ONKYO TX-8220-S Stereo AMP 100W / Channel, 6Ohm, Phono Input, BLUETOOTH, Silver

Add Dynamic Hi-Fi Sound to Your Entertainment Mix

Delivering 110 W/Ch of high-current power from a fully discrete low-impedance amplification system, the TX-8130 plays your audio sources with dynamic energy and pure musicality. Custom-spec components are used throughout, from high-current EI transformer, twin 8,200 μF capacitors, and rigid oval chassis to the 384 kHz/32-bit DAC that decodes Hi-Res 192/24 and 5.6 MHz DSD files streamed over the network.

Whether enjoying Spotify, Deezer, or TuneIn Radio (with song selection handled via remote app) or kicking back with a stack of LPs, listeners are rewarded with lush, detailed, and deeply satisfying sound that few amps at this price can equal. Other details such as BGM presets for one-touch playback of AM/FM/Internet Radio stations, generous analog/digital connectivity, and rock-solid build will confirm your impression of quality, value, and versatility.

HIGHLIGHTS

• 100 W/Ch Hi-Current Amplification System
• Bluetooth® Audio Streaming Technology for Almost Any Device
• DAB+ and FM/RDS Radio Tuners with 40 Station Presets
• MM Phono, Analog, and Digital Audio Inputs
• Hi-Current Discrete Amplification System

ADVANCED FEATURES

• 100 W/Ch Stereo Power (6 Ω, 1 kHz, 10%, 1 Channel Driven, IEC)
• Stream from Mobiles, Smartphones, Tablets, Laptops, and PC via Bluetooth Version 4.1 (A2DP/AVRCP)
• with Bluetooth Standby and Auto Connect Functions
• DAB+ and FM/RDS Radio Tuners with 40-Station Memory Presets
• Radio Station Preset Naming (Up to 8 Characters)
• WRAT (Wide Range Amplifier Technology) with Massive Hi-Current EI Transformer,
• Custom Power Capacitors, and Low Impedance Drive
• Non-Phase-Shift Amp Circuitry with Discrete Power Transistors
• Optimum Gain Volume Circuitry
• 192 kHz/24-bit* (PCM1754) Digital-to-Analog Converter
• Direct Mode for Source-Authentic Audio Reproduction

* 96 kHz/24-bit D/A conversion

CONNECTION FEATURES

• 2 Digital Audio Inputs (1 Optical and 1 Coaxial)
• 4 Analog RCA Inputs and 1 Line Output
• Phono Input with MM Equalizer
• Subwoofer Pre-Out
• Two Pairs of Speaker Posts with Screw Knobs
• 6.35 mm Headphone Jack

           Dimensions (W x H x D) 435 x 149 x 328 mm

           Weight 7.0 kg

           CARTON Dimensions (W x H x D) 533 x 234 x 401 mm

           Weight 8.8 kg

The 851W has class XD amplification at 200W into 8 Ohms in stereo mode or 500W RMS per amp in mono bridged mode, separate toroidal transformers for the power amp and input/other circuitry, and terrapin impedance buffering modules. All in all it\'s the best sounding amplifier we have ever made.

         Our proprietary Class XD amplification
        Separate toroidal transformers for power amp and input/other circuitry
        Our bespoke Terrapin impedance buffering modules – separating amplifier and signal impedance
        200W into 8 Ohms stereo mode or 500W RMS per amp mono bridged mode
        CAP5 protection from DC spikes, overheating and clipping
                All metal chassis with premium components
        Remote Control – Compatible with the entire 851 range

 Power output – stereo/mono    200W per channel into 8 Ohms
350W per channel into 4 Ohms
Power output – bridged mono    500W 8 Ohms
800W 4 Ohms
THD (unweighted)    < 0.001% 1 kHz
< 0.005% 20 Hz - 20 kHz
Frequency response    5Hz – 80kHz
S/N ratio (ref 1W / 8 Ohn)    >90dB (unweighted)
Sensitivity – stereo or mono    1.5V rms unbalanced
1.5 + 1.5V rms balanced
Sensitivity – bridged mono    0.775V rms unbalanced
0.775V + 0.775V rms balanced
Input impedances    Balanced input 38 kOhm
Unbalanced input 68 kOhm
Power amp damping factor    > 110 at 1 kHz
Max. power consumption    2400W
Standby power consumption    Standby

Ti 120 SIGN.
Special power and output transformer
from BHS uk and Mundof M-Cap
signal capasitors
Integrated tube amp.Four line inputs.
2X12AU7, 4x KT 88, 2x12AX7
2x6SN7 75 Wrms per chan.4-8 ohm.
Class AB push-pull.Remote control inc.
Negative feedback on/of switch.

High rigidity metal frame
Shielded high current power supply
• 500VA toroidal transformer
• 80.000uF capacitor bank
• Rubber insulated aluminium feet
• WBT connector on unbalanced input
• Neutrik connector on balanced input
• Fully discrete analogue design
• Onsemi MJL1302/3281 power transistor
• Low overall feedback
• High stability on capacitive loads
• White Gold cable on output connection
• 100W/8Ohm power unit and double the
power on 4 Ohm until 390W on 2Ohm; a
big power reserve that allows to drive any loudspeakers even in a big room.

Class XD™ amplification designed to eliminate crossover distortion at low signal levels
New balanced volume topology controllable in 1dB steps, giving very fine control, and superbly accurate channel balance
Audiophile grade oversize toroidal transformer and substantial extruded heatsink allowing 2 x 120 Watts RMS into 8 Ohms or 2 x 200W into 4 ohms.
Separate transformer taps for left and right channels, twin rectifiers and separate PSUs for dual mono operation of the left and right power amplifiers
A separate toroidal transformer supplies the preamp making the 851A effectively a Pre and Power amp combination in one box
CAP5 protection technology for trouble free operation
Acoustically damped full metal chassis with thick brushed aluminium front panel
Customisable front panel display
Balanced and unbalanced analogue audio inputs for superior connectivity
RS232 controllable
Eco-friendly Available in black and silver finishes

Τi 60 tube
Integrated tube amp.Four line inputs.
2X12AU7, 4x EL34, 1x12AX7
35 Wrms per chan.4-8 ohm.
Class AB push-pull
Remote control included.