| Content |
JBL CONTROL CONTRACTOR 40 SERIES C40CS/T-PL Direct Radiating In-Ceiling Subwoofer
The Control 40CS/T is a direct radiating, high impact, 8" subwoofer with a built-in passive crossover network enabling the Control 40CS/T to be used as part of a subwoofer-satellite system. When combined with the Control 42, the Control 40CS/T offers an extremely natural sounding and powerful subwoofer-satellite system that is perfect for applications requiring wide bandwidth and superior sonic performance with minimal visual impact. The system can also be used via an active crossover design with the rest of the Control Contractor in-ceiling line for superior bass response and can be operated off a 70V / 100V distributed line or in direct mode.
Features:
Extended Bass Response with Maximum Impact
Passive Crossover Network for Easy to Install Subwoofer-Satellite Systems
Switchable 70V/100V or Low-Z
Elegant design fits any décor
Specifications:
Component: 8" long-throw woofer
Frequency Range: 30 Hz - 280 Hz
Power Capacity: 200W program, 100W pink noise
Sensitivity: 95 dB (near corner), 89 dB (center of ceiling), 1W, 1m
Nominal Impedance: 8 ohms
70V/100V Taps: 60W, 30W, 15W (7.5W at 70V only)
Termination: Screw-down removable locking clip-in connector
Satellite Outputs: Connectors for 2 or 4 Control 42C satellite speakers
Included Accessories: C-rings, tile rails, paint shield, cutout template, grille
Dimensions (Diameter x Depth): 13.6" x 13.6“
|
The JBL Professional Control 227CT is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 227CT incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 227CT features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for enduring reliability and outstanding performance. A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 227CT enabling the system to be used on 70V or 100V distributed speaker lines.
The Control 227C and CT are easy to install and feature a removable multi-pin locking connector, with secure screw-down terminals. This allows the for pre-wiring the input wires for easy clip-on convenience during installation. The optional MTC-200BB6 14 cubic liter (0.5 cubic foot) back can is made of extra-thick 16 guage steel and the top is lined with 1/2" medium density fibreboard.
The clean, contemporary look of the MTC-RG6/8 grille for the Control 227C and CT is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
To ensure long life and reliability, Control 227C and CT pass JBLʼs 100-hour torture power test. Nobody in the industry has more demanding reliability standards.
Features
- Consistent 120° broadband pattern control for exceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5" woofer; 1" compression driver
- Extraordinary clarity for speech and vocals with extended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constant coverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille (sold separately)
Specifications
- Frequency Range (-10dB): 43Hz - 19kHz
- Frequency Response (-3dB): 75Hz - 17kHz
- Nominal Sensitivity: 90dB measured half-space; 95dB computed for competitive comparison
- Nominal Coverage Angle: 120 degrees conical, broadband
- Nominal Impedance: 8 ohms
- Low Frequency: 6.5" Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia.): 12" round baffle x depth from back of baffle of 5.8“
|
The JBL Professional Control 226C/T is a premium in-ceiling professional loudspeaker designed for applications requiring superior quality sound in ceiling-mount applications. Delivering exceptional next-generation performance in a medium format coaxial point source design, the Control 226C/T incorporates breakthrough performance features such as best-in-class pattern control to provide a consistent sound throughout the listening area. Especially wide coverage allows fewer speakers to cover the space, reducing both the material and labor cost for the installation.
The Control 226C/T features a 6.5" Kevlar-reinforced low frequency driver coupled with a 1" exit titanium compression driver for outstanding reliability and performance. The system is complete with a pre-attached back can and is designed for years of maintenance free use.
Easy to install, the Control 226C/T features JBL Professionalʼs proven C-Ring with Tile Rail suspension system. Installation can be accomplished from beneath the ceiling structure for instances when access above the ceiling tile is not possible. Additionally, the removable multi-pin locking connector, with secure screw-down terminals, allows for prewiring the input wires for easy clip-on convenience during installation.
A top quality, low saturation 60 Watt multi-tap transformer comes pre-attached on the Control 226C/T enabling the system to be used on 70V or 100V distributed speaker lines. The system can be used in either 8 ohm (low impedance) or transformer mode by selecting the desired function via the baffle mounted impedance switch.
The clean, contemporary look of the Control 226C/Tʼs grille is designed to suit a variety of settings, offering a simple, elegant appearance that fits into a wide variety of décors.
Features
- Consistent 120° broadband pattern control forexceptional coverage
- Coaxial design featuring: Kevlar-reinforced 6.5“woofer; 1" compression driver
- Extraordinary clarity for speech and vocals withextended frequency response for music
- 150 Watts Power Handling
- Advanced high-slope crossover network for constantcoverage and smooth, natural midrange
- Integrated back can with clean, contemporary grille
Specifications
- Frequency Response (-10dB): 47Hz to 19kHz
- Sensitivity: 90 dB; 95 dB computed for competitivecomparison
- Coverage Angle: 120 degrees conical, broadband
- Impedance: 8 ohms (in bypass model)
- Tap Settings: A) Common; B) 7.5W @ 70V, 15W @ 100V;C) 15 W @ 70V, 30 W @ 100V; D) 30 W @ 70V, 60 W @ 100V; E) 60 W @ 70V, n/c @100V
- Low Frequency: 6.5" woofer Kevlar reinforced cone
- High Frequency: 1" exit compression driver
- Dimensions (H x Dia): 13" round baffle x depth fromback of baffle of 9.7“
|
The JBL Control 24CT MicroPlus is a compact in-ceiling speaker, providing full, high quality sound for background music and music-plus-paging systems. Low distortion, a smooth, natural frequency response, and a 25W transformer make the Control 24CT MicroPlus ideal for medium volume business music. Low frequency output can be augmented with the addition of one of the Control Contractor subwoofer models.
NB.: Priced each (per speaker) and sold in pairs only.
- Type:Ceiling
- Power Rating:25W
- Frequency Response:80 Hz - 25 kHz
- 100 Volt Line:Yes
- Colour:White
Frequency Range (-10dB)1: 85 Hz - 25 kHz
Power Capacity - Program2: 30 W
Pink2: 15 W
Nomical Dispersion: 150º conical
Nominal Sensitivity 1 W, 1m: 86 dB
Nominal Impedance: 8 ohms (24C Micro)
Transformer Taps - 100V: 8,4,2,1 W (24CT Micro)
25,12 W (24 CT MicroPlus)
70.7 V: 8,4,2,1,.5 W (24CT Micro)
25,12,6 W (24CT MicroPlus)
Components - Low Frequency: 4 1⁄2 in (115 mm)
High Frequency: 1⁄2 in (12 mm)
Enclosure: Formed steel backcan
Dimensions: 106 x 195 mm
4.2 x 7.7 in
Net Weight: 2.5 kg (5.5 lb) |
Integrated with a speaker unit and panel, the PC-2869 Ceiling Mount Speaker is of all metallic construction and ideal for use in a voice alarm system. It feature spring clamp mechanism for easy speaker mounting to the ceiling. The input impedance can be easily changed by changing the tap position of the transformer. The push-in type input terminal block makes cable connections easy and allows bridge wiring.
| Rated Input | 6 W (100 V line), 3 W (70 V line) | | Rated Impedance | 100 V line: 1.7 kΩ (6 W), 3.3 kΩ (3 W), 6.7 kΩ (1.5 W), 13 kΩ (0.8 W)
70 V line: 1.7 kΩ (3 W), 3.3 kΩ (1.5 W), 6.7 kΩ (0.8 W), 13 kΩ (0.4 W) | | Sensitivity | 94 dB (1 W, 1 m) (500 - 5,000 Hz, pink noise) | | Frequency Response | 40 - 20,000 Hz (peak -20 dB) | | Speaker Component | 20 cm (8“) double cone-type | | Dimensions for Fixing Hole | Mounting hole: φ250±3 mm (φ9.84“±0.12“)
Ceiling thickness: 5 - 25 mm (0.2" - 0.98“) | | Speaker Mounting Method | Spring clamp | | Applicable Cable | 600 V vinyl-insulated cable (IV wire or HIV wire)
Solid copper wire: φ0.8 - φ1.6 mm (equivalent to AWG 20 - 14)
7-core twisted copper wire: 0.75 - 1.25 m㎡ (equivalent to AWG 18 - 16) | | Connection | Push-in connector (bridging terminal-2 branch type | | Finish | Baffle: Steel plate, off-white (RAL 9010 or equivalent color), paint
Grille: Surface-treated steel plate net, off-white (RAL 9010 or equivalent color),
paint | | Dimensions | φ280 × 92 (D) mm (φ11.02" × 3.62“) | | Weight | 1.4 kg (3.09 lb) | | Accessory | Paper pattern …1 |
|
Features:
Consistent 90° broadband pattern control. Kevlar-reinforced 300 mm (12 in) woofer with 75 mm (3 inch) voice-coil cone. Medium-format compression driver. Extraordinary clarity for speech and vocals with extended frequency response for music. Power handling of 400 Watts with high sensitivity provides high SPL capability. Advanced high-slope crossover network for constant coverage and smooth, natural midrange.
Specifications:
Frequency Response 48 Hz - 19 kHz, +/-3dB (in ceiling) Maximum Power Handling 1600 Watts, 2 hrs., pink noise 1000 Watts, 100 hrs. Impedance 8 Ohms SPL 121dB avg., 124dB peak Beamwidth 90° conical, broadband (1kHz - 10kHz) Horizontal Beamwidth 90° conical, broadband (1kHz - 10kHz) Vertical Beamwidth 90° conical, broadband (1kHz - 10kHz) Directivity Factor: 9.0 (1kHz - 16kHz) Index: 9.5dB (1kHz - 16kHz) Construction Kevlar-reinforced cone woofer Medium-Format compression driver with radial slot phase plug Ported Metal Baffle Magnet LF: Saturated-gap geometry HF: Neodymium Voice Coil LF: 3" HF: 1.5" Dimensions (HxWxD) 14.4 x 14.4 x 8.8" (366 x 366 x 223mm) Weight 20 lb (9.1 kg)
|
Reviews
There are no reviews yet.