RAM BUX series – 2×1700 Watt Amplifier

Discontinued

Original price was: €3,008.73.Current price is: €2,406.98. incl. GR VAT

Out of stock

CompareAdd to wishlist Submit Better Price
  BUX Series ? BUX 3.4Professional Power Amplifier Presentation Power amplification at its best means absolutely linear handling of any complex audio signal. Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability. With these qualities, RAM Audio […]

 

Read more

 

BUX Series ? BUX 3.4
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.

Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 2900W
2x 1750W
2x 970W
5800W
3500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 3500W
2x 2200W
Frequency Response
Power Bandwidth ±0.25dB 20Hz – 20kHz
Phase Response
@ 1watt 20Hz – 20kHz ±15deg
Total Harmonic Distortion
20Hz – 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz – 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.82V
Signal-to-Noise-Ratio
A weighted
No weighting
118dB
106dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 8.5A
Dimensions
W x H x D 483 x 133 x 480 mm
19 x 5.25 x 18.9 in
Weight
Shipping
Net
40.6 Kg – 89.5 Lbs
38 Kg – 83.8 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO
Weight 41.00 kg

Reviews

There are no reviews yet.

Be the first to review “RAM BUX series – 2×1700 Watt Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

RAM BUX series - 2x1700 Watt Amplifier removeYAMAHA PC-9501N Power Amplifier 2x1050W removeQSC GXD 8 amplifier 2x1200W RMS 4Ω removeINTERM R-150 PLUS AMPLIFIER 2X75W removeELECTRO VOICE TG7 High Power Amplifier, Class-H ,Switch Mode Pwr Supply, 2U 2 x 2500 W removeMC2 Audio E45 POWER AMPLIFIER 2x2500W 4ohm 230V remove
NameRAM BUX series - 2x1700 Watt Amplifier removeYAMAHA PC-9501N Power Amplifier 2x1050W removeQSC GXD 8 amplifier 2x1200W RMS 4Ω removeINTERM R-150 PLUS AMPLIFIER 2X75W removeELECTRO VOICE TG7 High Power Amplifier, Class-H ,Switch Mode Pwr Supply, 2U 2 x 2500 W removeMC2 Audio E45 POWER AMPLIFIER 2x2500W 4ohm 230V remove
Image
SKUSBUX34H060.00033010150R-150 PLUS001916E45
Rating
Price Original price was: €3,008.73.Current price is: €2,406.98. incl. GR VAT Original price was: €2,676.00.Current price is: €2,355.00. incl. GR VAT Original price was: €1,200.00.Current price is: €1,079.00. incl. GR VAT Original price was: €510.00.Current price is: €459.00. incl. GR VAT4,385.00 incl. GR VAT Original price was: €3,789.44.Current price is: €3,220.28. incl. GR VAT
Stock

Out of stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOut of stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content  
BUX Series ? BUX 3.4
Professional Power Amplifier

Presentation

Power amplification at its best means absolutely linear handling of any complex audio signal.

Our BUX Series are unique, powerful amplifiers built to meet the highest professional requirements, thanks to new circuit philosophy that guarantees outstanding performance with field proven reliability.

With these qualities, RAM Audio units outperform most modern amplifiers in terms of technical specs and pure sonic performance. 

To achieve industrial economy and efficiency, the BUX Series Power Modules, share component topology and maintain technical coherence by increasing heat sink size according to power output.

BUX Series have been designed giving extreme attention to all production steps from the engineering stand point. All boards are naturally double sided plate-through fibre glass. Most advanced SMT circuits are used for overall reliability, ease of assembly and full field servicing.
Features
2/3U high, heavy duty steel chassis
Modular construction for easy servicing
Symmetrical layout for even weight distribution
High efficiency toroidal main transformer
Oversized, high energy, linear power supply
Dual, parallel or bridged operation
Twin balanced inputs (Neutrik XLR connectors)
Dual Speakon and Binding posts outputs
41 step detented input attenuators
High quality components used throughout
Efficient back to front cooling
Dual, continuously variable speed axial fans
Fault, signal, and clip indicators
Duraluminium, 8mm thick front-panel
Unobtrusive carrying handles
Protections

Calibrated mains fuse
Independent channel supply fuses
Input signal muting at turn on
Continuous short-circuit protection (CSP)
Thermal overload protection
Intelligent clip-limiter (ICL)
Progressive Ramp input signal
Currentless relay operation (CRO)
Technical Specifications
Output Power
Continuous Average Power RMS, 1kHz, 1.0%THD+N
@ 2 ohms
@ 4 ohms
@ 8 ohms
Bridge @ 4 ohms
Bridge @ 8 ohms
2x 2900W
2x 1750W
2x 970W
5800W
3500W
Pink Noise 12dB Crest Factor 
@ 2 ohms
@ 4 ohms
2x 3500W
2x 2200W
Frequency Response
Power Bandwidth ±0.25dB 20Hz - 20kHz
Phase Response
@ 1watt 20Hz - 20kHz ±15deg
Total Harmonic Distortion
20Hz - 20kHz
Intermodulation Distortion
SMPTE
Crosstalk
20Hz - 20kHz >75dB
Voltage Gain
dB 33.1dB
Sensitivity
Rated Power@4ohms 1.82V
Signal-to-Noise-Ratio
A weighted
No weighting
118dB
106dB
Required AC Mains 230V/50Hz or 120V/60Hz
1/8 rated power (230V@4ohms) 8.5A
Dimensions
W x H x D 483 x 133 x 480 mm
19 x 5.25 x 18.9 in
Weight
Shipping
Net
40.6 Kg - 89.5 Lbs
38 Kg - 83.8 Lbs
Protections
Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit (CSP), Open or mismatched loads, Overloaded power supply, Input overload (ICL), CRO

A full model revision takes Yamaha's high-end PC-N power amplifiers to the next level - the PC-1N
Series. The new PC-1N Series amplifiers feature an extraordinarily solid low end, rich midrange,
and superbly defined highs. They also deliver fast response and exceptional stability even in the face
of serious power supply limitations. Refinements throughout this expanded five-model lineup make
these amplifiers the new benchmarks for quality, reliability, and versatility in professional applications. Frequency Response: 10 Hz – 40 KHz. Ισχύς 2 x 1050 Watt / 8Ω RMS, 2 x 1650 Watt / 4Ω RMS, 3000 Watt / 8Ω bridge RMS. Weight: 13 κιλά. 
 

  • Ισχύς (Stereo Mode):
        2x1500W @ 8Ω dynamic
        2x800W @ 8Ω continuous
        2x2250W @ 4Ω dynamic
        2x1200W @ 4Ω continuous
  • Παραμόρφωση (1 kHz full rated power):-
  • Signal to Noise (A weighted, 20 Hz–20 kHz): -
  • Ευαισθησία εισόδου: -
  • Maximum Voltage Gain: 36.5 dB
  • Κύκλωμαεξόδου: Class D
  • Απαιτήσεις ισχύος: 1/8 ισχύος στα 4Ω

    • -100V AC: 6.2A
    • -120V AC: 5.6A
    • -230V AC: 3.2A

    Dynamic Headroom (4Ω): 2.73 dB
    Damping Factor (8Ω): 100
    Απόκριση Συχνότητας (20 Hz-20 kHz): +0.7 dB, -0.8 dB
    Αντίσταση εισόδου: 20 kΩ (balanced), 10 kΩ (unbalanced)
    Maximum Input Level: +23.5 dBu

    Συνδέσεις ανά κανάλι:

    • 3-pin XLR θυληκο
    • 1/4" TRS, balanced

      Υπάρχει επιπλεόν είσοδος USB type B, χρήση μόνο για την ενημέρωση του λογισμικού του ενισχυτή.

    Έξοδοι ανά κανάλι :

    • Speakon binding posts
    • Speakon pinout: Channel A on 1+, 1-; Channel B on 2+, 2; Channel B on 1+, 1-

    Προστασίες ενισχυτή και υπερφόρτωσης: short circuit, open circuit, υπερθέρμανσης, RF και DC faults.

    'Ελεγχοι:

    • 2 x Περιστρεφόμενοι encoders
    • 3 x κουμπιά λειτουργίας (HOME, ENTER, EXIT)

    Ενδείξεις:

    • Power-On: Μπλε LED
    • Σήμα: 2 x Πράσινο LED
    • Clip: 2 x Κόκκινο LED

    Λειτουργίες DSP:

    • High-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 20 Hz to 4 kHz
    • Low-pass filter, 4th-order Linkwitz-Riley, adjustable frequency 60 Hz to 4 kHz
    • 4-band parametric EQ with variable frequency, gain, and bandwidth
    • Peak limiter with power, agressiveness, and impedance selection
    • Delay 50 msec max.
    • Διαστάσεις: 89 × 483 × 259 mm 2U
    • Βάρος: 6 kg (net), 7.8 kg (shipping)

    Power Output Level R-150 PLUS

    STEREO
    8ohm(T.H.D 0.05%)  50W+50W
    4ohm(T.H.D 0.05%)  75W+75W

    BRIDGED MONO
    8ohm(T.H.D 0.05%)  50W
    8ohm(T.H.D 0.5%)  170W

    Frequency Response 20Hz- 20kHz, ±0.5dB

    Convection Cooled

    SoftStart Protection System

    Balanced 10kΩ@0.775V Inputs

    Amplifier Gain    39 dB, 35 dB 32 dB (switchable)
    CAN Bus Interface    Optional with RCM-26
    Continuous Rated Power
    (1 kHz, THD 1%) 2Ω    3500 Watts
    Continuous Rated Power
    (1 kHz, THD 1%) 4Ω    2500 Watts
    Continuous Rated Power
    (1 kHz, THD 1%) 8Ω    1500 Watts
    Continuous Rated Power
    (20-20 kHz, THD

    The E Series is a range of lightweight, high-power switch mode amplifiers designed to the highest standards of reliability and sound quality. Developed for the touring market, E Series retain the sonic integrity of the benchmark MC and T Series amplifiers, without the physical weight.

    The switch mode power supply is capable of delivering high peaks without any perceptible bass 'sag' at very low distortion and is kept within its safe operating area by the new, sophisticated MC² Audio 'intelligent' limiter. The E15, E25, E45 and E4-75 feature MC² Audioʼs proprietary current driven output stages for ultra-high definition sound, delivered over the entire audio bandwidth.

    The E90 and the E100 are Class D amplifiers designed to meet the demands for higher power with increased efficiency whilst still maintaining the renowned MC² Audio sonic qualities and unsurpassed reliability.

    All MC² Audio products are covered by a 5 year warranty.


    Number of Channels: 2

    Frequency Response:

    20Hz to 20kHz
    (+/- 0.3dB)


    Output Power: (per channel)

    8 ohms 1250W
    4 ohms 2500W
    2 ohms 4200W

    Output Power: (bridged)

    8 ohms 5000W
    4 ohms 8400W

    THD%: (@1dB below max output)

    @ 1kHz 20Hz to 20kHz
    Gain / Sensitivity:

    Gain 26/32/33dB

    Sensitivity (for max power) dBu +15.7/9.7/5.7 (4.7/2.4/1.5V)



    Power Consumption:

    Nominal @ 240v into 4 ohms 4.5A

    Nominal @ 120v into 4 ohms 9.0A


    Dimensions: (2U) (mm)

    Amplifier 88(h) x 482(w) x 428(d)
    Single Box (UK shipping) 230 x 580 x 560
    Double Box (outside UK) 250 x 610 x 600

    Weight:

    Amplifier 11.4kg
    Boxed (shipping weight) 13.4kg

    User's Manual
    Weight41.00 kg13.00 kg6.00 kg7.20 kg14.50 kg13.40 kg
    DimensionsN/AN/AN/AN/AN/AN/A
    Additional information
    Weight 41.00 kg
    Weight 13.00 kg
    Weight 6.00 kg
    Weight 7.20 kg
    Weight 14.50 kg
    Weight 13.40 kg

    Recently Viewed Products