Content | Specifications WS1000R
- Frequency Range: 790.850 MHz - 813.800 MHz
- Switching bandwith: 0.025 MHz
- No. of channels: 160 (10 groups of 16 CHN)
- Sensitivity: -94 dBm for 30 dB SINAD, typical
- Image Rejection: >60 dB
- S/N Ratio: >105 dB (A)
- T.H.D
- Audio Output Level XLR connector: -12 dBV
- 1/4inch connector: -18 dBv
- Audio Response: 60 Hz - 16 kHz
- Dynamic Range: >95 dB A-weighted
- Dimensions (W x H x D): 212 mm x 45 mm x 160 mm
- Power Requirements: 12-18 V dc at 400mA
|
Model Description: In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Receivers and P4M Personal Monitor Mixer, P4T Transmitter
Model Details: The Model PS40E is a In-Line Power Supply (220 Vac) for LX3, LX4, ULXS4, ULXP4, and UC4 Wireless Recievers and P4M Personal Monitor Mixer, P4T Transmitter.
Specifications:
|
Antenna Booster with 10dB Gain, for use with GZA1036 Antenna-36 MHz Wide |
Technical Data
RF frequency range 470 ..... 870 MHz
Transmission loss 0 dB
Nominal impedance 50 Ohm
RF input BNC
Remarks Booster Feed: 12 V, 70 mA
Mains voltage 100 - 240 V
Mains frequency 50 - 60 Hz
Dimensions 19 ʼʼ, 1U
Weight approx. 3 kg |
Technical Data
RF frequency range 470 ..... 870 MHz
Transmission loss 0 dB (+/- 1 dB)
Nominal impedance 50 Ohm
Antenna connector BNC
Remarks max. 100 mW RF input power per channel
Dimensions 19 ʼʼ, 1 U
Mains voltage 100 - 240 V
Mains frequency 50 - 60 Hz |
The IR-300M is a hands-free infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
Wavelength | 870 nm (AM: Brightness modulation) | Modulation Method | Frequency modulation | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | Tone Signal | 32.768 kHz | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | Maximum Input Sound Pressure | 120 dB SPL | Input Sensitivity Adjustment | Adjustment range: -9 dB to 0 dB (factory preset: 0 dB) | Microphone Unit | Unidirectional electret condenser microphone | Frequency Response | 100 Hz - 12 kHz | Preemphasis | 300 μs | Input | External microphone input (φ3.5 monaural mini jack) | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | Dimensions | 64 (W) × 91.3 (H) ×27.3 (D) mm (2.52" × 3.59" × 1.07“) | Weight | 130 g (0.29 lb) (with battery and strap) | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
Reviews
There are no reviews yet.