PALMER PHDA02 Pro PHDA 02 – Reference Class Headphone Amplifier – 1-channel

353.91 incl. GR VAT

Available on backorder

EAN: 4049521090677
Installments calculation
CompareAdd to wishlist Submit Better Price
The PHDA02 – a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes. In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono […]

 

Read more

The PHDA02 – a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers’ discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

 

 

Weight 1.58 kg

Reviews

There are no reviews yet.

Be the first to review “PALMER PHDA02 Pro PHDA 02 – Reference Class Headphone Amplifier – 1-channel”

Your email address will not be published. Required fields are marked *

Quick Comparison

PALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeOMNITRONIC LH-030 4xHEADPHONE AMPLIFIER removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier removeVOX AMPLUG JOE SATRIANI Guitar Headphone Amp remove
NamePALMER PHDA02 Pro PHDA 02 - Reference Class Headphone Amplifier - 1-channel removeKRAMER VM-50H 1:5 Stereo Headphone Distribution Amplifier removeAPOGEE GROOVE HEADPHONES AMP , USB DAC removeOMNITRONIC LH-030 4xHEADPHONE AMPLIFIER removeBEHRINGER MA400 Ultra-Compact Monitor Headphone Amplifier removeVOX AMPLUG JOE SATRIANI Guitar Headphone Amp remove
Image
SKUPHDA02VM-50HGROOVELH030E005310VOX AMPLUG JOE SATRIANI
Rating
Price 353.91 incl. GR VAT 264.66 incl. GR VAT 271.56 incl. GR VAT 63.24 incl. GR VAT 31.00 incl. GR VAT 36.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

In stock

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)In stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The PHDA02 - a reference class headphone amplifier with Stereo, Mono, and Dual Mono operation modes.

In Stereo mode, the L/R input signal is fed to the left and right earphones while the volume level is set by the Stereo/Left control. The front panel inputs provide simultaneous connection of two headphones in parallel. In Mono mode, the left and right channels are summed, and the resulting mono signal is fed to both the left and right earphones. Again, volume is governed by the Stereo/Left control. In Dual Mono mode, the left and right channels can be used independently with individual level controls for the left and right earphones.

The PHDA02 operates with all headphones with an impedance of 8 up to 200 Ohms. Impedance matching is achieved by a specially designed switchable transformer. Uncommon and costly, this solution provides superior performance, dynamic range, and signal-to-noise ratio at all loads.

Combo input sockets allow for balanced XLR and unbalanced TS headphone connection while parallel XLR outputs facilitate daisy chaining multiple units. The integrated power supply operates with mains from 100 VAC to 240 VAC.

The PHDA02 is equipped with low-noise op amps, and the output amplifiers' discrete power transistors are mounted on heatsinks. Dimensions are 1 U 9.5“.

 

 

INPUT:    1 audio stereo, 1Vpp/50kΩ on a 6.5mm stereo phone socket.
OUTPUTS:    5 audio stereo, 500mW/8Ω on 6.5mm stereo phone sockets.
AUDIO BANDWIDTH (-3dB):    25kHz.
CONTROL:    5 stereo output level controls (front), 1 mono switch (rear).
GAIN RANGE:    -60dB to +10dB.
S/N RATIO:    78dB.
THD:    0.08% @100mW.
POWER SOURCE:    12V DC, 370mA nom, 1A max.
DIMENSIONS:    16.5cm x 12cm x 4.5cm (6.5” x 4.72” x 1.77”) W, D, H.
WEIGHT:    0.68kg (1.5lbs) approx.
ACCESSORIES:    12V DC power supply.
OPTIONS:    RK-1 19" rack adapter.

Info

Apogee Groove is the best portable USB DAC and headphone amp for listening to music on your Mac or PC. Groove takes the same high quality audio technology found in the worldʼs most prestigious recording studios and delivers it to your laptop. Connect Groove directly to your computer and connect your headphones or powered speakers directly to Groove. Itʼs that easy. Youʼll be amazed by the difference in sound quality. Highlights: USB 2.0 connection to Mac and PC Up to 24 bit / 192kHz audio ESS Sabre DAC Constant Current Drive?, Ultra-smooth frequency response for any headphones Quad Sum DAC?, 4 DACs per channel for highest dynamic range and lowest distortion Asynchronous clocking Max output level: 225mW into 30 Ohm Multi-color LEDs for status and level indication Powered by USB Top panel buttons for adjusting output level and muting Compact and portable (95mm H x 30mm W x 16mm T) Premium aluminum build quality Built in the USA Pricing to be announced

  • Distributes the signal of 1 audio source to 4 sets of headphones
  • 4 channels with separate level controls and headphone outputs
  • All connections via 6.3 mm (1/4“) jacks
  • Operation via supplied power unit

  • Ultra-compact monitor headphone amplifier for studio and stage applications
  • Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
  • Flexible Mic In and Mic Through connectors plus Ground Lift switch
  • Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
  • High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
  • DC 12 Vadapter included
  • 3-Year Warranty Program*
  • Designed and engineered in Germany

Plug In, Rock Out with the Joe Satriani amPlug headphone amp

The Joe Satriani signature model is the latest addition to our incredibly popular amPlug series of headphone guitar amps!

  • Joe's signature lead tone with your choice of delay on or off
  • Distortion tone with superb dynamic response, inspired by the Satchurator
  • Analog-style delay with Joe's filter & EQ, inherited from the Time Machine
  • Plugs straight into your electric guitar, so you can instantly enjoy great sound through your headphones
  • Convenient and portable with up to 11 hours of battery operation
  • AUX input jack lets you jam along to tunes on your CD/MP3 player

The amPlug series of palm-sized headphone guitar amps make it easy to enjoy great guitar/bass sounds at home, in your room, or anywhere. This lineup is now joined by the amPlug Joe Satriani signature model, which borrows freely from the VOX/Joe Satriani line of signature pedal effects.

Specifications
  • Power supply: AAA batteries (x 2)

  • Battery life (FX on):
    Zinc-carbon batteries: approximately 3 hours
    Alkaline batteries: approximately 11 hours

  • Dimensions (W x D x H): 86 x 80 x 31mm/3.39" x 3.15" x 1.22"

  • Weight: 40 g/1.41 oz. (not including batteries)

  • Included items: Two AAA batteries (for verifying operation)

 

Weight1.58 kg0.68 kg1.00 kg0.50 kg0.30 kg0.40 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.58 kg
Weight 0.68 kg
Weight 1.00 kg
Weight 0.50 kg
Weight 0.30 kg
Weight 0.40 kg