KRAMER PT-101R 1:1 RF Line Amplifier

INPUT:    1 RF/75Ω, on an "F” type connector.
OUTPUT:    1 RF/75Ω, on an "F” type connector.
BANDWIDTH (-3dB):    40-3000MHz.
COUPLING:    AC.
RF GAIN:    + 20dB typical across band.
NOISE FIGURE:    3.5dB.
POWER SOURCE:    12V DC, 78.8mA.
DIMENSIONS:    6cm x 6.5cm x 2.5cm (2.36” x 2.56” 1”) W, D, H.
WEIGHT:    0.1kg (0.22 lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-4PT 19" rack adapter.

Input     Twisted Pair Signal, balanced @ 150 ohms, RJ-11 Standard Telephone Connector
Output     Composite Video, 1 Vpp @ 75 ohms, on a BNC connector
Unbalanced Audio, 1 Vpp @ 33K ohms, mic or line level, on an RCA connector
Video Bandwidth     58 MHz
Video Signal-to-Noise Ratio     72 dB
Differential Phase     0.03°
Differential Gain     0.41%
Video Controls     Power On/Off
Internal Gain and HF
Mic or Line Level
Dimensions (WxDxH)     4.7 x 2.95 x 0.98“
12 x 7.5 x 2.5cm
Weight     0.62 lbs
0.28 kg
Power Source     12 VDC on an AC Power Adapter

Input    Composite video, 1Vpp/75? on a BNC connector.
Output    Optic Fiber ST connector.
Operation Distance    Up to 5km (MultiMode).
Video Bandwidth (-3Db)    55 MHz. 20 MHz.
Diff. Gain    0.4%.
Video S/N Ratio    60 dB.
Non-Linearity    0.6%
Power Source    12 VDC 80mA.
Dimensions     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
Weight     0.27 kg. (0.59 lbs.) approx.
Accessories    Power supply, mounting bracket.
Options    RK-T1, RK-T3, 19” rack adapters.

INPUT:    1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUTS:    2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors; 2 composite video, 1Vpp/75Ω on BNC connectors.
MAX. OUTPUT LEVEL:    1.4Vpp.
VIDEO BANDWIDTH (-3dB):    160MHz (Y).
NON-LINEARITY:    0.05%.
DIFF. GAIN:    0.08%.
DIFF. PHASE:    0.08Deg.
K-FACTOR:    0.1%.
VIDEO S/N RATIO:    Better than 80dB (Y channel).
POWER SOURCE:    12V DC, 60mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.28kg (0.62lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19” rack adapter.

Input    1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs    4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution     8 or 10-bits, automatic.
Operation Standards    143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking    Automatic up to 30dB of cable loss.
Display    Power ON LED.
Dimensions (w,d,h)    12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight     0.3kg. (0.67 lbs.) approx.
Power Source    12VDC, 250 mA.
Options    RK-T1, RK-T3 rack adapters.

NPUT:    4 video, 1Vpp/75Ω on BNC connectors.
OUTPUT:    4 video, 1Vpp/75Ω on BNC connectors.
BANDWIDTH (-3dB):    20MHz.
VIDEO S/N RATIO:    69dB.
POWER SOURCE:    230V AC, 50/60Hz, (115V AC, USA).
DIMENSIONS:    19 " x 7 " x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.