Content | LD Systems ZONE 624 4-Zone Mixer
The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.
The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.
The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.
- Type: stereo
- Number of Zones: 4 (Master, Zone A-C)
- Installation Height: 3U
- Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
- Frequency Response: 20 - 40.000 Hz
- Microphone Channels: 2 (with phantom power 12 V)
- Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
- Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
- Microphone Channels Display Elements: On-LED
- Microphone Channels Input Impedance: 4 kOhm
- Microphone Channels Input Sensitivity: 4.5 mV
- Microphone Channels THD: 0,08 %
- Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line 4: Line, Input 6: Line/FOH
- Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
- Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
- Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
- Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
- Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
- Line Channels THD: 0,02 % (Phono 0,05%)
- input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
- Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
- Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
- Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
- Master Display Elements: 2 x 10 segment level meter
- Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
- Zone Output Connections: XLR (balanced), Terminal Block
- Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
- Zone Display Elements: 5-segment level meter
- Zone Output Levels: 24 dBu (balanced/ unbalanced)
- Output Connections Rec: 2 x RCA
- Headphone Output: 1
- Headphone Out Port: 6.3 mm jack stereo
- Headphone Output Controls: Cue Volume
- Headphone Output Voltage: 2,5 V 32 Ohm
- Additional Inputs: 2 (Emergency Input, Output Mute)
- Additional Input Connections: Terminal Block
- Additional Input Controls: Level Emergency Input
- Emergency Input Sensitivity: 5 V
- Additional Controls: power switch
- Additional Display Elements: Power-LED
- Operating Voltage: 220 - 250 V AC, 50 Hz
- Power Socket: IEC power socket
- Power Consumption (max.): 25 W
- Fuse: T 500 mAL / 250 V
- Dimensions (W x H x D): 485 x 132 x 210 mm
- Accessories included: terminal blocks, power cable, operating instructions
| REVAMP1680 is a professional 16-channel digital power amplifier with 16 x 80 watts output power @ 4 ohms, but the unit is also bridgeable to 8 x 160 watts @ 8 ohms. This 3 rack units high amplifier with very high channel separation also has a dual analog power supply with toroidal power transformers. The standby power consumption is very low, less than 0.5 watts!
Another smart feature of the REVAMP1680 is the switching mode standby power supply with multiple auto power on/off options. You can power on or power off the unit via a trigger input, audio sense... The trigger input is ideal when you want to switch on the power amplifier automatically using an external AC or DC trigger signal coming from your audio system. The amplifier will be switched on as long as the trigger voltage is present. Alternatively, you can set the power on mode switch to the audio trig position: the amp will automatically switch on when a sufficiently strong audio signal is present at the input and automatically switch off after a few minutes of silence.
This amplifier is equipped with 2 stereo bus inputs with pass through. These bus inputs are ideal when you want to hear the same audio signal in different output zones with the advantages you need less audio cables and the installation can be done very fast.
With its very low standby consumption and the fact the amplifier can easily be integrated in any audio project, the REVAMP1680 will soon become your favourite multi channel power amplifier. | • Master outputs with 3 way tone control
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 1 Mic, 7 Line, 2 Phono inputs
The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device.
Specifications Input channels: 1 x Microphone, combo XLR/Jack
7 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master (Balanced), XLR/RCA
1 x Headphones, 6.3mm Jack
Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | • Gain settings at backside
• Special front input for phone/mp3 devices
• Zone control for 3 balanced outputs
• 2 Mic, 11 Line inputs
The IMIX-7.3 is a compact installation mixer with zone control. It has exact the same functionality as the IMIX-7.1 but each input on the IMIX-7.3 can be routed to the desired output. This function makes it possible to control 3 areas with different music, sound level and EQ settings.
Specifications Input channels: 2 x Microphone, combo XLR/Jack
11 x Line, RCA
2 x Phono, RCA
1 x Phone, 3,5mm jack
Output channels: 3 x Master Balanced, XLR
1 x REC output, RCA
1 x Headphones, 6.3mm Jack
Master EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Mic EQ: 80Hz, 1KHz, 12KHz, -12dB / +12dB
Frequency response: 20Hz – 20Khz
T.H.D.: | Rane Commercial SM26S Six-Channel Rackmountable Splitter/Mixer
Rane Commercial SM 26S Overview
The Rane SM26S is a unique, dual purpose mixer capable of mixing audio signals and distributing audio via any of the 6 outputs. There are 6 balanced mono inputs and outputs complete with gain and pan control. Pan controls place the channel's signal into the stereo field. As a splitter, the Pan controls assign which output channels distribute incoming signal. There is a separate Left and Right stereo input for incoming signals when using the SM26S as a splitter mixer. Also featured are stereo (Left/Right)"Expand" Output for cascading multiple SM26S. There is no maximum limit as to how many SM26S can be linked.
The Rane SM26S is capable of mixing and distributing signals out of 6 mono outputs. There are 6 mono inputs and 6 mono outputs, 2 sets of stereo (L/R) outputs and a set of stereo (L/R) inputs. Both a mixer and audio distributer, the Rane SM26S is flexible and versatile enough for any sound reinforcement application.
The SM26S features balanced 1/4" TRS phone inputs and outputs for maximum gain and lower noise floor.
PAN pots are featured on channels 1-6 and control stereo placement of audio when the SM26S mono inputs are in use. As a splitter, the PAN control may be used to assign which outputs distribute the incoming stereo signal.
The external power supply is effective in reducing noise created by "dirty" AC power and bad grounds.
Total # Of Inputs |
8 - Active Balanced 1/4 TRS" Phone Inputs:
Mono channels 1-6
Stereo Input (Left/Right) |
Output |
8 - Active Balanced TRS 1/4" TRS Phone Outputs:
Mono channels 1-6
Mix Output (Left/Right)
Expand Out:
Stereo Output (Left/Right) |
Monitor/Headphone Out |
No |
Impedance |
Inputs: 20 kOhms
Outputs: 200 Ohms |
Gain |
Overall Gain Range - Off to +12 any input to any output |
THD & Noise |
0.006 limit = .002% +4dBu, 20-20kHz unity gain |
Frequency Response |
10Hz - 56kHz +0/-3 dB |
Metering |
No |
Controls |
Rotary Pots:
Channel Gain (ch 1-6)
Mix/Pan (ch 1-6)
Master Output
Master Input
Power Switch |
Phantom Power |
No |
Power |
18-24VAC w/center tap 300mA Max Current |
Dimensions |
1.75 x 19 x 5.3" (4.4 x 48.3 x 13.5cm) |
Weight |
9lbs (4.1kg) |
|
The JBL Commercial CSM-32 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-32 features three stereo music inputs with gain control and clip LEDs, and two stereo outputs with active crossovers and dedicated subwoofer outputs. |
Reviews
There are no reviews yet.