Content | Overview
The PVX 12 passive loudspeakers deliver superior sound quality by utilizing advanced materials like its lightweight, roadworthy molded polypropylene exterior. Lightweight, durable and voiced for live music or speech applications, these two-way speaker systems will handle 400 watts program and 800 watts peak power and feature heavy-duty woofers, 2-3/8" voice coils and the Peavey RX14™ 1.4-" titanium diaphragm compression driver coupled to a constant directivity horn.
Features
- 400 watts program
- 800 watts peak
- Top, bottom and right side flying point inserts
- Full-coverage heavy-duty perforated steel grille, with powder-coat finish
- Rugged Construction
- Patented, asymmetrical Quadratic Throat
- Waveguide™ Technology - 100º by 50º coverage. 15º upward and 35º downward directing sound to your audience
- RX14™ - Titanium Compression Driver
- Weight Unpacked: 37.00 lb(16.783 kg)
- Weight Packed: 43.00 lb(19.505 kg)
- Width Packed: 20“(50.8 cm)
- Height Packed: 26.75“(67.945 cm)
- Depth Packed: 18.25“(46.355 cm)
|
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package. It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications. The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability. It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
|
Hχείο 2 δρόμων με ομοαξονική διάταξη των tweeters (array), woofer 12“, tweeter 6 X 0,5“, 300W program, 8Ω, διασπορά 90° X 40°, απόκριση συχνότητας 80Hz-20kHz, 97dBSPL/1W/1M, Καμπίνα πολυπροπυλενίου, weather resistant, μαύρο χρώμα, (361 (W) Χ 448 (H) Χ 320 (D)mm). Βάρος 8,5 Kg. |
Electro-Voice ZX3-60B - 600-Watt, 12” two-way loudspeaker system, bi-amp or passive, 60 X 60 horn, integral stand mount, Neutrik Speakon, Black This item is BLACK. The Electro-Voice ZX3-60B is a 2-way P.A. passive loudspeaker with a 600-watt continuous power handling capacity and a 60x60° coverage angle, for long-throw and cluster applications. The high-tech, high-impact polypropylene enclosure houses a 12" woofer and a 1" Neodymium compression driver with a large 2" voice-coil. The ZX3-60B cabinet is equipped with 10 integral suspension points for permanent suspension or bracketing, and 3 Anchor Plates for single-stud fittings, with an additional pair of Anchor Plate attachment points on the bottom of the speaker. • 2-way 600-watt suspension P.A. speaker with 60x60° coverage for long-throw and cluster applications • High output, 131dB SPL capacity • Adjustable feet allow 45° or 55° speaker placement angle for use as stage monitor • 12" forced-air-cooled woofer, 1" titanium diaphragm compression driver with 2" voice coil • Rugged, high-tech polypropylene enclosure • 3 suspension Anchor Plates, 10 M8 insert suspension points Additional Information on the ZX3-60B
Active or Passive |
Passive |
Frequency Response |
-10dB:48-20,000Hz |
Power Capacity |
600W |
Maximum Sound Pressure Level (SPL) |
131dB |
Nominal Sensitivity |
97dB |
Impedance |
8 Ohms |
Crossover |
2KHz |
Low Frequency Driver |
DVX3121, 12" (305mm) Driver |
High Frequency Driver |
ND2, 1" (25.4mm) exit Neodymium |
Enclosure Material |
Polypropylene Structural Foam |
Input Connections |
Neutrik Speakon NL4\'s x 2 |
Mounting Options |
Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure |
Dimensions |
24.14 x 15.64 x 14.26" (613 x 397 x 362mm) |
Weight |
43.7 lbs (19.8 kg) |
|
With the newly designed D12, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications. With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fi xed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road. For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffl e by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.
Cabinet Full-Range Configuration Passive 2-Way Nominal Impendance 8 ohms Rated power RMS 300 W Program power 600 W Peak power 1200 W SPL 2,83V / 1m (1W/8 ohms) 98 dB Max. SPL 1m (calc. with peak) 129 dB Frequency range (-10dB) 70Hz - 18 kHz Nominal Coverage angle 80° x 40° Passive crossover frequency 1,5 kHz Voice ceil tracking protection Yes Component High ND2 S-8 Component Low DL 12 BFH Connectors 1+/1- Wired through 2+/2- Connector model Speakon 2x NL4 MPR Dimensons (WxHxD) mm 429,5 x 596 x 320,5 Shipping weight 17 kg Net weight 16 kg Enclosure material Polypropylene Finish Black Grille, Steel Powder coated Front b/w Acoustic Foam Handles 1 | Axial Sensitivity 94 dB
Case Material 9-ply, 15mm Plywood, Internally Braced, with Texured Paint
Frequency Response (-3 dB) 82 Hz - 18 k Hz
Frequency Response (-10 dB) 55 Hz - 20 k Hz
Recommended High-Pass Frequency 45 Hz
Max. SPL/1m (calc) 132 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
LF Transducer (1) EVS-12K, 305mm (12”) Woofer
HF Transducer DH-1K, 39mm (1.5”) Titanium Diaphragm Compression Driver
Crossover Frequency 2.1 k Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 7 Ω
Connector Type Dual NL4
Grill 18GA Steel with Black Powdercoat
Height 607 mm (23.9“)
Width 362 mm (14.25“)
Depth 340 mm (13.39“)
Weight Net 15.8 kg (34.83 lbs)
Shipping Weight 20 kg (44.09 lbs) |
Reviews
There are no reviews yet.