| Stock | Only 1 left in stock (can be backordered)
| In stock (can be backordered)
| In stock (can be backordered)
| In stock (can be backordered)
| Only 5 left in stock (can be backordered)
| Only 1 left in stock (can be backordered)
|
| Content |
3 pole female cable connector, "heavy duty“, all metal design, gold contacts The X-HD Series is a "Heavy duty" XLR cable connector for outdoor use. All metal design, dust and water protected according to IP 65 by mating with related X-HD cable connector or MPR-HD chassis connector. Gold contacts are standard. - “Heavy duty" cable connector for outdoor use
- All metal design
- NC*FX-HD mates with NC*MPR-HD chassis connector and NC*MX-HD cable connector
- Dust and water protected according IP 65 in mated condition
- Gold contacts
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
| These compact, low profile, right angle cable connectors are designed to select any
of 7 positions in 45° increments by rotating the assembled insert into various indents
before securing the back cover. Connector type: XLR female.
Shell: Nickel. Contacts: Silver | This series has become the accepted worldwide standard for XLR cable connectors.
The compact design offers the shortest XLR cable version in the industry. The female
features an insert that's completely surrounded by metal for added protection and the
shell has a rubber ring for secure mating to a male XLR or microphone. Assembly is
quick and easy with no screws to worry about and includes the unique Neutrik chuck
type strain relief. | B-NE3FX - XLR female extension 3pin | NC3FXS-B
Female with noiseless ON-OFF rotary switch (shorts no. 2 and 3). Black metal
housing and gold contacts.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard
NC3FXS Female with noiseless ON-OFF rotary switch |
Male, heavy duty version with metal boot and stainless steel shell.
Electrical Specifications:
* Number of contacts: 4
* Contact resistance: = 3 m ohm
* Insulation resistance, initial: > 2 G ohm; after damp
heat test: > 1 G ohm
* Dielectric strength: 1500 V dc
* Rated current: 10 A
* AWG: 2.5 mm²/14 AWG
* Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles
* Insertion / withdrawal force: = 20 N
* Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
* Shell (male): stainless steel and zinc diecasting combined.
* Insert: PA 6.6 30% GR (glass reinforced)
* Contacts: CuZn39Pb3
* Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
* Strain-relief clamp: POM
* Antikink bushing: PUR
* Sealing jacket: EPDM |
Reviews
There are no reviews yet.