| Price | €13.26 Original price was: €13.26.€11.93Current price is: €11.93. incl. GR VAT | €9.05 Original price was: €9.05.€8.15Current price is: €8.15. incl. GR VAT | €9.92 Original price was: €9.92.€8.92Current price is: €8.92. incl. GR VAT | €8.06 Original price was: €8.06.€7.25Current price is: €7.25. incl. GR VAT | €16.39 Original price was: €16.39.€11.57Current price is: €11.57. incl. GR VAT | €16.12 Original price was: €16.12.€14.50Current price is: €14.50. incl. GR VAT |
| Content |
6 pole female cable connector with Nickel housing and silver contacts. The "industry standard" XLR cable connector, easy to assemble with only 4 parts and no screws. Compact design with sturdy diecast shell, fibreglass reinforced hard plastic insert and chuck type strain relief for secure clamping of all cables. - Rugged zinc diecast shell, long lasting and durable
- Chuck type strain relief system for secure clamping of cables
- Boot with rubber gland gives high protection against bending stresses
- Coloured rings and boots available for coding and marking
- UL recognized components
| B-NE5MX - XLR male extension 5pin
NC5MX |
B-NE5-MPD - XLR chassis male 5pin D-type | These compact, low profile, right angle cable connectors are designed to select
any of 7 positions in 45° increments by rotating the assembled insert into various
indents before securing the back cover. Connector type: XLR male. Shell: Nickel.
Contacts: Silver. Mfg. #NC3MRX. |
Female heavy duty, metal boot with rubber jacket, water protected, IP65.
Electrical Specifications:
* Number of contacts: 5
* Contact resistance: = 3 m ohm
* Insulation resistance, initial: > 2 G ohm; after damp
heat test: > 1 G ohm
* Dielectric strength: 1500 V dc
* Rated current: 7.5 A
* AWG: 2.5 mm²/14 AWG
* Capacitance between contacts: = 4pF
Mechanical Specifications:
* Lifetime: >1000 cycles
* Insertion / withdrawal force: = 20 N
* Cable O.D. range: 3.5 mm - 8.0 mm
Material Specifications:
* Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
* Shell (male): stainless steel and zinc diecasting combined.
* Insert: PA 6.6 30% GR (glass reinforced)
* Contacts: CuSn6
* Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
* Latch lock (female): St3K32
* Strain-relief clamp: POM
* Antikink bushing: PUR
* Sealing jacket: EPDM
Environmental Specifications:
* Temperature range: -30° C to + 80° C
* Flammability: UL 94HB
* Solderability: complies with IEC 68-2-20
* Protection class: IP 65
* Compatibility: IEC 61076-2-103 standard
| XLR Cable Connectors / FXS Type
FX connector with noiseless ON-OFF switch short-circuiting contacts 2+3.
For use with a microphone without switch.
TECHNICAL DATA
Electrical
Number of contacts: 3
Contact resistance: ? 3 m
Insulation resistance - initial: > 2 G
- after damp heat test: > 1 G
Dielectric strength: 1500 V dc
Rated current: 16 A
AWG: 2.5 mm²/14 AWG
Capacitance between contacts: ? 4pF
Mechanical
Lifetime: >1000 cycles
Insertion / withdrawal force: ? 20 N
Cable O.D. range: 3.5 mm - 8.0 mm
Materials
Shell: ZnAl4Cu1, gal Ni or black Cr over Cu plating
Insert: PA 6.6 30% GR (glass reinforced)
Contacts: - female: CuSn6
- male: CuZn39Pb3
Contact surface: gal 2 ?m Ag or gal 0.2 ?m Au hard
alloy over 2 ?m Ni
Latch lock (female): St3K32
Strain-relief clamp: POM
Antikink bushing: PUR
Environmental
Temperature range: -30° C to + 80° C
Flammability: UL 94HB
Solderability: complies with IEC 68-2-20
Compatibility:
IEC 61076-2-103 standard |
Reviews
There are no reviews yet.