| Content | Professional high torque direct drive turntable
- Full-size platter with high-torque direct-drive motor
- 2-speed design: 33 1/3 and 45 RPM
- S-shaped tonearm for accurate tracking
- Tonearm with height adjustment, damped cueing and anti-skate control
- Pitch range adjustable to ±8%, ±16%, and ±50%
- Adjustable counterweight for perfect tonearm balance
- Pitch fader with reset button
- Start and stop time knobs for adjustable time ramping
- 45 RPM adapter included
Turntable platter: die-cast aluminum
Drive Method: Quartz Servo Direct Drive
Motor: 3-phase brushless DC motor
Starting Torque: 4 kgf-cm
Pitch Range: +/- 8%, 16%, 50%
Speed: 33 1/3 RPM, 45 RPM
Wow and flutter: |
Cardan bearing with zero-mass tracking force setting by a
high-precision torsion spring.
Removable headshell with 1/2 inch fixing holes. Adjustable
tracking force and anti-skating.
Headshell made of carbon fiber for special rigid torsion.
Chassis technology
Solid wooden console. Floating sub-chassis.Vibration
-damped aluminum turntables with anti-static felt mat.
Drive technology
Belt drive with smooth flat belt. DC motor with electronic rotary speed control. Viscosity-damped tone
arm lift. Automatic tone-arm cueing mechanism. Auto stop with ton arm return. Possibilities to play-back
archived discs with a rotational speed of 78 Upm.
Delivered with magnetic pick-up OMB 10. |
- Die-cast aluminum platter
- 2 speeds: 33 rpm and 45 rpm
- DC servo-controlled motor
- Automatic placement of the pick-up arm
- Auto stop at the end of the record with auto-return
- Pre-set stylus force
- Με προ ρυθμισμένο Βάρος Ανάγνωσης και antiskating.
- Damped tone arm lift
- Magnetic-cartridge AT 3600L
- Built-in, switchable phono preamplifier for connection to a phono
- or AUX input
- USB port
- headshell: AT 3600L
- Includes: removable hinged dust cover, mat, 45 RPM adapter, USB cable, user manual.
|
| Speed |
33, 45 (manual speed change) |
| Principle |
Belt drive |
| Speed variance |
33: 0.60% 45: 0.50% |
| Wow & Flutter |
33: 0.19% 45: 0.17% |
| Platter |
300 mm glas with felt mat |
| Main bearing |
Brass with teflon plate |
| Tonearm |
8.6” aluminium |
| Effective arm length |
218.5 mm |
| Output voltage at 1000 Hz, 5cm/sec |
5 mV |
| Frequency response |
20-20.000 Hz ± 1.5 dB |
| Stylus type |
Spherical |
| Internal inductance |
450 mH |
| Recommended load restistance |
47 kOhm |
| Recommended load capacitance |
200-500 pF |
| Catridge weight |
19g |
| Overhang |
18.5 mm |
| Effective tonearm mass |
6.0 g |
| Counterweight for mass |
2 - 5.0 g |
| Tracking force, recommended |
1,75g (17,5mN) |
| Power consumption |
4.5 Watt max |
| Dimensions |
500 x 120 x 400 mm (WxHxD) |
| Weight |
4.5 kg net |
| Whether you’re just getting into records, rediscovering a record collection long since buried away or simply adding a turntable to complete your system, the AT-LP60X fully automatic belt-drive turntable is an excellent choice. This affordable, easy-to-use turntable plays both 33-1/3 and 45 RPM records and, with its built-in switchable phono preamp, can be connected directly to your home stereo, powered speakers, computer and other components, whether they have a dedicated phono input or not.
An update of the popular AT-LP60, the ATLP60X features a redesigned tonearm base and headshell to improve tracking and reduce resonance. Noise is further reduced by the inclusion of an AC adapter that moves the AC/DC conversion outside of the chassis where its impact on the signal chain is limited.
Audio-Technica has been a leader in phono cartridge design for more than 50 years, and that expertise shows in the AT-LP60X’s Dual Magnet™ cartridge with replaceable stylus. The cartridge is integrated into the headshell for assured performance and ease of setup.
The turntable comes with a detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and a removable hinged dust cover. It is available in black (AT-LP60X-BK), brown/black (AT-LP60X-BW), gunmetal/black (AT-LP60X-GM), and red/black (AT-LP60X-RD).
-
- Experience the high-fidelity audio of vinyl
-
- Fully automatic belt-drive turntable operation with two speeds: 33-1/3, 45 RPM
-
- Anti-resonance, die-cast aluminum platter
-
- Redesigned tonearm base and headshell for improved tracking and reduced resonance
-
- Integral Dual Magnet™ phono cartridge with replaceable diamond stylus (ATN3600L)
-
- AC adapter handles AC/DC conversion outside of the chassis, reducing noise in the signal chain
-
- Built-in switchable phono pre-amplifier for phono- or line-level output
-
- Includes: detachable RCA output cable (3.5 mm male to dual RCA male), 45 RPM adapter, and removable hinged dust cover
- Available in black (AT-LP60X-BK), brown/black (AT-LP60X-BW), gunmetal/black (AT-LP60X-GM), and red/black (AT-LP60X-RD)
AC adapter: 12 V, 2 A
Replacement Stylus: ATN3600L
| Type |
Belt drive turntable, fully automatic |
| Motor |
DC servo-controlled |
| Speeds |
33-1/3 RPM, 45 RPM |
| Turntable Platter |
Aluminum |
| Wow and Flutter |
Less than 0.25% (WTD) @ 3 kHz |
| Signal-to-Noise Ratio |
>50 dB (DIN-B) |
| Output Level |
Pre-amp "PHONO”: 2.5 mV nominal at 1 kHz, 5 cm/sec
Pre-amp "LINE” 150 mV nominal at 1 kHz, 5 cm/sec |
| Phono Pre-Amp Gain |
36 dB nominal, RIAA equalized |
| Power Supply Requirements |
100 to 240 V, 50/60 Hz, 0.6 A Max. |
| Power Consumption |
1.0 W |
| Dimensions |
359.5 mm (14.15“) W x 97.5 mm (3.84“) H x 373.3 mm (14.70“) D |
| Weight |
2.6 kg (5.73 lbs) |
| Accessories Included |
Dust cover, Felt mat, Platter (with drive belt), 45 RPM adapter, RCA audio cable (approx. 1.2 m (3.9\')), AC adapter (approx. 1.5 m (4.9\')) |
|
| Motor: |
|
| Drive: |
Belt |
| Speed settings |
33/45/78 |
| Wow & Flutter |
< ±0,08 % (DIN WTD) |
| Tonearm: |
|
| Auto-Start/-Stop-Function: |
Automatic |
| Bearing: |
Ball-bearing |
| Effective length: |
221,5 mm |
| Offset Angle: |
25,6° |
| Overhang: |
19 mm |
| Type: |
statically balanced |
| Stylus Pressure Range: |
0 g bis 4 g |
| Cartridge Weight Range: |
5 g bis 9 g |
| Factory installed pick up: |
Ortofon 2M Red |
| Platter |
|
| Material: |
Aluminium die-cast |
| Mat: |
Rubber 2,5 mm |
| Bearing: |
Hardened steel spindle Brass bushing |
| Diameter: |
305 mm |
| Weight (incl. Mat): |
850 g |
| Plinth: |
|
| Material: |
MDF, folded |
| Surface finish: |
Vinyl veneer / Black |
| Feet: |
Ø 62 mm / Elastomer |
| Connection: |
RCA socket |
| Connection to Phono Input: |
✓ |
| Connection to Line Input: |
✓ |
| Digital Output: |
✕ |
| Dimension, closed dustcover: |
435 x 367 x 145 mm |
| Dimension, open dustcover: |
D: 415 mm / H: 400 mm |
| Weight: |
6,2 KG |
| Power plug AC / DC: |
External power supply |
|
Reviews
There are no reviews yet.