| Content |
User´s manual
Configuration Guide Power Set
Configuration Matrix Audio Video Set
Configuration Matrix Entertainer Set
- 10" bass reflex construction
- Purpose-designed for CURV 500® installations
- Shallow-depth enclosure
- 200 watts RMS power handling
- 47 – 150 Hz frequency response
- Available in black or white textured paint finish
- Includes low-profile wall and ceiling mounting bracket
Purpose-designed for CURV 500® installations the iSUB is a compact, shallow-depth bass reflex subwoofer loaded with a custom 10" transducer. It features a 47 – 150 Hz frequency response for tight, dynamic low frequency reproduction with punch and definition and 200 watts RMS power handling. Finished in black or white textured paint the elegant cabinet with steel grille provides terminal block and speakON-compatible input connectors plus eight M8 suspension points. The iSUB comes with a low- profile wall and ceiling mounting bracket and a set of rubber feet.
Product type
PA subwoofer
Type
Passive
Low/mid driver dimensions
10 "
Load rating (RMS)
200 W
Frequency response
47 - 150 Hz
Impedance
3 Ohm(s)
Loudspeaker inputs
2
Speaker input connections
Speakon compatible
Cabinet material
15 mm MDF
Cabinet surface
texture paint
Cabinet colour
white
Cabinet construction
vented
Width
610 mm
Height
310 mm
Depth
230 mm
Weight
14,5 kg
| The SUB2400 is a powerful passive dual 10” subwoofer that will deliver an incredible punchy bass that makes your trousers vibrate. Together with the MASK6 or MASK8 cabinet loudspeakers and the 3 channel digital amplifier (CHAMP-3D) you get a perfect and fail-safe sound system that is suitable for bars, pubs, clubs, restaurants, taverns... where often 'dance level' music is required.
This subwoofer has two band pass chambers where each chamber is equipped with a 10” dual coil woofer. Together with the push-pull technology this results in a relative small cabinet with a huge output and very low distortion. Thanks to the small size of the woofers, less mass has to be moved. The bass reproduction is a lot more "punchy” and "faster” compared to 15” or 18” cabinets. The SUB2400 has been compared with a single 15” and 18” subwoofers and the results were astonishing in favour of the SUB2400!
SUB2400 can be driven in 4 ohms or 16 ohms mode. Selection is done by the big switch at the back of the subwoofer. Especially with long cable runs, the 16 ohms mode is advised. Less power is lost and the bass response will be a lot better. The 16 ohms mode also allows you to use multiple cabinets. |
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL.
The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
| Frequency Response (-3dB) |
50 - 160 Hz |
| Frequency Response (-10dB) |
45 - 700 Hz |
| Recommended High-Pass Frequency |
30 Hz |
| Sensitivity 1W/1m |
100 dB |
| Max. SPL / 1m (calc) |
132 dB |
| System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
| LF Transducer |
EVS18S |
| Nominal Impedance (Passive) |
8 Ohms |
| Minimum Impedance |
7.5 Ohms |
| Enclosure Material |
Plywood and MDF with EVCOAT |
| Color |
Black |
| Flying |
No |
| Input Connections |
Parallel Neutrik® NL4 |
| Internal Crossover |
Yes |
| Speaker Type |
Subs |
| Weight Net |
33.8 kg ( 74.52 lbs ) |
| Dimensions (HxWxD) |
769 x 439 x 591 mm
(30.28" x 17.28" x 23.27“) |
|
The S8028 is a compact, high-output bass reflex subwoofer for high output applications and large installations.
The system is equipped with two advanced neodymium 18” RCF precision woofers mounted in a clam-shell configuration. The two transducers couple to achieve tight and maximised output. Each 18” features massive vented neodymium magnets and 4” copper voice coil. The system is capable of producing a Max SPL of 138 dB and handles 2000 Watts AES.
| Features |
|---|
| Compact, bass reflex, 2 x 18" subwoofer system | | Very high output, response down to 35 Hz | | 138 dB max SPL, 2000 Watt AES | | Equipped with RCF high power 2 x18“, 4" voice coil neodymium woofers | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 35 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 138 dB | | | System Sensitivity: | 99 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 2000 Watt | | | Peak Power Handling: | 8000 Watt | | | Recommended Amplifier: | 4000 | | | Crossover frequencies: | Recommended 120 Hz | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 18" woofer, 4" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 900 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 580 / 22.83 mm/inch | | | Width: | 1060 / 41.73 mm/inch | | | Depth: | 700 / 27.55 mm/inch | | | Net Weight: | 64 / 141 Kg/Lbs |
|
The Control SB2210 provides low frequency reinforcement for a wide variety of sound system applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market. |
The S8018 II high-efficiency subwoofer is the ideal low-frequency extension to complement RCF installed systems.
The low-frequency transducer is a hypervented vented, high excursion RCF Precision 18” woofer with a 4” inside/outside voice coil to minimize power compression and extend the life of the product.
Using bass-reflex loading the subwoofer design ensures an efficient acoustic response down to 30 Hz. The Baltic birch plywood enclosure is painted with black, heavy duty, textured epoxy. The front is protected by a strong powder coated metal grille. The cabinet features two Neutrik Speakon™ connectors in a recessed input plate. A M20 pole mount adaptor is provided on the top of the cabinet, integrated hand carry points on the cabinet sides.
Features
- 18" high-efficiency 4" voice-coil woofer with Inside/Outside Coil Technology
- 137 dB maximum sound pressure level
- Response down to 30 Hz
- Rectangular box enclosure with protective metal grille
- 35 mm standard pole mount in top section of cabinet
- Baltic Birch cabinet painted with black, heavy duty, textured epoxy
- Integrated hand carry points
Acoustical Specifications
- Frequency Response -10 dB: 30 Hz ÷ 200 Hz
- Max SPL @ 1m: 137 dB
- System Sensitivity: 100 dB
- Nominal Impedance: 8 Ω
- Power Handling: 1500 W
- Peak Power Handling: 6000 W
- Recommended Amplifier: 3000 W
Transducers
- Woofer: 18" woofer, 4" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 1500 W AES
- Sensitivity: 100 dB
Input Section
- Input connector: Speakon NL4
Cabinet
- Cabinet Material: 15 mm birch plywood construction
- Handles: 2 on side
- Grille: Custom perforated steel grille
- Colour: Black, scratch resistant paint
Physical Specifications
- Height: 630 / 24.80 mm/inch
- Width: 530 / 20.87 mm/inch
- Depth: 770 / 30.31 mm/inch
- Net Weight: 43 / 94.60 kg/lbs
|
Reviews
There are no reviews yet.