Content |
6 pole female cable connector with Nickel housing and silver contacts. The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. - Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
| NC3MXX-B
3 pole cable connector, male. Black metal housing and gold contacts.
The 3 Pole Male Cable Connector from Neutrik is manufactured with a black metal housing and gold contacts.
It is reliable, easy to assemble and improves contact integrity as well as cable strain relief.
Male connector with improved locking recess without "window“, more stringent housing increases durability Improved chuck type strain relief provides higher pull-out force and makes assembly easier and faster Boot with polyurethane gland gives high protection to cable bending stresses Colored rings and boots available for coding or identification Sleek and ergonomic design - valuable and handy Rugged zinc diecast shell, longlasting and dependable Internal thread on shell is well proteced against any damage TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m Ohm
Insulation resistance
- initial: > 2 G Ohm
- after damp heat test: > 1 G Ohm
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4 pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: Zinc diecast ZnAl4Cu1, gal Cr over Cu plating
Insert: Polyamide PA 6.6 30% GR (glass reinforced)
Contacts: Brass (CuZn39Pb3)
Contact surface: gal 0.2 ?m Au hard alloy over 2 ?m Ni
Strain-relief clamp: POM
Antikink bushing: PA + PU
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard | B-NE3MX - XLR male extension 3pin | XLR Cable Connectors / EMC-XLR
The EMC-XLR cable connector is the answer for a noise-safe audio signal connection.
3 pole male / female XLR cable connector with capacitive cable shield - shell connection
to avoid RF-interference and LF-noise. 360° shield contact on female connector ensures
best possible shielding and chassis contact.
TECHNICAL DATA
Electrical
Rated current per contact: 5 A
Shielding effectiveness: > 55 db@ 1 GHz
Cableshield - shell connection: capacitive
Cableshield - Pin 1 connection: EMI suppression bead
Contact resistance after lifetime: < 3 m Ohm
Insulation resistance: initial > G Ohm, > 1 G Ohm
Dielectric strength: 1500 V dc after damp heat test
Mechanical
Retention method: chuck type
Life time (mating cycles): > 1000 cycles
Cable O.D. range: 4 - 7 mm
Wiring: soldering (AWG 20 - AWG 24)
Solderability: complies with IEC 68-2-20
Materials
Contacts: Brass (CuZn39Pb3), gold plated
Shell, shield contact: Zinc diecast (ZnAl4Cu1)
Strain relief clamp: POM
Bushing: PA / PU
Insert: PA 6.6 30% GR
Environment
Temperature range: -30° C to +80° C
Flammability: UL 94 HB | XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
Electrical Specifications:
* Number of contacts: 5 * Contact resistance: = 3 m ohm * Insulation resistance, initial: > 2 G ohm; after damp heat test: > 1 G ohm * Dielectric strength: 1500 V dc * Rated current: 7.5 A * AWG: 2.5 mm²/14 AWG * Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles * Insertion / withdrawal force: = 20 N * Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating * Shell (male): stainless steel and zinc diecasting combined. * Insert: PA 6.6 30% GR (glass reinforced) * Contacts: CuSn6 * Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard alloy over 2 ?m Ni * Latch lock (female): St3K32 * Strain-relief clamp: POM * Antikink bushing: PUR * Sealing jacket: EPDM
Environmental Specifications:
* Temperature range: -30° C to + 80° C * Flammability: UL 94HB * Solderability: complies with IEC 68-2-20 * Protection class: IP 65 * Compatibility: IEC 61076-2-103 standard
|
Reviews
There are no reviews yet.