LD SYSTEMS LDZONE624 ZONE 624 – 19″ 4-Zone Mixer 3U

510.00 incl. GR VAT

Available on backorder

EAN: 4049521154355
Installments calculation
CompareAdd to wishlist Submit Better Price
LD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive […]

 

Read more

LD Systems ZONE 624 4-Zone Mixer

The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas.

The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface.

The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.

  • Type: stereo
  • Number of Zones: 4 (Master, Zone A-C)
  • Installation Height: 3U
  • Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
  • Frequency Response: 20 – 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 4.5 mV
  • Microphone Channels THD: 0,08 %
  • Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
  • Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
  • Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
  • Line Channels THD: 0,02 % (Phono 0,05%)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 5 (Master – Stereo, 3x Zone – Mono, Rec – Stereo)
  • Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
  • Master Display Elements: 2 x 10 segment level meter
  • Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
  • Zone Output Connections: XLR (balanced), Terminal Block
  • Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
  • Zone Display Elements: 5-segment level meter
  • Zone Output Levels: 24 dBu (balanced/ unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 2,5 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Additional Input Connections: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Emergency Input Sensitivity: 5 V
  • Additional Controls: power switch
  • Additional Display Elements: Power-LED
  • Operating Voltage: 220 – 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 25 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 485 x 132 x 210 mm
  • Accessories included: terminal blocks, power cable, operating instructions
Weight 6.40 kg

Reviews

There are no reviews yet.

Be the first to review “LD SYSTEMS LDZONE624 ZONE 624 – 19″ 4-Zone Mixer 3U”

Your email address will not be published. Required fields are marked *

Quick Comparison

LD SYSTEMS LDZONE624 ZONE 624 - 19" 4-Zone Mixer 3U removeINTERM L-1400 AMPLIFIER 2X450W removeJBL CSM-32 PUBLIC ADDRESS MIXER removeDAP AUDIO D2352 IMIX-5.3 5 Channel 4U install mixer, 3 zones removeLD SYSTEMS LDMS828 MS 828 19" 8-Channel Splitter/Mixer removeLD SYSTEMS LDZONE423 ZONE 423 - 19" 2-Zone Mixer 2U remove
NameLD SYSTEMS LDZONE624 ZONE 624 - 19" 4-Zone Mixer 3U removeINTERM L-1400 AMPLIFIER 2X450W removeJBL CSM-32 PUBLIC ADDRESS MIXER removeDAP AUDIO D2352 IMIX-5.3 5 Channel 4U install mixer, 3 zones removeLD SYSTEMS LDMS828 MS 828 19" 8-Channel Splitter/Mixer removeLD SYSTEMS LDZONE423 ZONE 423 - 19" 2-Zone Mixer 2U remove
Image
SKULDZONE624L-1400CSM-32D2352LDMS828LDZONE423
Rating
Price 510.00 incl. GR VAT 1,075.00 incl. GR VAT 472.00 incl. GR VAT 355.87 incl. GR VAT 230.00 incl. GR VAT 390.60 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentLD Systems ZONE 624 4-Zone Mixer The ZONE 624 is a fully-equipped zone mixer with 6 line and 2 microphone channels, that can be assigned to a stereo or a mono master output. The compact 3U rack device also has inputs for an external emergency announcement system and remote-controlled switching mute. Due to its extensive connectivity the ZONE 624 is the extremely flexible control centre solution for PA systems in food outlets, clubs, hotels, fitness centres, and many other areas. The two balanced microphone inputs have a shared 3-band EQ, 12V phantom power and Talkover functions; the Talkover attenuation can be individually set for all zone outputs on the back of the unit. The 6 stereo input channels of the ZONE 624 are equipped with gain control, signal and peak LEDs, 45 mm faders, Cue buttons and RCA connections; channel 6, in addition with balanced TRS inputs for FOH signals. The device also has a switchable Aux input via 3.5mm mini jack and a USB port, that is used as a stereo input and output (recording out) and turns the ZONE 624 into an external audio interface. The master section outputs are electronically balanced and use XLR connectors and terminal block connectors. The stereo zone also has unbalanced RCA connectors. The maximum output level for all of the zones can be individually set. The three mono outputs of the ZONE 624 each have a 2-band EQ, a selectable 100 Hz high pass filter, and a MIC mute switch with a level indicator; the inputs 1-6 or the stereo master signal can be selected as a source. The stereo output is equipped with a 3-band EQ, a control for the Talkover sensitivity and two LED chain level meters. Furthermore, the ZONE 624 has a recording output and a controllable PFL headphone jack for previewing.
  • Type: stereo
  • Number of Zones: 4 (Master, Zone A-C)
  • Installation Height: 3U
  • Total Input Channels: 8 (2x Mic, 1x AUX/Line, 2x Phono/Line, 2x Line, 1x FOH/Line
  • Frequency Response: 20 - 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channels Connections: 2X 6.3 mm jack (balanced), 1x XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: 2x Gain, 2x On/Off, 1 x EQ Hi, 1x EQ Mid, 1 x EQ Low, 1x Talkover
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 4.5 mV
  • Microphone Channels THD: 0,08 %
  • Line Channels: 6 (Input 1: Aux/Line, Input 2 + 5: Line/Phono, Input 3: USB/Line  4: Line, Input 6: Line/FOH
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack, input 2.4 5: 2 x RCA, input 3: 2 x RCA, input 6: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, AUX enable, Cue, Level, 2x Phono/Line, FOH On
  • Line Channels Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 50 kOhm)
  • Line Channels Input Sensitivity: 2,1 V (Phono 25 mV)
  • Line Channels THD: 0,02 % (Phono 0,05%)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 5 (Master - Stereo, 3x Zone - Mono, Rec - Stereo)
  • Master Output Connectors: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ Hi, EQ Mid, EQ Low, Max. Level, T/O Sensitivity, T/O Damping
  • Master Display Elements: 2 x 10 segment level meter
  • Master Output Levels: 24 dBu (balanced), 17 dBu (unbalanced)
  • Zone Output Connections: XLR (balanced), Terminal Block
  • Zone Controls: Level, Source, Cue, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Include Mic, T/O Damp
  • Zone Display Elements: 5-segment level meter
  • Zone Output Levels: 24 dBu (balanced/ unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 2,5 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Additional Input Connections: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Emergency Input Sensitivity: 5 V
  • Additional Controls: power switch
  • Additional Display Elements: Power-LED
  • Operating Voltage: 220 - 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 25 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 485 x 132 x 210 mm
  • Accessories included: terminal blocks, power cable, operating instructions
L1400 450W-450W 4ohm (280W-280W8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.

The JBL Commercial CSM-32 offers fixed I/O, pre-configured architecture, full stereo or mono operation, flexible routing and control of multiple audio sources, simple front-panel configuration and control without the need for a computer, compatibility with the CSR wall controllers, compatibility with the CSPM paging microphones, and optional duplication of audio channels to another device via a Cat5 cable. The CSM-32 features three stereo music inputs with gain control and clip LEDs, and two stereo outputs with active crossovers and dedicated subwoofer outputs.

• Master outputs with 3 way tone control • Special front input for phone/mp3 devices • Zone control for 3 balanced outputs • 1 Mic, 7 Line, 2 Phono inputs The IMIX-5.3 is a basic 3 zone control mixer. It has a logical design and all functions are very clear and easy to control. Each channel has 3 output buttons to route the channel to your desired area/zone. All outputs have their own EQ settings and with the PFL function you can monitor each area/zone with a pair of headphones. At the front it has direct inputs for microphone, line and a phone/mp3 device. Specifications Input channels: 1 x Microphone, combo XLR/Jack 7 x Line, RCA 2 x Phono, RCA 1 x Phone, 3,5mm jack Output channels: 3 x Master (Balanced), XLR/RCA 1 x Headphones, 6.3mm Jack Master EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB Mic EQ: 100Hz, 1KHz, 10KHz, -12dB / +12dB Frequency response: 20Hz – 20Khz T.H.D.:LDMS828 - 19" Line Mixer 8 in 2 and Splitter 2 in 8 The LD Systems LDMS828 is a mixer, splitter, and booster amplifier in 19” rack format for flexible live and studio applications. The LDMS828 has one stereo and six mono channels with individual LED level metres; all inputs and outputs are electronically balanced. Two mono channels are equipped with stereo TRS sockets, the other connectors are XLR sockets. The stereo channel has individual volume controls for input and output and a link button for looping through the signal; each mono channel has volume and panorama controls as well as a button that toggles between the splitter and mixer functions. TheLDMS828 by LD Systems is impressive not only because of its practical features, but also because of its technical specifications. The broad frequency response of 5 - 40,000 Hz, a dynamic range of 85 dB, and the extremely low total harmonic distortion of 0.0008% guarantee maximum signal fidelity. The nominal working level of -10 dBV to +4 dBU makes the mixer/splitter suitable for connection to both professional and consumer equipment.
Product type
Mixers
Type
Installations
Channels
8
Mono input channels, line
6
Mono line input connectors
2 x 6.3 mm TS
Mono line input type
Electronically balanced
Stereo Line Input Channels
1
Stereo Line Input Connectors
2 x XLR
Stereo Line Input Type
Electronically balanced
Input impedance
(balanced) 50000 Ohm(s), (unbalanced) 25000 Ohm(s)
Max. input level
+ 21 dBu
Nominal working level
-10 dBV - +4 dBu
Mono output channels
6
Mono output connectors
2 x 6.3 mm TS
Mono output type
Electronically balanced
Stereo output channels
1
Stereo output connectors
1 x XLR
Stereo output type
Electronically balanced
Output impedance
(balanced) 60 Ohm(s), (unbalanced) 30 Ohm(s)
Max. output level
+22 dBu
Frequency response
5 - 40000 Hz
THD
0.0008 %
S/N Ratio
85 dB
Controls
Level Channel 1-6, Main Input Level, Main Link, Main Output Level, Power, Splitter/Mixer Channel 1-6
Indicators
In/Out Level Channel 1-6 (6 -segment), Input Level LED Indicator (6-segment), Output Level Indicator (6-segment), Power
Operating voltage
220 V AC - 240 V AC, 50-60 Hz
Mains connector
IEC power connector
Power consumption
15 W
Fuse
T 315 mAL, AC 250V
Width
483 mm
Height
44.5 mm
Depth
216 mm
Weight
3 kg
Accessories (included)
Power cord
     
User's manual [5,41 MB] LD Systems zone 423 2-Zone-Mixer The ZONE 423 is a full featured zone mixer with 4 line and 2 microphone channels, that can be assigned to a master and a zone output, as well as inputs for an external emergency announcement system and remote-controlled switching mute. Through versatile connectivity, the compact 2U rack device is the perfect control centre for PA systems in food outlets, clubs, hotels, fitness centres, and is also excellent for presentations and DJs. In addition to the two balanced microphone inputs with variable Gain and Talkover level,12V-phantom power, and a shared 3-Band-EQ, the ZONE 423 offers Line, Phono-, and Aux-stereo connections in RCA format, a FOH-input with balanced stereo jack plugs as well as a USB and 3.5mm mini jack. The USB-port is used as a stereo input and output and allows the mixer to be used as an external audio interface. The four input channels have individual gain controls with signal and peak value display, 45 mm faders for adjusting the volume and cue buttons. The master and zone sections each have their own EQ, balanced XLR and unbalanced RCA outputs: the master output via terminal block connectors and the zone output using a mono sum switch, and 100 Hz high-pass filter. The stereo level indication can be set to master or zone, and the maximum output level can be preset for both on the back of the mixer. In addition to an adjustable headphone connection for pre-listening, the ZONE 423 also has a recording output.
  • Type: stereo
  • Number of Zones: 2 (Master, Zone)
  • Installation Height: 2U
  • Total Input Channels: 6 (2x Mic, 1x Line/Aux, 2x Line/Phono, 1x Line/FOH)
  • Frequency Response: 20 - 40.000 Hz
  • Microphone Channels: 2 (with phantom power 12 V)
  • Microphone Channel Connections: 6.3 mm stereo jack (balanced), XLR / 6.3 mm jack (Combo)
  • Microphone Channel Controls: Gain, On/Off, 1 x EQ Hi, 1 x EQ Low, 1 x Talkover, 1 x Talkover Level
  • Microphone Channels Display Elements: On-LED
  • Microphone Channels Input Impedance: 4 kOhm
  • Microphone Channels Input Sensitivity: 8 mV
  • Microphone Channels THD: 0,07 %
  • Line Channels: 4 (Input 1: USB/Line, Input 2 + 3: Line/Phono/CD, Input 4: Line/FOH)
  • Line Input Connectors: Input 1: 2 x RCA + 3.5 mm stereo jack + USB, input 2 + 3: 4 x RCA, input 4: 4 x RCA + 2 x 6.3 mm jack
  • Line Channel Controls: Gain, Source, Cue, Level, Enable FOH
  • Line Channel Display Elements: Signal/0 dB-LED, Cue-LED
  • Line Channel Input Impedance: 6 Kohm (Phono 60 kOhm)
  • Line Channels Input Sensitivity: 1 V (Phono 10 mV)
  • Line Channels THD: 0,03 % (Phono 0,05 %)
  • input sensitivity AUX/Line (3.5 mm stereo jack): 3 V
  • Line Outputs: 3 (Master - Stereo, Zone - Stereo/Mono, Rec - Stereo)
  • Output Connectors Master: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Master Controls: Level, EQ HI, EQ Mid, EQ Low, Max. Level
  • Master Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
  • Master Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
  • Zone Output Connections: 2 x XLR (balanced), RCA (2 x), Terminal Block
  • Zone Controls: Level, Source Input 2 - 4/Mix, EQ Hi, EQ Low, Max Level, 100 Hz High Pass, Mono
  • Zone Display Elements: 2 x 10 segment level meter (switchable Master/Zone)
  • Zone Output Levels: 21 dBu (balanced), 18 dBu (unbalanced)
  • Output Connections Rec: 2 x RCA
  • Headphone Output: 1
  • Headphone Out Port: 6.3 mm jack stereo
  • Headphone Output Controls: Cue Volume
  • Headphone Output Voltage: 1,2 V 32 Ohm
  • Additional Inputs: 2 (Emergency Input, Output Mute)
  • Connections Additional Inputs: Terminal Block
  • Additional Input Controls: Level Emergency Input
  • Input Sensitivity Emergency Input: 5 V
  • Additional Controls: power switch
  • Operating Voltage: 220 - 250 V AC, 50 Hz
  • Power Socket: IEC power socket
  • Power Consumption (max.): 22 W
  • Fuse: T 500 mAL / 250 V
  • Dimensions (W x H x D): 483 x 89 x 210 mm
  • Accessories Included:    terminal blocks, power cable, operating instructions
 
Weight6.40 kg14.40 kg2.00 kg2.50 kg3.00 kg3.30 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 6.40 kg
Weight 14.40 kg
Weight 2.00 kg
Weight 2.50 kg
Weight 3.00 kg
Weight 3.30 kg