| Content |
- Wide range of authentic tube amplifier tones
- Selectable amplifier styles, gain structure and mic position emulation
- Master drive, level, bass and treble controls
- Superior signal-to-noise ratio
- Ideal for direct recording
- Doubles as distortion pedal, practice amp and DI box
- Pure analog device
In its new incarnation, the Palmer Pocket Amp MK 2 delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier design, gain structure and loudspeaker miking simulation the MK 2\'s hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. For even more flexibility the Pocket Amp MK 2 sports master controls for drive and output level plus a 2-band EQ that has been carefully tailored for guitar applications.
Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
Product type
Guitar Amplifiers
Technology
solid state
Power
n.a. W
Inputs
1
Input connectors
6.3 mm jack
Input impedance
1 M Ohm(s)
Outputs
3
Output connectors
3.5 mm jack , 6.3 mm jack , XLR
Output impedance
510 Ohm(s)
Channels
1
Indicators
on/off
Controls
amp select , Bass , Drive , Gain , ground lift , level , mic position , Mode , Treble
FX loop
no
Operating voltage
9 V block , 9 V DC power supply
Cabinet material
die-cast aluminium
Width
100 mm
Depth
100 mm
Height
55 mm
Weight
0,36 kg |
The Digitech XHP HYPER PHASE Guitar Effect Stomp Box Pedal. Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds.
The Digitech XHP Hyper Phase delivers 7 operational modes, instead of the typical one mode only that you find in some other pedals. These operational modes are easily selectable using the mode control allowing you to choose from a selection of awesome voicing sounds, triggering feature, and useful step functions. Now you are no longer limited to a one-trick pedal. You can dial in the exact phaser or flanger sound you want! The Hyper Phase has Speed, Depth, Regen, and Mode controls. Outputs for both pedals include Out 1 (Mono) and Out 2 for stereo operation.
The main features of the Digitech XHP HYPER PHASE include:
- Dial in the exact phaser or flanger sound you want from a selection of awesome voicing sounds
- 7 Different phase types
- Speed, Depth, Regen, and Mode controls
- Triggering and step capability
- Stereo outputs with switchable CIT Cabinet Modeling
| Building on the 20-year legacy of the famous BOSS BF-2, the new BF-3 flanger pedal gives guitarists and bassists an updated version of the classic BOSS flanger with the thickest stereo flanging sounds ever. Two new modes (Ultra and Gate/Pan) create stereo flanging with incredible depth--even Slicer-type effects and sounds that seem to "swirl" around the listener. An instant classic.
- BOSS' best flanging effects in a compact pedal
- New Ultra and Gate/Pan modes for ultra-fat flanging and futuristic slicer-type sounds, respectively
- Momentary mode turns flanging on instantly
- Tap tempo adjustable via pedal
- Independent Guitar and Bass inputs and stereo outputs
- BOSS 5-year warranty
|
Produces everything from mild, natural chorusing to the penetrating stereo chorus popular in contemporary music. Covers a wide frequency range and includes both high- and low-cut filters.
| Input Impedance | 1 M ohms |
|---|
| Output Impedance | 1 k ohms |
|---|
| Recommended Load Impedance | 10 k ohms or greater |
|---|
| Residual Noise Level | -93 dBu (IHF-A, Typ.) |
|---|
| Connectors | INPUT Jack, OUTPUT Jack A (mono)/ B, AC Adaptor Jack (DC 9 V) |
|---|
| Power Supply | DC 9 V: Dry Battery 9 V type (6F22/9 V), AC Adaptor |
|---|
| Current Draw | 22 mA (DC 9 V) |
|---|
| Accessories | Dry Battery 9 V type (6F22/9 V) |
|---|
| Option | AC Adaptor (PSA-Series) |
|---|
| Size and Weight ( incl. battery ) |
|---|
| Width | |
|---|
| Depth | |
|---|
| Height | |
|---|
| Weight | |
|---|
|
VINTAGE TUBE OVERDRIVE TO800
What's bright green and goes from 1 to 11 as fast as you can step on the “On” switch? It’s the very essence of rock ‘n’ roll, our screaming-hot VINTAGE TUBE OVERDRIVE TO800 effects pedal! The classic sound of blazing, overdriven vacuum tubes never goes out of style, and they’re at your command – when you have the VINTAGE TUBE OVERDRIVE TO800 in your effects chain
Vintage Tube-Like Tone
In order to recreate the sound of real-tube crunch, we put the original 4558 op amps and legendary MA150 distortion diodes in the TO800, putting rock’s most powerful overdrive sounds at your disposal. The resulting output is extremely faithful to that of the vintage tone machines that made rock and roll history.
Ease of Use
Dedicated Drive, Tone and Level controls let you shape the exact sound you want. The status LED tells you when this pedal is activated, and the top-quality on/off switch provides the highest signal integrity in bypass mode. You can power the TO800 via a 9 V battery or our PSU-SB DC power supply (not included).
- Get vintage overdrive, smooth sustain and screaming fat tone
- Perfect for guitar; great for bass and keyboards, too
- Uses original 4558 IC plus MA150 distortion diodes for authentic vintage sound
- Captures every nuance of your playing from smooth overdrive to screaming tube sounds
- Dedicated Drive, Tone and Level controls for awesome sound shaping
- Status LED for effect on/off and battery check
- Runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included)
- Rugged electronic On/Off switch for noise-free operation
| The V845 Wah-Wah pedal is a new version of the most famous guitar effects pedal of all time. Based on the specifications of the original pedal developed by VOX in the '60s, the V845 Wah-Wah offers guitarists the same legendary Wah-Wah tone in a new sturdy but very affordable design. An AC power connector is fitted to save on batteries and the outer case is coated with tough all-black finish making it the perfect choice for your pedal board.
About the VOX Wah-Wah
VOX developed the worldʼs first Wah-Wah effect during the '60s in an effort to allow guitarists to emulate the sound of a trumpet being muted — an important musical ingredient of the day. VOXʼs original Wah-Wah pedal quickly gained widespread popularity and its unique sonic characteristics have encouraged further experimentation by guitarists ever since. Having made spotlight appearances on some of the most famous recordings of all time, the Wah-Wah is still considered "must-have equipment” for guitar players of all levels and abilities today.
VOX V845 Wah-Wah Specifications
- Input/Output jacks: INST jack, AMP jack, DC i/p jack.
- Power supply: One 9V DC battery 6F22(S-006P)
- Power consumption: 540uA @ 9VDC
- Battery life for continuous use: approximately >100 hours with manganese battery (will vary depending on conditions)
- Dimensions: 102(W) x 252(D) x 75(H) (including rubber feet, pedal in lowest position)
- Weight: 942g (including battery)
|
Reviews
There are no reviews yet.