Content |
Ortofon OM10 Stylus replacement. A slip on replacement stylus assembly for all cartridges in the Ortofon OM range. Can be used to replace the stylus on the OM10 or to upgrade OM5e to an OM10.
Specification
Output voltage at 1000 Hz, 5cm/sec.
|
4 mV
|
Channel balance at 1 kHz
|
1.5 dB
|
Channel separation at 1 kHz
|
22 dB
|
Channel separation at 15 kHz
|
15 dB
|
Frequency range
|
20-24,000 Hz
|
Frequency response
|
20-20,000 Hz + 3 / - 1 dB
|
FIM distortion at recommended tracking force, DIN 45.542
|
|
Tracking ability at 315Hz at recommended tracking force
|
70 µm
|
Compliance, dynamic, lateral
|
25 µm/mN
|
Stylus type
|
Elliptical
|
Stylus tip radius
|
r/R 8/18 µm
|
Equivalent stylus tip mass
|
0.5 mg
|
Tracking force range
|
1.25-1.75 g (12.5-17.5 mN)
|
Tracking force, recommended
|
1.5 g (15 mN)
|
Tracking angle
|
20°
|
Internal impedance, DC resistance
|
1 kOhm
|
Internal inductance
|
580 mH
|
Recommended load resistance
|
47 kOhm
|
Recommended load capacitance
|
200-400 pF
|
Cartridge colour, body/stylus
|
Black/Black
|
Cartridge weight
|
5 g
|
Replacement stylus unit
|
Stylus 10
|
| Stylus 3E
Technical data |
|
Frequency range |
20-20.000 Hz |
Frequency response |
20-18.000 Hz + 2 / - 3 dB |
Tracking ability at 315Hz at recommended tracking force *) |
60 µm |
Compliance, dynamic, lateral |
20 µm/mN |
Stylus type |
Elliptical |
Stylus tip radius |
r/R 8/18 µm |
Equivalent stylus tip mass |
0,5 mg |
Tracking force range |
1,5-2,0 g (15-20 mN) |
Tracking force, recommended |
1,75 g (17,5 mN) |
Tracking angle |
20° |
Stylus colour |
Black |
|
|
Recommended for following cartridges |
OM 3E, OMP 3E |
*) Typical value | Ortofon 510MKII Stylus Technical Data
- Frequency range20-23.000 Hz
- Frequency response20-20.000 Hz + 2 / - 3 dB
- Tracking ability at 315Hz at recommended tracking force70 µm
- Compliance, dynamic, lateral25 µm/mN
- Stylus typeElliptical
- Stylus tip radiusr/R 8/18 µm
- Equivalent stylus tip mass0,3 mg
- Tracking force range1,25-1,75 g (12,5-17,5 mN)
- Tracking force, recommended1,5 g (15 mN)
- Tracking angle20°
- Stylus colourBlack
- Recommended for following cartridgesSeries 510 Mkll, 510, 510 P
|
|
Technical data |
|
Frequency range |
20-29.000 Hz |
Frequency response |
20-20.000 Hz + 2 / -0 dB |
Tracking ability at 315Hz at recommended tracking force *) |
80 µm |
Compliance, dynamic, lateral |
22 µm/mN |
Stylus type |
Nude Fine Line |
Stylus tip radius |
r/R 8/40 µm |
Tracking force range |
1,4-1,7 g (14-17 mN) |
Tracking force, recommended |
1,5 g (15,0 mN) |
Tracking angle |
20° |
Stylus colour |
Bronze |
|
|
Recommended for following cartridges |
2M BRONZE |
|
Stylus 10
Genuine Original Stylus for OM 10, OM 10 Super, OMP10, LM 10, Concorde 10, TM 10H
Elliptical
Interchangeability/Upgrade Group: A
| Replacement stylus for the CC-1 Cartridge.
* Frequency response: 20 to 22,000Hz
* Output: 6mV
* Channel separation nominal: 28dB
* DC resistance: 430 ohms/ch
* Inductance: 400mH/ch
* Weight: 18.0g
* Channel balance: within 1.5dB
* Tracking force: 3–6g
* Recommended load: 47K ohms 200pf
* Stylus tip: fine circular diamond
* Application: high versatility and skip resistance |
Reviews
There are no reviews yet.