| Content |
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: n/a
? Shell Color: Nickel |
EtherCon? ruggedized RJ45 connectors provide solutions for data transfer
in harsh demanding environments by offering a cable carrier and receptacle
that helps to protect the contacts of the RJ45 connections. Designed to
protect the fragile latch and cover of standard RJ45 connectors from breakage,
you will find uses for this connector system in Ethernet networking of audio,
commercial, entertainment, stage production, DMX lighting, industrial and
outdoor Internet access applications.
The Ethercon series offers both male cable carriers and assembled female
receptacles. The cable end offers a robust diecast shell as a carrier for pre-
assembled RJ45 plugs. Female chassis connectors are based on the current
Neutrik "A" series as well the "D" series of XLR receptacles with secure latching
system - a feature not found on other RJ45 receptacles. Termination is offered
in both IDC Krone and IDC 110 punch down terminals. Neutrik Ethercon products
comply with Category 5 shielded or unshielded and are compatible for use with
10 Base-T and 100 Base-TX systems. ? Connector type: Receptacle, IDC Krone
terminals, "A" style ? Mfg. #NE8FAV-YK |
The rearTWIST HD BNC cable connector offers a true 75 Ω design and is perfectly suitable for HD applications.
The patented rearTWIST boot guarantees easy access even in high density applications and offers color coding.
Suitable cables:
Belden 1855A, Clark Wire CD7523-7, CommScope 7538, Cordial CVI 4(5...)
Crimp size:
Pin: 1.6 mm (square)
Shield: 4.53 mm (hex)
Features & Benefits
- “rearTWIST Principle” locking/unlocking using the easily accessible soft touch boot (Patent DE 100 48507)
- Ideal for recessed bulkheads where access to the “head” of the connector might be an issue. These connectors turn from the back and not the front.
- True 75 Ω design meets the stringent HDTV / DVD requirements
- Leading area: Avoids tilting due to side forces to protect contacts from deformation. Guarantees a lifetime of min. 1000 mating cycles!
- Snug-fit center pin insert provides tactile feedback
- Shield and jacket crimp technology prevents the problem of an exposed grounding braid on cable assemblies
- Excellent cable protection and retention
- Precise Swiss machined brass parts for outstanding durability
- Accessories include color coded boots in 10 standard colors, crimp tool and dies
| Title |
NBNC75BDD6 |
| Connection Type |
BNC 75 Ω |
| Gender |
male |
| Contact resistance |
≤ 3 mΩ (inner) |
| Contact resistance |
≤ 2 mΩ (outer) |
| Dielectric strength |
1,5 kVdc |
| Insulation resistance |
> 5 GΩ |
| Rated voltage |
<50 V |
| VSWR |
≤1.050/>32 dB up to 1 GHz
≤1.065/>30 dB up to 2 GHz
≤1.100/>26 dB up to 3 Ghz |
| Cable O.D. |
4.3 mm |
| Cable retention |
> 30 N (Center) |
| Crimp size |
4,53 Hex crimp (shield) acc. IEC 60803 (die designation C) |
| Crimp size (pin) |
1,6 Square crimp (pin) acc. IEC 60803 (die designation 2) |
| Insertion force |
< 25 N |
| Lifetime |
> 1000 mating cycles |
| Wiresize |
|
| Locking device |
Bayonett |
| Cable anchoring |
Jacket crimping |
| Contacts |
Brass (CuZn35Pb2), 0.2 µm AuCo (Center contact) |
| Insert |
PTFE |
| Shell |
Brass (CuZn39Pb3) |
| Shell plating |
Optalloy® |
| Temperature range |
-30 °C to +85 °C |
| Contact crimpability |
Complies with IEC 60803 and IEC 60352-2 |
|
Neutrik E8 MC-B-1
Cable Connector Carrier black water-protected IP54
The connector carrier consists of a black chrome shell, fixing disk, chuck, brush, and boot. The boot (identical with the XLR X series) is suitable for cable diameters of 3.5 - 8 mm. For bulk cable. RJ45 plug not included.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust, lockable solution.The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
Product type
Plugs and Connectors
Type
Other Plugs and Connectors
Gender
male
Temperature range
-30 to 80 °C
Cable diameter
max. 8 mm
Housing
die-cast zinc
Weight
0,03 kg
|
- For Pre-Assembled RJ45 Plugs
- Lockable Cable Connection Carrier
- Die-Cast Shell with Bushing & Boot
- Up to 0.31" Cable Diameter
- Chuck-Style Strain Relief
- RJ45 Plug Not Included
RJ45 cable connector carrier for pre-assembled RJ45 plugs consists of black chromium shell, bushing and boot. Packed with two cable protection elements for cable diameter up to 8 mm. Cable connector carrier does not include a RJ45 plug.
The etherCON cable connector carrier upgrades a conventional RJ45 connector to an extremely robust lockable solution.
ATTENTION: Does not intermate with the CAT6 chassis connectors NE8FDY-C6 and NE8FDY-C6-B.
Neutrik NE8MX-B Overview
Upgrade the protection of a pre-assembled RJ45 plug with the NE8MX-B etherCON RJ45 Cable Connector Carrier for Pre-Assembled RJ45 Plugs from Neutrik. Boasting a black chromium die-cast shell, bushing, and boot, the NE8MX-B comes with chuck-style strain relief, as well as two cable-protection elements for cable diameters up to 0.31".
Note: The NE8MX-B does not include an RJ45 plug, and it does not intermate with Neutrik NE8FDY-C6 and NE8FDY-C6-B Cat 6 chassis connectors.
Ideal for harsh and demanding environments, the NE8MX-B is designed to protect Ethernet connections in a variety of commercial applications, and it helps to prevent breakage of the fragile components of standard RJ45 connectors. The carrier allows for the assembly of pre-assembled conventional RJ45 cables.
AMP
- 5-554169-3
- 5-554720-3
- 5-554739-3
- 5-558530-2
- 5-558530-3
- 5-569530-3
- 5-569532-2
Black Box
- FM731
- FM730
Bomar
- 300068S
- 300568
DRAHTEX
- 220.0100
- 220.0200
- 220.0201
Eucon
- MPS-88R30
- MP-88R30
Hirose
- TM11
- TM21
- TM31
Nippon Seisen
- NSP624-S
Stewart
- SS-37000-002
Vertical Cable
- 012-021
|
BNC Bulkhead Chassis Connectors. Based on a new production technology,
the machined brass connector body provides and extremely rugged and non-
abrasive connection over long term use. They are an ideal combination when
used in conjunction with Neutrik 75 ohm BNC Rear Twist or Push-Pull cable
connectors. Available in isolated or grounded versions, in "D" shaped housing
or single feed through chassis mountings. Isolated versions solve potential
grounding problems and prevent common-mode influence with other connections
conducted over the same panel ground potential. Gold plated center contact.
Excellent return loss / VSWR rating.
? Connector Type: BNC Isolated Chassis w/Solder Tabs ? Housing: "D" Series
? Shell Color: Black |
Reviews
There are no reviews yet.