CB Series ? CB 3902Rugged Power Amplifier Presentation The CB Series is a medium cost ensemble of amplifiers covering the most used power specifications. The four offered models share the well proven RAM Audio topology for ease of servicing. The latest breakthrough in component assembly and manufacturing processes are present in this new Series. All […]
The CB Series is a medium cost ensemble of amplifiers covering the most used power specifications. The four offered models share the well proven RAM Audio topology for ease of servicing.
The latest breakthrough in component assembly and manufacturing processes are present in this new Series.
All the models are equipped with high efficiency toroidal transformers and long life capacitors in a common, sturdy two U steel chassis.
The sum of these specs put them on the front row of cost/effectiveness for all fixed and mobile uses.
The CB Series is a medium cost ensemble of amplifiers covering the most used power specifications. The four offered models share the well proven RAM Audio topology for ease of servicing.
The latest breakthrough in component assembly and manufacturing processes are present in this new Series.
All the models are equipped with high efficiency toroidal transformers and long life capacitors in a common, sturdy two U steel chassis.
The sum of these specs put them on the front row of cost/effectiveness for all fixed and mobile uses.
2x1350W/4Ω-1000W/8Ω-1Χ2700W
Crown XLI 3500
The Crown XLI 3500 is a reasonably priced, but robust and powerfull power amplifier. It suits ideally for the use in budget-oriented applications at mobile and stationary area. It offers a power of 2 x 1800 W / 4 Ohm. Thereby the integrated fan guarantees a high operating safety, due to the constant airstream for cooling the power amplifier. The XLI 3500 offers a robust an analogue circuit, which is supplied by a conventional power supply. Furthermore it features three different, selectable modes (stereo, bridge and parallel).
Crown XLI 3500:
Reasonably priced, robust and powerfull power amplifier
Robust and analog circuit
LED display for each channel for signal, clip and error
Stereo, bridge and parallel modes
Conventional power supply
Performance: 2 x 1200 W / 8 Ohm, 2 x 1800 W / 4 Ohm
Inputs: Cinch, XLR
Outputs: 2 x speakon, spring clip
Robust 19 inch housing
Hight: 2 hight units
Specifications
XLi800
XLi1500
XLi2500
XLi3500
Channels
2
2
2
2
Sensitivity (full rated power at 8 ohms)
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
0.775V or 1.4V
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted)
> 100 dB
> 100 dB
> 100 dB
> 100 dB
Total Harmonic Distortion (THD) (20Hz - 20kHz)
Inter Modulation Distortion (60Hz and 7kHz at 4:1 from full rated output to -40 dB)
= /
= /
= /
= /
Frequency Response (at 1W, 20Hz - 20kHz)
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
0 dB, -1 dB
Crosstalk (below rated power)
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 1kHz: -75 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
at 20kHz: - 59 dB
Damping Factor (from 10Hz to 400Hz, 8 ohms)
> 200
> 200
> 200
> 200
AC Line Voltage and Frequency Configurations (± 10%)
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
120VAC 60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
220VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
230-240VAC 50/60Hz
Dimensions (H x W x D)
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 12.4“
3.5" x 19" x 14.4“
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 315mm)
(89 x 482 x 366mm)
Net Weight
25.1 lb (11.4 kg)
28.0 lb (12.7 kg)
29.7 lb (13.5 kg)
43.0 lb (19.5 kg)
Net Shipping Weight
29.5 lb (13.4 kg)
32.4 lb (14.7 kg)
34.2 lb (15.5 kg)
47.4 lb (21.5 kg)
VLP Series Power Amplifier
- 1100W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 700W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- 2200W RMS @ 8 Ohms, 1K Hz, 1% THD (Bridge Mode, Mono)
- Total Harmonic Distortion: Less Than 0.5% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-05db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 20V Per usec
- Damping Factor @ 8 Ohm: 450
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 high speed cooling fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / Limiter
- Dimensions (LxWxH): 17.75" x 19" x 3.5" / 453 x 482 x 88mm (2 rm spaces)
- Weight: 50 lbs. / 23 Kgs.
This professional stereo power amplifier, working in class-H mode, provides 2x1600W, at an efficiency of around 85%.
A massive transformer based power supply and hand selected components makes this power rating possible with exceptional audio quality and absolute reliability, even in the 2 Ohm mode.
The output stage is fully protected against over-temperature, short circuit, RFI and equipped with soft start circuit and temperature-controlled fan cooling.
The integral soft clip limiter protects against damage to the connected loudspeakers.
The activity of a protective circuit, signal and limiter is shown for each channel by LEDʼs.
AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:
2 x 1600 Watt rms
Power output stereo 4Ω:
2 x 1100 Watt rms
Power output stereo 8Ω:
2 x 700 Watt rms
Power output bridged 4Ω:
3200 Watt rms
Power output bridged 8Ω:
2200 Watt rms
Frequency Response:
20 Hz ÷ 20 kHz
Signal/noise rate:
> 102 dB
Crosstalk:
> 65 dB
Distortion (THD+N):
Intermodulation:
Damping factor:
400:1 (8 W)
Slew rate:
50 V/μS
INPUT SECTION
Input connector:
2 x XLR balanced, 6,3mm jack unbalanced
Input sensitivity:
0 / 0.775 dBm/V RMS
Input impedance:
20.000 kΩ
Controls:
Volume control for each channel
OUTPUT SECTION
Output connector:
2 x Neutrik Speakon 4 ways
SYSTEM PARAMETERS
Cooling:
Two-speed fan
Protections:
Thermal, temperature, direct current, short circuit, RFI
POWER REQUIREMENT
Operating voltage:
220÷240 / 110÷120 ~ 50 / 60 V ~ Hz
Max.current:
16 A
Power Consumption:
6500 W
PHYSICAL SPECIFICATIONS
Height:
132 / 5.19 mm/inch
Width:
483 / 19.01 mm/inch
Depth:
455 / 17.91 mm/inch
Net Weight:
29.5 / 65.03 Kg/Lbs
SHIPPING INFORMATION
Package height:
200 / 7.87 mm/inch
Package width:
575 / 22.63 mm/inch
Package depth:
555 / 21.85 mm/inch
Shipping Weight:
32.5 / 71.64 Kg/Lbs
The power amp H2500 is part of Dynacordʼs new PowerH SERIES, which marks a milestone in the design and the production of high-performance power amplifiers. The innovative 3-stage Grounded Bridge Class H Topology with "floating” switching power supply unit offers very high and stable output with extreme high efficiency on an extremely high performance level at minimum weight. PowerH amps are ideal for driving professional touring, high-end Concert-Sound and Pro-Sound applications. Next to classical protections, this new design employs the multi-stage ATP system (Advanced Thermal Protection) for the first time, which in most cases prevents the power amplifier from switching off when the temperature exceeds a critical level. The newly designed MCS system (Mains Current Supervision) prevents power amplifier breakdown caused by the activation of the automatic circuit breaker. For this, among other things, the MCS system uses the highly precise measurement of the RMS value ofthe actual mains current consumption. Information about the status of the power amplifier and its internal protections is provided on a LC-display. By utilizing the optionally available remote control module that is compatible with IRIS-Net™, this power amplifier additionally offers comprehensive remote monitoring and remote control functions plus a universal 2-channel digital audio controller (DSP) including highly precise FIR-filtering and digital speaker protection algorithms. Datasheets / ManualsManual (5.50MB)
Load Impedance 2 O, 4 O, 8 O Maximum Midband, Output Power, 1 kHz, THD=1% 2 O - 1900 W, 4 O - 1450 W, 8 O - 850 W Rated Output Power, 20 Hz ... 20 kHz, THD 400 Slew Rate 30 V/µs Signal to Noise Ratio Amplifier, A-weighted, 32 dB constant gain 109 dB Output Noise , A-weighted
HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.
A forced air cooling system maintains a low operating temperature.
Features
Fast response and low distortion
Easy to configure in stereo / mono / bridge modes
Extensive protective circuits ensure high reliability and operating safety
Front panel signal / clip / protect LED indicators
Minimum load impedance (stereo / mono): 2 Ohm
XLR input connectors
SPEAKON output connectors
2 unit 19" rack, low weight for easy transportation
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.