| Content | OVERALL
- Total Pieces:2
- Included Accessories:• (1) Wall Mounting Template
• (2) Power Adapters
• (2) Power Cords
• (1) Quick Start Guide
• (1) Registration Card
- Warranty:Yes
- Carton 1:6.34" (16.1 cm) h x 13.46" (34.19 cm) w x 10.35" (26.29 cm) d -
SR1 WIRELESS SURROUND SPEAKERS
- Qty Included:Pair
- Orientation:Horizontal
- Rear Array Driver Complement:• (1) 3" (7.62 cm) d (Round) Left Rear Surround - Mid/Woofer
• (1) 3" (7.62 cm) d (Round) Right Rear Surround - Mid/Woofer
- Mounting Type:-
- Available Orientations:Horizontal
- Mounting Type:1/4 in - 20 Threaded Insert and Keyhole Hanger
- Available Orientations:Horizontal
- Audio Inputs:-
- Speaker Inputs:Wireless streaming from the MagniFi MAX sound bar system
SURROUND SPEAKER DIMENSIONS
- Orientation:Horizontal
- Height (on table):4.4” (113.1mm)
- Depth (on table):4” (103.8mm)
- Height (wall mounted):4.5” (116.3mm)
- Depth (wall mounted):3.6” (93mm)
- Width:7.8” (198.89mm)
|
For the full cinema-like experience, the ultimate T Series system has the best of everything: T301s all round, supported by the same discreet high performance subwoofer. However big your living area, it envelopes you in an expansive, richly textured sound picture that brings a movie to life as youʼve never experienced before.
T301 / T301c
Design Two and a half-way closed box
Drive units 2 x 115mm (4.5in.) dual layer MF
25mm (1in.) aluminium HF
Frequency response 80Hz - 30kHz
Crossover frequency 1.7kHz
Amplifier requirements 10 - 150 W
Sensitivity (2.83V/1m) 91dB (wall mount)
88dB (floor stand mount)
Maximum output (SPL) 110dB
Impedance 8Ω
Internal volume 1.4 Litres
Weight 1.5kg (3.3lbs)
Dimensions
(H x W x D) 600* x 140 x 35 mm
(23.6 x 5.5 x 1.4 in.)
Dimensions
(H x W x D)
centre mode 140 x 600 x 35 mm
(5.5 x 23.6 x 1.4 in.)
Finish Black
* Height of satellites will increase by 30mm when using supplied desk stand
Not all models / finishes are available in all markets. Contact your local dealer for specific range details.
T-2
Design Closed box powered subwoofer
Drive units 1 x 250mm (10in.)
Frequency response 30Hz - 250Hz
Amplifier 250 Watts built-in Class-D
Maximum output (SPL) 110dB
Low pass filter variable Fixed 250Hz, 2nd-order
Low level signal inputs RCA phono socket
Internal volume 12.7 Litres
Power requirements 100 - 240 V ac ~ 50/60Hz
Power consumption 250VA
Weight 13kg (28.6lbs)
Dimensions
(H x W x D) 380 x 370 x 177 mm
(15.0 x 14.6 x 7.0 in.)
Finish Black
Not all models / finishes are available in all markets.
Contact your local dealer for specific range details.
|
Driver Complements
Satellites
Mid/Woofer 4 - 3 1/4" Diameter (8.26cm)
Dynamic Balance bi-laminate composite cone drivers
Tweeter 4 - 3/4" Diameter (1.91cm)
Silk polymer dome tweeter
Center
Midrange 2 - 3 1/4" Diameter (8.26cm)
Dynamic Balance bi-laminate composite cone drivers
Tweeter 1 - 3/4" Diameter (1.91cm)
Silk polymer dome tweeter
Electrical
Overall Frequency
Response 90Hz-24kHz
Lower -3dB Limit 120 Hz
Upper -3dB Limit 20kHz
Nominal Impedance 8 ohms
Recommended Amplifier Power 10-125 w/channel
Efficiency 91 dB
Inputs Gold-plated 5-way binding posts with metal caps
Dimensions
Satellites
Cabinet Size 7 1/8" H x 4 1/8" W x 5 3/16" D
(18.10cm H x 10.48cm W x 13.18cm D)
Weight 3.00 lbs. (1.36kgs)
Mounting Options keyhole slot; .25 x 20 threaded insert
Enclosure Type Steel-plate reinforced curved enclosure with PowerPort bass venting
Center
Cabinet Size 4 1/4" H x 16 11/16" W x 3 13/16" D
(10.79cm H x 42.39cm W x 9.68cm D)
Weight 4.50 lbs. (2.04kgs)
Mounting Options keyhole slots; .25 x 20 threaded inserts
Enclosure Type Steel-plate reinforced curved enclosure with PowerPort Bass venting
Shipping/Other
Total Shipping Weight 20.00 lbs. (9.07kgs)
Speaker Warranty 5 years parts and labor (original purchaser)
|
Speaker System Home Cinema which contains:
1 pair 686 S2, 1 pair 684 S2, 1 piece
ΗΤΜ 62 S2 & 1 active subwoofer ASW 610. |
Frequency Response: C: 55 Hz - 35 KHz
L/R: 85Hz - 35KHz
Sensitivity (1W@1m): C: 90 dB
L/R: 87dB
Nominal Impedance: C: 8 Ohms
L/R: 8 Ohms
Power Handling Single (RMS): C: 100 W
L/R: 60 W
System Power Handling (RMS): C: 150 W
L/R: 100 W
Recommended Amplifier Requirements: C: 20 - 150 W
L/R: 10 - 100 W
Maximum SPL (dBA): 108
Bass Alignment: C: Bass reflex - front ported
L/R: Bass reflex - ported to the underside
Drive Unit Complement: 4 x 100mm (4“) MMP®II cone bass/mid driver.
3 x 25mm (1“) C-CAM® gold dome tweeter
External Dimensions
(H x W x D): mm (inches) 125 x 985 x 105 mm
(4 15/16 x 38 5/8 x 4 1/8)
Weight (each):
Kg (lbs) 8 (17 5/8)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual ![colorsaa]( "colorsaa")
| Model
Brand
Polk Audio
Model
TL1600
Spec
Type
Home Theater Speaker System
Channels
5.1CH
Sold As
System
Speakers Configuration
1 Center Speaker + 1 Subwoofer + 4 Surround Speakers
Driver Units
Center Speaker Midrange: 2 - 2.5" Diameter, Dynamic Balance composite cone driver
Center Speaker Tweeter: 1 - 0.5" Diameter, Silk polymer dome
Surround Speaker Midrange: 1 - 2.5" Diameter, Dynamic Balance composite cone driver
Surround Speaker Tweeter: 1 - 0.5" Diameter, Silk polymer dome
Subwoofer: 1 - 8" Diameter, Long-throw Dynamic Balance polymer composite driver
Power Rating
10-100 w/channel
Frequency Response
40Hz - 22kHz
Nominal Impedance
8 ohms
Connectors
Inputs: 5-way binding posts w/plastic caps
Dimensions & Weight
Center Speaker: 4" x 15" x 3.5" / 3.35 lbs.
Surround Speaker: 6.5" x 3.75" x 4.88" / 1.85 lbs.
Subwoofer: 13.88" x 12.5" x 12.5" / 20.50 lbs.
Cabinet
Center Speaker: Non-resonant composite w/time-aligned geometry and aperiodic tuned port
Surround Speaker: Non-resonant composite w/time-aligned geometry and aperiodic tuned port
Subwoofer: Downward firing vented port
Features
Features
Time Lens technology-The acoustic centers of the tweeter and mid-bass driver are located in the same plane for superior imaging, while the acoustic lens incorporated in the grille smoothes the tweeter's frequency response. The TL Series creates imaging and frequency balance previously impossible in small, high performance satellite speakers.
TL1 satellite aperiodic-tuned rear port enables better blending with a subwoofer. This design combines the bass extension of an acoustic suspension enclosure with the mid-bass boost of a ported enclosure by controlling airflow through the port for better extension without distortion.
TL1 center channel tuned rear port maximizes the low-end response of the dual driver design for superior blending with the satellites and the subwoofer.
Curved enclosure design employs non-parallel surfaces that not only lead to a stronger, more rigid and acoustically inert enclosure, but they also result in less audible coloration from internal surface resonances.
0.5" silk dome tweeter for crisp, clear imaging and smooth response that's never tiring.
2.5" long-throw driver with Dynamic Balance driver technology-Polk's unique transducer design process scientifically tunes materials to produce a flat frequency response, with sharp detail, transparency and the ability to play loud without strain.
5-way binding posts offer hookup versatility and secure connections.
Combination keyhole slot & 1/4" x 20 threaded insert fits all aftermarket ceiling and wall brackets for ultimate flexibility. Or simply hang the speaker securely on a nail or screw using the keyhole slot.
Hi-gloss "Blackstone" finish matches today's most stylish flat panel TV's.
Manufacturer Warranty
Parts
5 years limited
Labor
5 years limited |
Reviews
There are no reviews yet.