L-ACOUSTICS LA2Xi Amplifier 4x640W/4ohm Controller for Install

Original price was: €5,500.00.Current price is: €5,406.39. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Architecture Single-ended (SE) mode: 4 x 4 Bridge (BTL and PBTL) modes: 4 x 3, 4 x 2 or 4 x 1 Output Power 4 x 640 W at 4 ohms (SE) 4 x 360 W at 8 ohms (SE) 2 x 1260 W at 8 ohms (BTL) 1 x 2550 W at 4 ohms […]

 

Read more

Architecture Single-ended (SE) mode: 4 x 4
Bridge (BTL and PBTL) modes: 4 x 3, 4 x 2 or 4 x 1
Output Power 4 x 640 W at 4 ohms (SE)
4 x 360 W at 8 ohms (SE)
2 x 1260 W at 8 ohms (BTL)
1 x 2550 W at 4 ohms (PBTL)
Power supply Universal SMPS with PFC
Inputs Milan-AVB, AES/EBU, Analog
Network Milan-certified with seamless network redundancy
Weight 10 kg

Reviews

There are no reviews yet.

Be the first to review “L-ACOUSTICS LA2Xi Amplifier 4x640W/4ohm Controller for Install”

Your email address will not be published. Required fields are marked *

Quick Comparison

L-ACOUSTICS LA2Xi Amplifier 4x640W/4ohm Controller for Install removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeELECTRO VOICE CPS4.10 4-channel Class-D amplifier slot f. optional RCM810 remote module 4 x 1000 W removeRAM AUDIO T-1204 Power Amplifier 4x320 Watts removeRAM AUDIO T-604 Power Amplifier 4x160 Watts remove
NameL-ACOUSTICS LA2Xi Amplifier 4x640W/4ohm Controller for Install removeLD Systems LDDP4950 DEEP² Power Amplifier 4 x 810W 4 Ohm removeRAM AUDIO S-4004 Power Amplifier 4x980 Watts removeELECTRO VOICE CPS4.10 4-channel Class-D amplifier slot f. optional RCM810 remote module 4 x 1000 W removeRAM AUDIO T-1204 Power Amplifier 4x320 Watts removeRAM AUDIO T-604 Power Amplifier 4x160 Watts remove
ImageL-ACOUSTICS LA2Xi Amplifier 4x640W
SKUE015396LDDP4950S-4004CPS 4.10T-1204T-604
Rating
Price Original price was: €5,500.00.Current price is: €5,406.39. incl. GR VAT Original price was: €892.79.Current price is: €803.51. incl. GR VAT Original price was: €2,343.59.Current price is: €1,920.75. incl. GR VAT2,740.09 incl. GR VAT Original price was: €1,339.20.Current price is: €1,071.35. incl. GR VAT Original price was: €1,016.79.Current price is: €941.89. incl. GR VAT
Stock

Available on backorder

Only 3 left in stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderOnly 3 left in stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content
Architecture Single-ended (SE) mode: 4 x 4 Bridge (BTL and PBTL) modes: 4 x 3, 4 x 2 or 4 x 1
Output Power 4 x 640 W at 4 ohms (SE) 4 x 360 W at 8 ohms (SE) 2 x 1260 W at 8 ohms (BTL) 1 x 2550 W at 4 ohms (PBTL)
Power supply Universal SMPS with PFC
Inputs Milan-AVB, AES/EBU, Analog
Network Milan-certified with seamless network redundancy
The new DEEP2 amp series features four class-H power amplifiers with toroidal core offering amplifying levels from 2 x 400 W till 2 x 810 W at 4 Ohm. During the development of this series we attached a great importance to the reliability and the durability of the amps in continuous operation, this is why we used exclusively high end and selected components for the construction of these products. The DEEP2 series features a Clip Limiter as well as every common protection circuit. On the rear panel you will find all the common In- and Outputs. The DEEP2 series will convince every user thanks to a dynamic and very clear sound which is perfectly adapted for Subbass applications as well as for multifunctional speakers. All models are lightweight and feature a robust steel plate housing and a very user friendly and compact design. The DEEP2 series will prove to be a profitable and reliable choice for bands, renting companies and professional users thanks to its excellent price/performance ratio.
Product type
Power Amplifiers

Type
PA Power Amplifiers

Rated ouput power (1kHz @ 4 Ohms)
4 x 810 W

Rated ouput power (1kHz @ 8 Ohms)
4 x 490 W

Rated ouput power (1kHz @ 8 Ohms, bridged)
2 x 1600 W

Output circuitry
Class H

Frequency response
20 - 20000 Hz

Total Harmonic Distortion (THD)
< 0.1 %

Signal-to-noise ratio
105 dB

Damping factor
> 400

Crosstalk
>70 dB

Gain
38 dB

Input sensitivity
0.775 V

Protection circuits
DC protection , short circuit , thermal overload

Controls
4 x volume , bridge/stereo mode selector , ground lift , mains switch (on/off)

Indicators
Limit , Power , Protect (protection circuit engaged) , Signal

Loudspeaker outputs
4

Speaker output connections
Speakon compatible

Cooling
highly efficient, automatic

Operating voltage
transformer

Operating voltage
230 V AC / 50-60 Hz

Weight
19,6 kg
 
  The S Series of RAM Audio amplifiers distils all these features to fulfill all your needs, whether youʼre starting a P.A. amplifier project from scratch, or you need to upgrade your present sound reinforcement equipment. In the S Series amps, you'll find five 2-channel models and five 4-channel models, all offering plentiful power levels at low distortion in the range of 1.5 to 6 kilowatts, yet weighing in around 8 kilos and 30 cm deep. • Ultra-compact and lightweight 2-U high • Laser cut aluminum front panels with integrated carrying handles • Neutrik® XLR input connectors, input and signal link in 2 channel models • Input Link switch: allow daisy-chaining of the input signal • Neutrik® Speakon® output connectors • Detented sealed potentiometers for easy recall of volume settings • ICL™, PMS™, Hi-temp, Signal indicators per channel • Power on and Stand-by leds • Highly versatile with multiple configuration and additional module options • Full PC control via EtheRAM (with EtheRAM Control module) • Switchable ICL™ clip-limiters per channel • Switchable (30-50 Hz) sub-sonic highpass filter per channel • Three-position gain selector (26, 32 or 38 dB) • Dual or bridge mode selector • Twin temperature controlled, back to front cooling fans • Oversized power components (high SOA reserve specification) Standard Signal Inputs Module: The S Series amps are equipped as standard with twin Neutrik® XLR, doubled by two other XLR connectors for linking purposes. In the 4 Channel models an XLR input per channel is provided with the signal linking facility. Analog Processor Module: permits a very easy, user-friendly signal processing to enable the amp to set up a bi-amp system without any other outboard device. These are the Processor's main characteristics: • 2-way stereo crossover (dual mono or single bridged sub output) • 24dB/oct Linkwitz-Riley configurable crossover (90, 100 o 120Hz) • Adjustable attenuation in the High-pass outputs (-3, -6 or -9dB) • Adjustable Limiter, relative to Max. Output (-3, -6 or -9dB) DSP44_S Module: Digital Signal Processor fully programmable through an USB port. These are the Processor's main characteristics: • 4 Inputs/4 Outputs or 2 In/2 Out free route configurable. • 24 bits/192 kHz 256x Oversampling Converters. • Output Delay: 0 to 7.1 meters (20.69ms) per channel. • XOver: Up to 48dB/oct Butterworth, Linkwitz-Riley and Bessel. • EQ: 9 filters per channel (Parametric, Shelving, LP,HP,BP,SB). • Gain, Mute and Phase inversion per channel. • RMS Power and Peak Voltage output limiter per channel. • Real Time operation from USB or front panel configuration. Standard Signal Inputs Module EtheRAM Control Module Ethernet Audio Transport (Coming soon) Analog Processor Module DSP44_S Module EtheRAM Control Module AES/EBU Digital Input (Coming soon)
OUTPUT POWER S-1500 S-2000 S-3000 S-4000 S-6000 S-3004 S-4004 S-4044 S-6004 S-6044
1kHz, 1.0% THD
2 ohms 2x880W 2x1190W 2x1570W 2x1950W 2x2950W 4x700W 4x980W - 4x1440W -
4 ohms 2x575W 2x790W 2x1100W 2x1380W 2x2025W 4x500W 4x670W 4x975W 4x1000W 4x1480W
8 ohms 2x325W 2x460W 2x630W 2x810W 2x1250W 4x300W 4x430W 4x690W 4x620W 4x1015W
Bridge @ 4ohms 1760W 2380W 3140W 3900W 5900W 2x1400W 2x1960W - 2x2880W -
Bridge @ 8ohms 1150W 1580W 2200W 2760W 4050W 2x1000W 2x1340W 2x1950W 2x2000W 2x2960W
P. N. 12dB C.F.
2 ohms 2x975W 2x1360W 2x2060W 2x2460W 2x4225W 4x890W 4x1170W - 4x2080W -
4 ohms 2x610W 2x880W 2x1240W 2x1600W 2x2600W 4x580W 4x820W 4x1230W 4x1280W 4x2110W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >75dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: 1500:2.6/1.3/0.6V 2000:3.0/1.5/0.8V 3000:3.6/1.8/0.9V 4000:4.0/2.0/1.0V 6000:5.0/2.5/1.3V 3004:2.6/1.3/0.6V 4004:3.0/1.5/0.8V 4044:3.7/1.9/0.9V 6004:3.5/1.8/0.9V 6044:5.0/2.5/1.3V Signal to noise ratio: 1500:112dB 2000:113dB 3000:115dB 4000:116dB 6000:118dB 3004:112dB 4004:113dB 4044:116dB 6004:116dB 6044:118dB Required AC Mains (@4ohms 1/8 r.p.): 1500:4A 2000:4.8A 3000:6.2A 4000:7.5A 6000:10.5A 3004:6A 4004:7.5A 4044:11A 6004:10.5A 6044:15A Dimensions (WxHxD): 483x88.9x310 mm - 19x3.5x12.2 inches Weight (Net): 1500/2000: 8Kg - 17.6Lbs 3000/4000/3004/4004/4044: 8.5Kg-18.7Lbs 6000/6004/6044: 8.6Kg-18.9Lbs Protections: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply,ICL™, PMS™, SSP™

Amplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V)
Analog Inputs 4, electronically balanced, Phoenix-type
Audio Network No
CAN Bus Interface Yes (With Optional RCM-810 Card)
Continuous Rated Power
(1 kHz, THD 1%) 100v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 2Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 4Ω 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 70v 1000 Watts
Continuous Rated Power
(1 kHz, THD 1%) 8Ω 500 Watts
Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Continuous Rated Power
(20-20 kHz, THD Cooling Front-to-Rear, continuously variable fans
DIM 30 0.02 %
Electronics Type Amplifier
Frequency Response 15 Hz-30 kHz
Input Impedance (Balanced) 20 kΩ
Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V
Intermodulation Distortion (SMPTE) 0.05 %
Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz
Network Control (IRIS-Net) Optional
Total Harmonic Distortion 0.05 %
Variable Load Drive (VLD) Yes
Height 2RU 88.1 mm (3.47“)
Width 483 mm (19.02“)
Depth 421.5 mm (16.59“)
Weight Net 11.1 kg (24.47 lbs)

aposirsi_electrovoice

 
• Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power device attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis    
OUTPUT POWER T-604 T-1204 T-1208 T-2408
RMS, 1kHz, 1.0% THD+N
4 ohms 4x 160 W 4x 320 W 8x 150 W 8x 300 W
8 ohms 4x 115 W 4x 220 W 8x 100 W 8x 195 W
Bridge @ 8ohms 2x 320 W 2x 640 W 4x 300 W 4x 600 W
Pink Noise 12dB CF
4 ohms 4x 210 W 4x 415 W 8x 180 W 8x 370 W
Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™
 

PA Power Amplifier 4 x 160 W 4 Ohms

Multichannel Power with Minimum FootprintThe T Series multichannel power amplifiers have been designed especially for installation and networked audio systems. T Series amplifiers* are available with 4 and 8 discrete channels and output ratings from 160 to 320 Watts per channel providing optimum solutions for multizoning. They feature Euroblock inputs, terminal strip outputs and a rugged 2U rackmountable chassis with 4 mm front panel. *Also available as GPIO versions with remote and emergency paging switchin Main Features
  • 8 and 4-channel models with 300 and 150 Watts (RMS) output power per channel
  • compact 2U rackmountable chassis, 220 mm deep, weight 6 kg only
  • GPIO versions for remote and emergency paging switching
  • FCM system
  • oversized heat dissipation system for maximum thermal stability
  • low THD and high S/N ratio
  • all channels bridgeable in pairs
  • switchable input gain (26, 32 and 38 dB)
  • subsonic filters for each channel (35 Hz)
  • intelligent, quiet fan cooling system
  • terminal strip loudspeaker connectors
  • PCBs with surface-mount technology (SMT) for increased reliability
  • balanced inputs with superior noise rejection
  • select high-quality components only
  • ICL intelligent clip limiters for each channel
  • recessed volume controls (optional SC-T perspex guard)
  • high-efficiency two-stage Class H design
  • protection, signal, clip, power on and standby LED indicators for each channel
  • compact QuantaPulse power supply
  • multi-voltage: automatic voltage converter for worldwide use, no switching required
  • protections: soft start, turn on/turn off muting, thermal overload, DC, RF, short circuit, open circuit, load mismatch and power supply overload
ICL™: improved Intelligent Clip Limiting prevents loudspeaker damage while maintaining audio quality and punch under clipping conditions. FCM™: the Faulty Channel Management system prevents overall amplifier shutdown. GPIO:General-Purpose-I/O-Port QuantaPulse™ Technology: The Soft Switching Resonant QuantaPulse Power Supply is designed to provide plenty of power when needed monitoring the necessary parameters of voltage and current for a controlled performance at all times. Bi-directional data flow between the power supply and power amp module. Two very important characteristics of the QuantaPulse power supply are the optimization against over-voltages and superior reliability.
  • Eight and four channel models with 300W and 150W per channel • Minimal footprint and mass arround 200mm depth and 6 Kg • Optional Add-on card to interface with third party alarm systems with GPIO connections • FCM™ Faulty Channel Management system to avoid entire device shutdown • State-of-the-art layout for maximum performance and reliability • Highly oversized thermal dissipation design for maximum reliability • Superb distortion and noise figures • All channels bridgeable by pairs • Selectable gain in four channel groups (26, 32 and 38dB) • Subsonic filter per channel (35Hz user selectable) • Temperature and signal dependant, intelligent cooling system for minimal noise • Optimal heat extraction due to the air tunneled enclosure and insulator-less power devices attachment to the heatsink • Direct connector-less output for maximum quality loudspeaker control • High grade engineering inside with the latest SMD technology • Balanced Inputs with 0.1% tolerance resistors for a precise noise rejection • Critical electronic and mechanical parts selection • Innovative protection systems, FCM™ Faulty Channel Management and SSP™ SOA Sentry Protection • Detented and optionally tamper-proof volume potentiometers • Hi efficiency, two steps Class H Audio topology • Protection, Signal and Clip indicators per channel • Power On and Standby general indicators • Extremely compact, fully featured QuantaPulse Power supply • Low current consumption and heat generation allowing less demanding conditions for multiple amplifier installations • Factory preset worldwide mains voltage power supply • Laser cut four milimeters aluminium front panel • Rugged 2U steel chasis Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz Phase Response (@1W 20Hz-20kHz): ±15deg Total Harmonic Distortion (20Hz-20kHz): Intermodulation Distortion (SMPTE): Crosstalk (20Hz-20kHz): >70dB Voltage Gain (selectable): 26/32/38 dB Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™
Weight10 kg19.60 kg8.50 kg11.10 kg5.40 kg5.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10 kg
Weight 19.60 kg
Weight 8.50 kg
Weight 11.10 kg
Weight 5.40 kg
Weight 5.40 kg