KRAMER VA-12 Composite Video & Stereo Audio Separator

Input    1 mixed video-audio signal 1Vpp/75? on a BNC type connector.
Outputs    1 composite video, 1Vpp/75? on a BNC type connector.1 audio stereo (L, R), 1Vpp/100? on RCA connectors.
Bandwidth (-3Db)    7 MHz.
Diff. Gain    0.4 %.
Diff. Phase    0.17 Deg.
Video S/N Ratio    72 dB.
Power Source    230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.4 VA.
Dimensions     16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”, W, D, H.).
Weight     0.78 kg. (1.7 lbs.) approx.
Accessories    Power cord.
Options    RK-50RN rack adapter holds two units in two vertical rack spaces.

INPUT:    1 RF, 0.5Vpp/75Ω (max.) on an "F” type connector.
OUTPUTS:    4 RF, 0.5Vpp/75Ω (max.) on "F” type connectors.
BANDWIDTH:    40MHz to 3000MHz (+/-3dB).
COUPLING:    AC.
RF GAIN:    +6dB typical across band.
NOISE FIGURE:    3.5dB.
POWER SOURCE:    12V DC, 80mA.
DIMENSIONS:    12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”) W, D, H.
WEIGHT:    0.32kg (0.71lbs) approx.
ACCESSORIES:    Power supply, mounting bracket.
OPTIONS:    RK-3T 19" rack adapter.

Input    Composite video, 1Vpp/75? on a BNC connector.
Output    Optic Fiber ST connector.
Operation Distance    Up to 5km (MultiMode).
Video Bandwidth (-3Db)    55 MHz. 20 MHz.
Diff. Gain    0.4%.
Video S/N Ratio    60 dB.
Non-Linearity    0.6%
Power Source    12 VDC 80mA.
Dimensions     12cm x 7.5cm x 2.5cm (4.7” x 2.95” x 0.98”, W, D, H.)
Weight     0.27 kg. (0.59 lbs.) approx.
Accessories    Power supply, mounting bracket.
Options    RK-T1, RK-T3, 19” rack adapters.

NPUT:    1 composite video 1Vpp/75Ω on a BNC connector;1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3Vpp/75Ω on a 4-pin connector.
OUTPUTS:    1 composite video 1Vpp/75Ω on a BNC connector; 1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector.
MAX. VIDEO OUTPUT:    2.5Vpp/75Ω.
VIDEO BANDWIDTH (-3dB):    10MHz (YC to CV).
DIFF. PHASE:    0.3Deg.
DIFF. GAIN:    0.36%.
K-FACTOR:    0.05% (YC to CV).
LUMA S/N RATIO:    79dB.
POWER SOURCE:    12V DC, 110mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.6kg (1.3lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.

INPUTS:    8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS:    8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION:    10-bit or 8-bit, automatic according to input resolution.
SWITCHING:    During vertical interval from analog sync.
STANDARDS:    4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION:    Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS:    22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY:    Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE:    Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS:    19" x 7" x 1U W, D, H, rack mountable.
WEIGHT:    3.5kg (7.8lbs) approx.
ACCESSORIES:    Power cord.

INPUT:    1 composite video 1Vpp/75Ω on a BNC connector. 1 s-Video: Luma: 1Vpp/75Ω, Chroma: 0.3 Vpp/75Ω on a 4-pin connector.
Outputs:    1 s-Video: Luma: 1Vpp/75Ω; Chroma: 0.3Vpp/75Ω on a 4-pin connector; 1 composite video 1 Vpp/75Ω on a BNC connector.
VIDEO BANDWIDTH (-3dB):    100 MHz. (YC to CV), 5.8 MHz. (CV to YC, PAL).
DIFF GAIN:    0.7% (YC to CV,NTSC).
DIFF. PHASE:    0.15 Deg. (YC to CV, NTSC).
K-FACTOR:    0.05% (YC to CV), 0.5% (CV to YC, NTSC).
LUMA S/N RATIO:    72 dB in both direction, (PAL).
CONTROL:    Two electronic touch switches to select PAL or NTSC operation.
POWER SOURCE:    12V DC, 200mA.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT:    0.64kg (1.4lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19” rack adapter.