Content |
Sleek. Portable. Powerful. Today\'s performers demand greater performance than ever before from portable PA systems. Mackie has risen to that challenge and created the SRM215 V-Class Loudspeaker. This 2,000-watt portable PA fits easily on your front seat and loads into the venue in just one trip. Complete with a 15" LF driver and 1.4" Sym-X Horn HF driver, the SRM V-Class Loudspeaker delivers impressive SPLs with tons of headroom for full and accurate articulation. Simply put, this sleek and stylish loudspeaker was designed to be the loudest and best-sounding speaker in Mackie\'s lineup. It\'s equipped with Advanced Impulse DSP and Intelligent Bass Management that create an unbelievably expansive sweet spot. This speaker is completed by a 4-channel digital mixer with in-app control and Bluetooth streaming capabilities. Additionally, the dual-angled cabinet design allows it to be used as a high-performance floor monitor. So, however you use it, the Mackie SRM215 V-Class Powered Speaker will deliver consistent and clear sound every time. Robust LF driver and custom Sym-X Horn HF driver combine for incredible performance The Mackie SRM V-Class Loudspeaker may pump out 2,000 watts of reliable Class D power, but the secret to its great sound is in the drivers. The SRM215 is loaded with a 15" woofer and a custom polymer tweeter. Both drivers have high-performance transducers and oversized magnets that transmit your audio with unmatched accuracy. For optimal efficiency, the horn-loading frequency is set below the tweeter\'s low-frequency capability. You\'ll enjoy the symmetrical, flat response at the crossover point for smooth transitions. Simply put, the Mackie SRM V-Class Loudspeaker is versatile enough to handle any application you can imagine. Tech Specs - Powered: Yes
- Power Configuration: Single Amp
- Channels: 4-channel mixer
- LF Driver Size: 15" woofer
- HF Driver Size: 1.4" Sym-X Horn
- Total Power: 2000W Class D
- Bluetooth: Yes
- Wireless: Bluetooth
- Frequency Response: 40Hz-20kHz
- Maximum Peak SPL: 136 dB SPL @ 1m
- Horizontal Coverage Angle: 90°
- Vertical Coverage Angle: 60°
- Signal Processing: Advanced Impulse DSP
- Software: SRM Connect App
- Enclosure Material: Molded Plastic
- Mounting Options: Pole, Floor Wedge, Fly
- Height: 28.8"
- Width: 15.4"
- Depth: 17.6"
|
Two-way active full range with DSP. 1500W
15'' woofer, 3'' driver, 50 x 40 dispersion.
1000W + 500W class D power amplifier.
Optional: LD2.4 USB interface for remote PC connection.
CV-Spot protective cover. NOTE : SPOT 1500 can not drive the bass cabinet SPOT15B.
|
Specifications
- LF Amplifier Power (RMS): 1000 watts
- HF Amplifier Power (RMS): 250 watts
- Frequency Response (-3dB): 58-18000 Hz
- Frequency Response (-10dB): 50-20000 Hz
- Max. SPL/1m (calc); half space: 133 dB
- Coverage (nominal -6dB) Horizontal: 90°
- Coverage (nominal -6dB) Vertical: 50°
- LF Transducer: DVX3150
- HF Transducer: ND2
- Crossover Frequency: 1500 Hz
- Enclosure Material: Polypropylene
- Flying: Yes
- Input Connections: XLR
- Chassis Size: 15“
- Speaker Type: Full-range, powered monitors, poweredspeakers, two-way wedges
- Weight (net): 50.49 lbs
- Dimensions (H x W x D): 27.24" x 17.56" x 16.18“
|
Features: DH-1K 1.5-inch Titanium Diaphragm Compression Driver EVS-15K 15-inch Woofer 124 dB max. SPL 500 W Class-D Amplifier Integrated DSP with FIR filter Cabinet Powered two-way full-range speaker, 15" woofer, 1.5" compression driver, vented design Maximum Amplifier Output Capability, IHF-A 500 W Amplifier Power RMS 420 W Max. SPL 1m / calc. 124 dB Frequency Range (-10 dB) 50 Hz to 17 kHz Nominal Coverage Angle 90° x 50° (Horizontal x Vertical) Audio Input (LINE 1 or MIC/LINE 2) XLR and 1/4" TRS combination Audio Input (AUX) Stereo RCA, unbalanced Audio Output (LINK OUTPUT) XLR, balanced Digital Signal Processing 28/56-Bit, 48 kHz Crossover Frequency 1.7 kHz Product Dimensions (W x H x D) 708 x 432 x 382 mm Net Weight 22.5 kg Optional Accessories --- SH-115A, Dust Cover F01U270396 VPM 1500, variable speaker pole F01U141047 BS 35, speaker stand F01U141046 |
JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System
Key Features : Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.
2200 Watts peak output power, 1100 Watts continuous.
HiQnet? compatible; network control.
15-inch Differential Drive? low-frequency driver for extended low-frequency output.
60° x 40°coverage.
Stylized and ergonomically designed powder-coated die cast aluminum handles.
Six 3-inch fly track suspension points and fourteen M10 fittings (optional detachable flying fittings and forged eye bolt kits available).
Optional DPCN (CobraNet?) digital audio input module available. Specifications:
Frequency Range |
: |
34 Hz to 20 kHz (-10 dB) |
Frequency Response |
: |
43 Hz to 18 kHz ( ± 3 dB) |
Coverage Pattern |
: |
60°x 40° rotatable waveguide |
Directivity Factor (Q) |
: |
15.85 |
Directivity Index (DI) |
: |
12 dB |
Maximum Peak Output1 |
: |
138 dB SPL 1m |
Transducer Section |
|
|
Low Frequency Section |
: |
JBL 2265G, 381mm (15 in) dia., 76mm (3 in) Dual Coil neodymium Differential Drive?, Direct Cooled |
Bandpass Nominal Impedance |
: |
4 ohms |
Mid/High Frequency Section |
: |
|
Mid Frequency |
: |
JBL CMCD-82H, 200mm (8in) Dual Coil Differential? transducer |
High Frequency |
: |
JBL2452H-SL, 100mm (4in) titanium damped diaphragm, 1.5in. exit |
Waveguide |
: |
JBL PT-K64-MHF |
Bandpass Nominal Impedance |
: |
8 ohms
|
System |
|
|
DP2 Internal Amplification Output (at nominal load) |
: |
2200 Watts Peak, 1100 Watts Continuous |
DP2 Output (Continuous IEC shaped pink noise into rated load impedance) |
: |
750LF/350HF Watts |
DP2 Output Section |
: |
2-Channel, Class I |
Audio Input connector: |
: |
XLR with loop-through |
Network Control Connector |
: |
Ethernet, RJ45 |
Signal Processing |
: |
DSP Based, resident in Input Module |
System Management
|
: |
DSP based limiters for mechanical and thermal protection |
AC Power Operating Range |
: |
Auto Select 90-132VAC/ 216-264VAC, 50/60Hz
|
AC Line Voltage |
: |
50/60 Hz, Auto-Detect; 120V/ 240V (-15%, +10%) |
AC Input Connector |
: |
Neutrik PowerCon |
AC Loop-Thru |
: |
Neutrik PowerCon |
AC Current Requirement |
: |
6A per system at 120V, 3A per system at 240V |
Enclosure |
|
|
Box Construction |
: |
5/8in. multi-ply exterior grade Baltic birch. Internally braced. Black DuraFlex? finish.
|
Suspension System |
: |
6 standard air-cargo 3 in. track and 12 M10 fittings
|
Grille |
: |
14 Gauge Black powder-coated perforated steel with foam backing
|
Dimensions (H x W x D) |
: |
914.4 x 528.3 x 624.8mm (36 x 20.8 x 24.6 in) |
Net Weight |
: |
44 kg (97 lb) | |
Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.
SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.
5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.
- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.
APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.
|
Reviews
There are no reviews yet.