321CT): 70V: 60W, 30W, 15W, & 7.5W 100V: 60W, 30W & 15W Transducers: Low Frequency Driver: Kevlar reinforced cone, 50 mm (2 in) voice coil. High Frequency Driver: JBL 2412H-1 compression driver, 25 mm (1 in) voice coil. Physical: Input Connector (321C): Removable locking connector with screw-down terminals. Max wire 12 AWG (2.5 mm2) 321C:
1) + in
2) + loop out
3) – loop out
4) – in Tap Connection (321CT): 321CT:
A) Common
B) 7.5W@70V, 15W@100V
C) 15W@70V, 30W@100V
D) 30W@70V, 60W@100V
E) 60W@70V, n/c@100V Safety Agency Rating: In accordance with IEC60849 / EN60849, Transformer in CT model
UL Listed per UL1876 Baffle: Metal, 366 x 366 mm (14.4 x 14.4 in), driver pre-mounted to baffle, ported, EZRail™ for easier installation to backbox. Baffle Attachment to MTC-300BB12 Backbox: Attach via either 4 corner holes M4 x 14 mm machine screws, or 6 side/end holes #10 x 0.5 in (12 mm) sheet metal screws. Grille Attachment to Baffl e: 4 pcs 4 mm machine screws in corners. Dimensions (H x W x D): 366 x 366 mm (14.4 x 14.4 in) square baffl e x depth from back of baffl e of 223 mm (8.8 in) on 321C & 240 mm (9.5 in) on 321CT. Net Weight: 321C: 7.3 kg (16.0 lbs) 321CT: 8.2 kg (18.0 lbs) Shipping Weight: 321C: 8.8 kg (19.4 lbs) 321CT: 9.8 kg (21.6 lbs) Included Accessories: Ported baffl e pre-attached, transformer on 321CT. Optional Accessories:
MTC-300SG12 Grille, square contoured, white.
MTC-300BB12 Backbox, 80 liters (3 cubic feet)
MTC-300T150 Transformer, 150 W for use with 321C. |
|
- TOA introduces a new range of ceiling-mounted speakers that have been designed and engineered to overcome limiting factors that have been associated with conventional ceiling-mount speakers. Most noticeable has always been the high-frequency roll-off that resulted from limited speaker dispersion characteristics. TOA's new ceiling speaker range provides well-balanced audio reproduction without treble attenuation over an expanded listening area thanks to the extra-wide dispersion characteristics that are part of the overall speaker design. Perceived speaker directionality and beaming tendencies are minimized, resulting in a natural, well-balanced sound over a wide area at all levels. Conventional speakers exhibit high frequency roll-off characteristics as the distance between speaker and listener increases. However TOA believes that an ideal ceiling-mounted speaker's response characteristics should include wide dispersion and non-frequency dependent directionality and this new ceiling speaker series proves that.
- Designed to blend into ceilings with a smooth, low-profile design.
- Extra ease of use and higher cost-effectiveness with the metal "back can" enclosure for the speaker rear.
- Minimal high frequency roll-off allows clear and well-balanced sound reproduction over a wide listening area.
- Quick and easy installation to precisely mount speaker onto ceilings and walls. Rotating front grille also installs quickly and conveniently.
- The Electronic Controller (AC-120) option is required to provide increased control of the F-122C's speaker response.
| Specifications |
|
|---|
| Enclosure | n/a | | Rated Input | 6W (high impedance) | | Power Handling Capacity | Continuous pink noise: 9W(8), 6W (16) | | Continuous program | 18W (8), 12W(16) | | Impedance | (100V Line) 1.7kΩ (6W), 3.3kΩ (3W), 10kΩ (1W), 20kΩ (0.5W) | | Impedance | (70V Line) 830Ω (6W), 1.7kΩ (3W), 3.3kΩ (1.5W),10kΩ (0.5W), 20kΩ (0.25W) | | Impedance | (25V Line) 830Ω (0.75W), 1.7kΩ (0.4W), 3.3kΩ (0.2W),10kΩ (0.06W), 20kΩ (0.03W) | | Low (Adjustable) | 16Ω, 8Ω | | Sound Pressure Level | 89dB (1W, 1m) | | Frequency Response | 80 - 20,000Hz (-10dB), 50 - 20,000Hz (-20dB) at installation in 1/2 free sound field (measured by installing the unit in the center of a ceiling.) | | Speaker Component | High frequency: Balanced dome- type | | Speaker Component | Low frequency: 12cm cone-type | | Mounting Hole | ø200(maximum ceiling thickness: 37mm) | | Input Terminal | Push-in connector (Bridging terminal-2 branch type) | | Usable Cable | 600V Vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire; ø0.8 - ø1.6mm (equivalent to AWG No.20 - 15)
7-core twisted copper wire:0.75 - 1.25mm² (equivalent to AWG No.18 - 17) | | Finish Enclosure | n/a | | Baffle | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), black | | Rim | Fire-resistant ABS resin (resin material grade; UL-94 V-0 or its equivalent), white, paint | | Punched net | Steel plate, white, paint | | Dust-proof bag | Artificial fiber, black | | Dimensions | ø230 x 154 (D)mm | | Weight | 1.5kg (including panel) | | Accessories Panel | 1 | | Ceiling reinforcement ring | n/a | | Safety wire | n/a | | Paper pattern | 1 | | Option Anchor hanging bracket | n/a | | Back can | HY- BC1 | | Tile bar bridge | n/a | | Trim ring | n/a |
|
Integrated with a speaker unit and panel, the PC-2869 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It feature spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring.
| Rated Input | 6 W (100 V line), 3 W (70 V line) | | Rated Impedance | 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W) | | Sensitivity | 94 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise) | | Frequency Response | 40 - 20,000 Hz (peak -20 dB) | | Speaker Component | 20 cm (8“) double cone-type | | Dimensions for Fixing Hole | Mounting hole: φ250±3 mm (φ9.84“±0.12“)
Ceiling thickness: 5 - 25 mm (0.2" - 0.98“) | | Speaker Mounting Method | Spring clamp | | Applicable Cable | 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) | | Connection | Push-in connector (bridging terminal-2 branch type | | Finish | Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
paint | | Dimensions | φ280 × 92 (D) mm (φ11.02" × 3.62“) | | Weight | 1.4 kg (3.09 lb) | | Accessory | Paper pattern …1 |
|
-42 Hz to 200 Hz frequency range (-10 dB)
-140 watts continuous program power capacity
-95 dB sensitivity (1W/1m)
-8 ohms nominal impedance
-Steel back-can with removable locking connector
-Control 19CST 70V taps: 75W, 30W, 15W, 7.5W
-Control 19CST 100V taps: 75W, 30W, 15W.
-Dimensions (height x diameter): 345 mm x 345 mm (13.6 in x 13.6 in)
-Net Weights: Control 19CS = 5.5 kg (12 lb),
-Control 19CST = 6.4 kg (14 lb)
|
Reviews
There are no reviews yet.