Content |
Ortofon OM10 Stylus replacement. A slip on replacement stylus assembly for all cartridges in the Ortofon OM range. Can be used to replace the stylus on the OM10 or to upgrade OM5e to an OM10.
Specification
Output voltage at 1000 Hz, 5cm/sec.
|
4 mV
|
Channel balance at 1 kHz
|
1.5 dB
|
Channel separation at 1 kHz
|
22 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range
|
20-24,000 Hz
|
Frequency response
|
20-20,000 Hz + 3 / - 1 dB
|
FIM distortion at recommended tracking force, DIN 45.542
|
|
Tracking ability at 315Hz at recommended tracking force
|
70 µm
|
Compliance, dynamic, lateral
|
25 µm/mN
|
Stylus type
|
Elliptical
|
Stylus tip radius
|
r/R 8/18 µm
|
Equivalent stylus tip mass
|
0.5 mg
|
Tracking force range
|
1.25-1.75 g (12.5-17.5 mN)
|
Tracking force, recommended
|
1.5 g (15 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1 kOhm
|
Internal inductance
|
580 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge colour, body/stylus
|
Black/Black
|
Cartridge weight
|
5 g
|
Replacement stylus unit
|
Stylus 10
|
| DJ E Replacement stylus
Basic model for scratch and back-cueing. Outstanding rigidity by extra-strengthened cantilever
Features Special Elliptical stylus and a special developed and extremely balanced cantilever.
Not only does the cartridge have a most sufficient tracking ability, it is also nearly unbreakable and provides the DJs with the most needed stringency. Furthermore, it equals very low record wear, an advantage for busy DJ.
The DJ series has been known to many as the "jack of all trades," with improved tracking, alongside of accurate sound reproduction. Featuring a low wear stylus design, the DJ provides excellent groove handling, even with less weight applied.
DJ E Stylus Technical data
Output voltage at 1000Hz, 5cm/sec. - 6 mV
Channel balance at 1kHz - 2 dB
Channel separation at 1kHz - 23 dB
Channel separation at 15 kHz - 15 dB
Frequency range at -3dB - 20-22.000 Hz
Frequency response - 20-20.000 Hz +/-2 dB
Tracking ability at 315 Hz at recommmende tracking force - 80 μm
Compliance, dynamic lateral - 9 μm/m N
Stylus type - Special Elliptical
Stylus tip radius - r/R 13/25 μm
Tracking force range - 2,0-4,0 g (20-40 mN)
Tracking force recommended - 3,0 g (30 mN)
Tracking angle - 20°
Internal impedance, DC resistance - 750 Ohm
Internal inductance - 450 mH
Recommended load resistance - 47 kOhm
Recommended load capacitance - 200-600 pF
Cartridge weight - 18,5 g
Compatible with cartridges - DJ S | Stylus 5E
Technical data |
|
Frequency range |
20-25.000 Hz |
Frequency response |
20-25.000 Hz |
Tracking ability at 315Hz at recommended tracking force *) |
|
|
Stylus 78
Technical data |
| Frequency range | 20-15.000 Hz | Frequency response | 20-12.000 Hz + 2 / - 3 dB | Tracking ability at 315Hz at recommended tracking force *) | 60 µm | Compliance, dynamic, lateral | 15 µm/mN | Stylus type | spherical
| Stylus tip radius | 65µm | Equivalent stylus tip mass | 0,5 mg | Tracking force range | 1,75-2,25 g (17,5-22,5 mN) | Tracking force, recommended | 2,0 g (20 mN) | Tracking angle | 20° | Stylus colour | Black |
| | Recommended for following cartridges |
All Super OM, OM, OMP, TM, Concorde cartridges for playing 78 r.p.m. records
| *) Typical value | Stylus 2M Red
Technical data |
|
Frequency range |
20-22.000 Hz |
Frequency response |
20-20.000 Hz + 3 / - 1 dB |
Tracking ability at 315Hz at recommended tracking force *) |
70 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,6-2,0 g (16-20 mN) |
Tracking force, recommended |
1,8 g (18 mN) |
Tracking angle |
20° |
Stylus colour |
Red |
|
|
Recommended for following cartridges |
2M Red |
*) Typical value |
Ortofon 530MKII Stylus Technical Data
Frequency range 20-25.000 Hz
Frequency response 20-20.000 Hz + 2 / - 3 dB
Tracking ability at 315Hz at recommended tracking force 80 µm
Compliance, dynamic, lateral 30 µm/mN
Stylus type Nude Fine Line
Stylus tip radius r/R 8/40 µm
Equivalent stylus tip mass 0,3 mg
Tracking force range 1,25-1,75 g (12,5-17,5 mN)
Tracking force, recommended 1,75 g (17,5 mN)
Tracking angle 20°
Stylus colour Black
Recommended for following cartridges Series 530 Mkll, 530, 530 P |
|
Reviews
There are no reviews yet.