LA AUDIO EQ-231G ANALOG 2X31 BAND GRAPHIC EQUALISER

The EQ231G is a dual 31 band 1/3 Octave Graphic Equaliser in a robust 3U high case.
The band pass filters are based around precision minimum phase active RC networks
to deliver superior dynamic range and signal to noise performance. Long throw faders
provide maximum sensitivity and control of 12dB cut and boost at 31 ISO centre frequencies
from 20Hz to 20KHz.
The new and improved EQ231G now incorporates a 24dB/octave, Butterworth type, High
Pass Filter variable from 16 to 160Hz with bypass. All switches have LED indicators. The
EQ231G has electronically balanced inputs and outputs on XLR. An optional Transformer
Output module is available, featuring Active Distortion Cancellation circuitry that reduces to
negligible levels the LF distortion inherent in Passive Transformer designs. Power relays
ensure silent power on/off and also automatic bypassing of the unit when switched off. The
EQ231G is built in accordance with Electro-Magnetic Compatibility (EMC) and Low Voltage
Directive (LVD) regulations encompassed within the European 'CE' mark. This guarantees
problem free integration into audio systems.
 
Main Features
Low noise, minimum phase active RC networks
Long throw faders for maximum control
Relay based ?soft? power up and automatic power fail bypassing
Input level control with Peak LED
Channel bypass switches with LED
Electronically balanced inputs and outputs with Transformer output option
Unique Transformer Distortion Cancellation circuitry
Inductor option for improved noise and phase response on high frequencies
 
Specifications
Frequency Response 20 Hz to 20 kHz +0, -1dB
Signal to Noise Ratio +4dBu output -96dB
Input impedance 20 kW balanced
Output impedance 100W balanced
Output Load Impedance 600W to infinity
Maximum Output Level 600W Load, 1 kHz +20dBu
Total Harmonic Distortion (THD)
1 kHz, +4dBu Output, 600 Ohms Load 0.003 %
Peak indicator Threshold 2dB before clipping
Centre frequencies :
20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, 800, 1k
1k25, 1k6, 2k, 2k5, 3k15, 4k, 5k, 6k3, 8k, 10k, 12k5, 16k, 20k.
Frequency accuracy : Better than 5 % of nominal
Input Connectors XLR 3 Pin 2 High, 3 Low, 1 Ground
Output Connectors XLR 3 Pin 2 High, 3 Low, 1 Ground
Power Consumption (115/220 VAC, 50-60 Hz)
EQ231G 8 Volt-Amps
EQ231G
Weight 6.2 kg,
Shipping Weight 7.7 kg,
Dimensions 483 mm W x 230 mm D x 135 mm
Temperature Range
Operating 0C to + 50C Storage 0C to + 75C

Note : In these specifications, 0dBu is referenced to 0.775 V RMS.

INPUT

Connectors: 1/4" TRS, female XLR (pin 2 hot)

Type: Electronically balanced/unbalanced, RF filtered

Impedance: Balanced 40k ohm, unbalanced 20k ohm

Max Input Level: >+21dBu balanced or unbalanced

CMRR: >40dB, typically >55dB at 1kHz

OUTPUTS

Connectors: 1/4" TRS, male XLR (pin 2 hot)

Type: Impedance-balanaced/unbalanced, RF filtered

Impedance: Balanced 100 ohm, unbalanced 50 ohm

Max Output Level: >+21dBu balanced/unbalanced into 2k ohm or greater

>+18dBm balanced/unbalanced (into 600 ohm)

SYSTEM PERFORMANCE

Bandwidth: 20Hz to 20kHz, +0.5/-1dB

Frequency Response: 50kHz, +0.5/-3dB

Dynamic Range: Typically >112dB

Signal-to-Noise: Typically >95dB

THD+Noise:

• Professional 31-band stereo graphic equalizer for live and studio applications
• Revolutionary FBQ Feedback Detection system instantly reveals critical frequencies and can also be used as audio analyzer
• Ultra-low noise 4580 operational amplifiers for highest signal integrity
• Dedicated mono subwoofer output with adjustable crossover frequency
• Additional sweepable high and low-cut filters for each channel remove unwanted frequencies, e.g. floor rumble, hiss etc.
• Highly accurate 12-segment LED input/output metering and input gain controls for easy level setting

• Relay-controlled hard-bypass with an auto-bypass function during power failure (fail-safe relay)
• Servo-balanced inputs and outputs with 1/4" TRS and gold-plated XLR connectors
• “Planet Earth" switching power supply for maximum flexibility (100 - 240 V~), noise-free audio, superior transient response plus low power consumption for energy saving
• 3-Year Warranty Program*
• Conceived and designed by BEHRINGER Germany

DBX 2215 Dual 15-Band Graphic Equalizer with Noise Reduction

 It's amazing. One little button. So much effect. dbx? Type III? Noise Reduction is an entirely new concept... virtually instantaneous encode/decode within the circuitry of the box. We started out to build the finest EQs possible, boxes with the heritage and performance to rival our famous 30 Series EQs. And to no one's surprise they came out awfully darn good. (Ask to see the Audio Precision plots compared to the competition.) But then, Roger (our chief engineer, a nice guy, as far as engineers go) got the crazy idea of putting this new noise reduction stuff in the box. We listened to it and were amazed. The EQs sounded great without it but with it the performance was nothing short of incredible. Check it out yourself and see.

But hey, Roger wasn't about to stop there. PeakPlus? Limiter. Who knows more about limiting than the folks at dbx; nobody... that's who. So when the guys were developing this new series of EQs they wanted something that would be unique to these EQs. That's when Roger got another one of his bright ideas and said "I bet they'll work a lot better if there's a cool limiter built in." Next thing you know, all the guys are in the studio amazed at the new limiter Roger had designed specially for the 20 Series. Once again, hearing is believing... With a threshold range of 0dbu to plus 20dbu, the patent-pending PeakPlus limiter is designed to tame your program material from the subtlest nuances to the rowdiest hits. Also, the four stage LED ladder gives you a great visual indication as to what the limiter is doing.

20 Series EQs. You used to have to settle for second best in a reasonably priced EQ but not any more. With the new 20 Series from dbx Professional Products you get a great EQ circuit, a graceful yet powerful limiter and the revolutionary new design of the Type III Noise Reduction. Check out the dbx 20 Series graphic EQs at your pro audio outfitter. You'll see, with the 20 Series EQs you get MORE!!!

SPECIFICATIONS:

The class-A circuit used in the EQ-73 is similar to the eq section in the classical 1073 module, without the high pass filter. Additional frequencies have been added and the mid frequency band uses two inductors, the higher value of the second one is used for the two lowest frequencies, 160 Hz and 240 Hz, to achieve a suitable response.

The sound character is warm, punchy, sweet and musical. These classic characteristics have been heard on countless recordings through the years and it is a versatile sound that works very well on most sound sources and in most genres. The essence of this sound is now available at a surprisingly low cost, making it available to nearly everyone.

The EQ-73 has stepped frequency controls that offers a wide selection of frequencies from 20 Hz to 24 kHz.

The Low and High frequency bands are shelving and the mid frequency band is of the bell type.

The control range is +/-15 dB for the two lower bands and +/- 18dB for the high frequency band.

There are separate bypass switches for all three bands.

The EQ-73 is made to be used together with one of our PRE-73 models that has an Insert jack. It can also be used with many other units that has a low level insert jack.

Combining a PRE-73 and an EQ-73, and using a UNITE rack kit to mount them together, one will get a 19-inch 1073-style unit at a low cost and with a great sound!

FEATURES

- Vintage Style electronics. No intergrated circuits in the signal path

- 3-band with a dual inductor based mid frequency band

- Stepped frequency selection

- A wide selection of frequencies from 20 Hz to 24 kHz

- Control range up to +/- 18 dB

- Separate Bypass switches for each band

- Tantalum capacitors in the signal path

- Made to be used together with one of our PRE-73 models with an Insert jack or any other unit with a low level Insert jack

- TRS jack for in-and output connection, the nominal working level is around 18 dBu

- Selectable ground lift switch

- External power supply to avoid interaction with the audio circuits

- Great sound that suits most sound sources and genres

- A solid build quality that will last many years of normal use