Content |
Input 1 mixed video-audio signal 1Vpp/75? on a BNC type connector.
Outputs 1 composite video, 1Vpp/75? on a BNC type connector.1 audio stereo (L, R), 1Vpp/100? on RCA connectors.
Bandwidth (-3Db) 7 MHz.
Diff. Gain 0.4 %.
Diff. Phase 0.17 Deg.
Video S/N Ratio 72 dB.
Power Source 230 VAC, 50/60 Hz (115VAC, U.S.A.) 4.4 VA.
Dimensions 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”, W, D, H.).
Weight 0.78 kg. (1.7 lbs.) approx.
Accessories Power cord.
Options RK-50RN rack adapter holds two units in two vertical rack spaces.
|
INPUT: 2 composite video, 1Vpp/75Ω on BNC connectors.
OUTPUT: 2 composite video, 1Vpp/75Ω on BNC connectors.
BANDWIDTH (-3dB): 20MHz.
S/N RATIO: 69dB.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS: 22cm x 18cm x 4.5cm (8.7” x 7” x 1.7”) W, D, H.
WEIGHT: 1.3kg (2.9lbs) approx.
ACCESSORIES: Power cord.
OPTIONS: RK-1 19” rack adapter.
|
INPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
OUTPUT: 1 composite video, 1Vpp/75Ω on a BNC connector.
S/N RATIO: 69dB.
BANDWIDTH(-3dB): 20MHz.
POWER SOURCE: 230V AC, 50/60Hz, (115V AC, USA) 2.3VA.
DIMENSIONS: 16.5cm x 12cm x 4.5cm (6.5” x 4.7” x 1.8”) W, D, H.
WEIGHT: 0.72kg (1.6lbs) approx.
ACCESSORIES: Power cord.
OPTIONS: RK-1 19” rack adapter.
|
INPUTS: 8 SMPTE 259M serial video, 75Ω, on BNC connectors; looping analog sync inputs on BNC connectors.
OUTPUTS: 8 reclocked SMPTE 259M outputs, 75Ω, on BNC connectors.
RESOLUTION: 10-bit or 8-bit, automatic according to input resolution.
SWITCHING: During vertical interval from analog sync.
STANDARDS: 4fsc PAL, 4fsc NTSC, 4:2:2 (525/625), and 360Mbps widescreen (525/625).
EQUALIZATION: Automatic for up to 300m for 270Mbps using Belden 8281 cable.
CONTROLS: 22 front panel buttons, RS-232 and RS-485 control interface.
DISPLAY: Current switcher status on eight 7-segment LEDs. Signal presence for each channel on front panel LEDs.
POWER SOURCE: Universal, 85-264V AC, 47-440Hz, 25VA max.
DIMENSIONS: 19" x 7" x 1U W, D, H, rack mountable.
WEIGHT: 3.5kg (7.8lbs) approx.
ACCESSORIES: Power cord.
|
INPUT: 1 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on a 4-pin connector.
OUTPUT: 2 s-Video, 1Vpp/75Ω (Y), 0.3Vpp/75Ω (C) on 4-pin connectors.
MAX. VIDEO OUTPUT: 2Vpp.
VIDEO BANDWIDTH (-3dB): 150MHz (Y).
DIFF. GAIN: 0.03%.
DIFF. PHASE: 0.03Deg.
K-FACTOR: |
Input 1 SMPTE-259M serial video, 75 Ohm on a BNC connector.
Outputs 4 reclocked SMPTE-259M serial video, 75 Ohm on BNC connectors.
Resolution 8 or 10-bits, automatic.
Operation Standards 143Mbps (4fsc NTSC),177Mbps (4fsc PAL) 270Mbps (4:2:2 component),.360Mbps (4:2:2 Widescreen).
Equalization And Reclocking Automatic up to 30dB of cable loss.
Display Power ON LED.
Dimensions (w,d,h) 12 x 7.5 x 2.5 (cm) 4.7” x 2.95” x 0.98” (W, D, H.).
Weight 0.3kg. (0.67 lbs.) approx.
Power Source 12VDC, 250 mA.
Options RK-T1, RK-T3 rack adapters.
|
Reviews
There are no reviews yet.