LD Systems LDDDQSUB18 – 18″ ACTIVE PA SUBWOOFER 1400 watt with DSP EOL-DEMO

The LD Systems DDQ Sub 18 is a powerful active subwoofer with digital signal processing for demanding PA applications. It is precisely adapted for combination with the full-range speakers of the DDQ Series and is equally suitable for use with tops made by other manufacturers.

The compact bass-reflex design is loaded with an 18" FaitalPRO bass speaker that has a 4" voice coil and a neodymium magnet driven by two 700-watt Hypex Class D power amplifier modules with a highly efficient switching power supply with a total output of 1400 watts RMS. The DDQ Sub 18 attains a maximum sound-level pressure of 134 dB with a frequency response curve of 30 -120 Hz.

The Sharc DSP programmed especially for the DDQ subwoofers ensures distortion-free and reliable operation even at maximum volume levels with a 1ms look ahead limiter, frequency and phase correction, as well as all protection circuits, and has a large dynamic range of 127dB/113 dB (ADC/DAC). Seven DSP Presets permit selectable crossover frequencies between 80 and 120Hz. Eight additional presets make it possible to realize cardioid configurations of 2 or 3 subwoofers, whereby it is possible to attain rear attenuation of up to 20dB. In addition to XLR inputs and outputs, the DDQ Sub 18 has a separate mono output with a 100Hz high-pass filter. Additional features are LED function indicators and a ground lift switch; the volume and preset controls can be deactivated to prevent inadvertent adjustment.

• Type: active
• Version: DSP-controlled
• Woofer size: 18“
• Woofer size: 457.2 mm
• Woofer magnet: neodymium
• Woofer brand: Faital Pro
• Woofer voice coil: 4 "
• Woofer voice coil: 76.5 mm
• Amplifier: Class D
• Power output (RMS): 2 x 700 W
• Frequency response: 30 Hz - 120 Hz
• Max. SPL (continuous): 126 dB
• Max. SPL (peak): 134 dB
• Protection: DSP-based "look ahead" limiter, RMS speaker limiter, RMS power supply limiter, short circuit, overvoltage
• Controls: Gain dB, DSP Preset, Ground Lift, DSP/Gain enable, Power
• Indicators: DSP/ Gain disable, Peak Limit, Signal, Operate
• Line inputs: 2
• Line input connectors: XLR
• Line outputs: 3 (2x Input Link, 1x Sat Out with 100Hz high-pass)
• Line output connectors: XLR
• Power supply: switching power supply
• Operating voltage: 180-264V ~ / 47-63 Hz
• Cabinet material: 18 mm plywood
• Cabinet surface: polyurethane
• Cabinet type: bass reflex
• Width: 510 mm
• Height: 700 mm
• Depth: 725 mm
• Features: 15 x DSP presets with 4 selectable cardioid setups and 7 selectable crossover frequencies (80-120Hz),  2 x threaded flange (M20), 3 x corner handles, prepared for mounting of casters

Add bass

Integrates well

Product highlights:

• powered PA subwoofer
• 18" woofer in a bandpass enclosure
• built-in amplifier: 1400 watts peak
• maximum SPL: 132 dB
• frequency range: 40-120 Hz
• 4 High Pass Modes: Flat, Deep, Punch, Variable (with control)
• phase switch and output level control

Other features:

• inputs: 2 XLR
• outputs: 4 XLR (2 full-range, 2 high-pass)
• Built-Like-A-Tank™ bandpass enclosure with weather-resistant perforated metal grille
• Integrated M20-threaded pole mount
• dimensions: 20.9" W x 21.25" H x 25.9" D
• weight: 65.5 lbs.
• warranty: 1 year

What's in the box:

The new ETX Powered Loudspeakers family builds upon the industry-leading innovation and 85-year heritage of Electro-Voice audio engineering to offer the most advanced professional portable powered loudspeakers available today.
A versatile high-end choice for live entertainment venues, rental companies, pro musicians and DJs, and installed sound, the ETX Powered Loudspeakers family features three two-way models (10-inch, 12-inch and 15-inch, all with a precision HF titanium compression driver), a three-way model (15-inch with a 6.5-inch MF driver and a precision HF titanium compression driver) and two subs (15-inch and 18-inch drivers).
Positioned above the ZLX and Live X families respectively, ETX Powered Loudspeakers complete a trio of recent EV portable loudspeaker offerings-each of which was designed to bring best-in-class performance to its price point.
Inside each low-profile, tour-grade wood enclosure are a host of unique new features that set ETX Powered Loudspeakers apart, combining intelligent technology and innovative industrial design for spectacular results across all applications. EV-engineered high-efficiency transducers and high-powered Class-D amplifiers, Signal Synchronized Transducers (SST) waveguide design and smart FIR-Drive DSP all work together to provide peerless EV sound quality and precise coverage at the highest SPLs.

• 18-inch DVX woofer for extended low-frequency response
• 1800 W Class-D power amplifier with integrated FIR-Drive DSP
• 135 dB peak SPL
• Special DSP preset for true cardioid performance across the full operating bandwidth
• Combo pole cup (insert and threaded) for use with the ETX Powered Loudspeaker full range models
• Removable casters

18” Self-Powered Extended Low-Frequency Subwoofer System with Wi-Fi The JBL PRX818XLF is a self-powered extended low-frequency subwoofer system. Featuring a JBL 18-inch woofer powered by a 1500-watt class-D amplifier, PRX818XLF delivers incredible output in a lightweight and compact form factor. The PRX800 series integrates embedded ioSYS technology which enables easier setup and control when used with the HARMAN Connected PA app and compatible products. Connected PA delivers seamless plug-and-play operation with a variety of HARMAN equipment and enables you to control your entire live sound system with one app. Products within the Connected PA system self-identify and retain presets for effortless setup, and setup wizards help you quickly optimize speaker levels, configuration settings and EQ. Current products with embedded ioSYS technology and HARMAN Connected PA compatibility include the Ui24R mixer, JBL PRX800 loudspeakers, dbx Di1 direct boxes, and AKG P5i microphones. Learn more about HARMAN Connected PA. FEATURES

• Built-in Wi-Fi for wireless control of your system from anywhere in the venue
• Free PRX Connect mobile app for iOS and Android provides wireless control over volume levels, 8-band parametric EQ and up to 50ms of speaker delay to fine-tune your sound
• Class-leading 1500-watt amplifier delivers ample power to fill your venue
• JBL Differential Drive® transducers for higher SPL in a lightweight design
• Next-generation JBL neodymium compression drivers
• Redesigned Crown input technology, including XLR, 1/4” and RCA inputs plus XLR loop-through
• Intelligent variable-speed fan activates only when needed to reduce noise
• Updated tuning delivers flat frequency response and smooth off-axis behavior
• Durable wooden cabinets, tour-proven DuraFlex™ finish and dent-resistant 16-gauge grilles
• Universal power supply for worldwide compatibility
• dbx Type IV™ limiting ensures clear, accurate sound at high volumes
• Brutal testing regimen—including the famous JBL 100-hour power test—ensures reliable performance

• The PRX815XLF extended low frequency subwoofer was designed and engineered to provide sub bass frequencies with accuracy and power. Used as a single sub in a sub/ sat system or in multiples as part of a scalable, large format sound reinforcement system, the PRX815XLF performs with exceptional efficiency and control. The subs are stackable and light-weight, ensuring quick set-ups and tear-downs. Due to their rugged construction, they are perfect for AV rental inventories. With the integrated stereo pass-thru this is the most powerful low-frequency complement to the PRX full-range systems. The addition of a polarity reverse option further enables system optimization. PRX800 subwoofers feature a standard M20 threaded pole cup that can accept most modern subwoofer-mounted speaker poles.
• The PRX818XLF is a high performance self-powered subwoofer system with remote Wi-Fi control of onboard DSP EQ parameters. The PRX818XLF is comprised of a powerful 2278G Differential Drive® dual voice-coil and magnetic gap, woofer driven by a 1500 Watt Class-D power amplifier. Sophisticated DSP is at the core of a fully featured input section, providing user selectable cross-over functionality, polarity optimization, protection, dynamic limiting and discrete component optimization.
• All PRX800 cabinets are built from 18 mm, strong, light-weight poplar plywood made structurally sound with tongue and groove joints. All PRX800 Series cabinets are protected by JBL’s tour proven DuraFlex™ finish. Grilles are made from dent-resistant 16 gauge steel and handles are made from light-weight glass-filled nylon for added strength and durability. All M10 suspension points are constructed from 14 gauge steel and have been tested with a yield-strength of 1000 lbs. each
• The amplifier input panel offers stereo inputs with XLR or ¼ inch jack compatibility. A user selectable crossover ensures a smooth transition to full-range system connected to the stereo outputs. Signal present and limiter lights indicate the system status and assist in setting the optimum level via the level control knob.

The MILAN M18 is a self-powered bandpass subwoofer enclosure consisting of an 18" low frequency driver housed in an optimally tuned enclosure, together with an integrated lightweight 1kW Class D amplifier.

The amplifier provides two input channels with balanced jack/XLR connectors, and two link outputs on male XLRs, providing connections to further Milan mid-high cabinets or subwoofers. A filtered high-pass output also provides connections to other mid-high cabinets. The left and right signals are summed in the subwoofer through a low-pass filter to the 18" driver. A sub level control is provided in order to achieve an even level between the subwoofer and Milan mid-high cabinets. The M18 is available in two versions to suit regional AC mains voltages of either 110 volts or 230 volts, and mains power is supplied via an IEC mains connector.

The Class D amplifier features sophisticated signal processing which provides limiting functions to ensure high performance and long term reliability. Status LEDs indicate mains power, signal present and signal limit. The cabinet is constructed from 15mm laminated plywood and is finished in dark blue textured paint. A pole mount socket is fitted to allow Milan M15 cabinets to be mounted on optional 35mm speaker poles.

Full specifications
Net Weight     45kg (99lbs)
Dimensions     500mm x 700mm x 600mm (19.7" x 27.6" x 23.6“)
Components     1 x 18" (457mm) LF driver
Frequency Response     36Hz - 80Hz/125Hz ±3dB, 28Hz - 80Hz/125Hz ±10dB
Maximum SPL     125dB continuous, 131dB peak
Construction     18mm (3/4“) plywood enclosure finished in dark blue textured paint. Pole mount socket
Connectors     Input: (2) Jack/XLR female, wired pin 2 hot; Link: (2) XLR male, wired pin 2 hot;
Output: (2) XLR male, wired pin 2 hot; IEC mains connector
Flying Hardware     M10 rigging points on top and bottom
Spares & Accessories     LS-1816 18" (457mm) LF loudspeaker
RC-1816 Recone kit
M18AMP Amplifier module

SPECIFICATIONS    


Configuration     18" subwoofer
Transducer
    18" cone transducer
Frequency Response (-6 dB)     38 Hz - 124 Hz
Frequency Range (-10 dB)     34 Hz - 143 Hz
Maximum SPL1     135 dB peak
Amplifiers
Power Output2     1000 W Class D continuous
2000 W peak
Input Impedance (ohms)     XLR / ¼“: 38k balanced / 19k unbalanced
Controls     Power, Gain, LF Mode (Normal/DEEP™), Polarity (Normal/Reverse), Front LED (On/Off/Limit)
Indicators     Power, Signal, Standby, Limit
Connectors     Dual balanced female XLR/¼" line level input, Dual Balanced male XLR full range line level out, Remote gain control, Locking IEC power connector
Cooling     On demand, 50 mm variable speed fan
Amplifier Protection     Thermal limiting, output overcurrent, overtemperature muting, GuardRail™
Transducer Protection     Thermal limiting, excursion limiting
AC Power Input     Universal power supply 100 - 240 VAC, 50 - 60 Hz
AC Power Consumption
(1/8 Power)     100 VAC, 2.3 A
120 VAC, 2.01 A
230 VAC, 1.13 A
Enclosure
Material     15 mm painted birch plywood
Finish     Black textured paint
Grille     Rugged Powder-Coated Steel Grille
Dimensions (HWD)     20.1" x 23.4" x 29.9" with casters
510 mm x 595 mm x 761 mm with casters
Weight (Net)     88 lb (40 kg)
Available Accessories     KW181 COVER


1 For comparison purposes and in accordance with common industry practice, maximum peak SPL specifications are theoretical calculations based upon transducer sensitivity and peak available amplifier power.

2 Independent of limiters and driver protection circuits.