DPS 3000 is a 2 channel power amplifier that can handle exceptionally high power ratings in a compact and lightweight 2 rack units space. Thanks to the class HD technology, this amplifier delivers up to 2 x 1700 W RMS @ 2 Ohm (3400 W RMS bridged @ 4 Ohm), weighting just 14 kg. It […]
DPS 3000 is a 2 channel power amplifier that can handle exceptionally high power ratings in a compact and lightweight 2 rack units space.
Thanks to the class HD technology, this amplifier delivers up to 2 x 1700 W RMS @ 2 Ohm (3400 W RMS bridged @ 4 Ohm), weighting just 14 kg.
It comes with a ʽPFCʼ (ʽPower factor correctionʼ) switched mode power supply which ensures that a predominantly
resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the DPS 3000 can withstand the hardest heat conditions ensuring great reliability.
AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:
2 x 1700 Watt rms
Power output stereo 4Ω:
2 x 1200 Watt rms
Power output stereo 8Ω:
2 x 800 Watt rms
Power output bridged 4Ω:
3400 Watt rms
Power output bridged 8Ω:
2400 Watt rms
Frequency Response:
20 Hz ÷ 20 kHz
Signal/noise rate:
108 dB
Damping factor:
> 1000
Slew rate:
55 V/μS
INPUT SECTION
Input connector:
xlr
Input sensitivity:
1.4 dBm/V RMS
OUTPUT SECTION
Output connector:
Speakon
SYSTEM PARAMETERS
Cooling:
Temperature-controlled fan
Protections:
Temp., DC, RFI, short-circuit
Voltage gain:
32 – 26 dB
Amplifier class:
HD
POWER REQUIREMENT
Operating voltage:
90 ÷ 245 V (50 / 60 Hz) V ~ Hz
Power Consumption:
SMPS W
Power factor (cos φ):
0.95 from 200 W to full power
PHYSICAL SPECIFICATIONS
Height:
88/3.4 mm/inch
Width:
482/18,9 mm/inch
Depth:
420/16.5 mm/inch
Net Weight:
14/30.8 Kg/Lbs
Weight
16.00 kg
Reviews
There are no reviews yet.
Be the first to review “RCF DPS 3000: CLASS HD PROFESSIONAL POWER AMPLIFIER” Cancel reply
DPS 3000 is a 2 channel power amplifier that can handle exceptionally high power ratings in a compact and lightweight 2 rack units space.
Thanks to the class HD technology, this amplifier delivers up to 2 x 1700 W RMS @ 2 Ohm (3400 W RMS bridged @ 4 Ohm), weighting just 14 kg.
It comes with a ʽPFCʼ (ʽPower factor correctionʼ) switched mode power supply which ensures that a predominantly
resistive load is presented to the mains power supply; this also leads to an improved amplifier performance at high output levels. Thanks to its high efficiency heat sinks and variable speed DC fans, the DPS 3000 can withstand the hardest heat conditions ensuring great reliability.
AMPLIFIER SPECIFICATIONS
Power output stereo 2Ω:
2 x 1700 Watt rms
Power output stereo 4Ω:
2 x 1200 Watt rms
Power output stereo 8Ω:
2 x 800 Watt rms
Power output bridged 4Ω:
3400 Watt rms
Power output bridged 8Ω:
2400 Watt rms
Frequency Response:
20 Hz ÷ 20 kHz
Signal/noise rate:
108 dB
Damping factor:
> 1000
Slew rate:
55 V/μS
INPUT SECTION
Input connector:
xlr
Input sensitivity:
1.4 dBm/V RMS
OUTPUT SECTION
Output connector:
Speakon
SYSTEM PARAMETERS
Cooling:
Temperature-controlled fan
Protections:
Temp., DC, RFI, short-circuit
Voltage gain:
32 – 26 dB
Amplifier class:
HD
POWER REQUIREMENT
Operating voltage:
90 ÷ 245 V (50 / 60 Hz) V ~ Hz
Power Consumption:
SMPS W
Power factor (cos φ):
0.95 from 200 W to full power
PHYSICAL SPECIFICATIONS
Height:
88/3.4 mm/inch
Width:
482/18,9 mm/inch
Depth:
420/16.5 mm/inch
Net Weight:
14/30.8 Kg/Lbs
VLP Series Power Amplifier
- 1100W RMS Per Channel @ 4 Ohms, 1kHz, 0.1% THD
- 700W RMS Per Channel @ 8 Ohms, 1kHz, 0.1% THD
- 2200W RMS @ 8 Ohms, 1K Hz, 1% THD (Bridge Mode, Mono)
- Total Harmonic Distortion: Less Than 0.5% (20Hz - 20kHz @ 8 Ohms)
- Frequency Response: (+/-05db, @rated output Power, 8 Ohms): 20Hz - 20K Hz
- Slew Rate: 20V Per usec
- Damping Factor @ 8 Ohm: 450
- Impedance: 20 Ohms balanced / 10 Ohms unbalanced
- Cooling System: 2 high speed cooling fans
- Special Features: High/Low Pass Filter / Input Sensitivity Selector / Ground Lift / Limiter
- Dimensions (LxWxH): 17.75" x 19" x 3.5" / 453 x 482 x 88mm (2 rm spaces)
- Weight: 50 lbs. / 23 Kgs.
The new Audio 3-stage CLASS-H SMPS amplifiers incorporate all the features to meet all your needs, whether youʼre starting a P.A. amplifier project from scratch or just need to upgrade your present sound reinforcement equipment. In the amps, youʼll find 2 and 4 channel models, all offering high power levels at low distortion in the range 1.5 to 6 kW, yet weighing around 8.6 kg and only 30 cm deep.
Model Name: SP4K
Output Power 1 kHz, 500
Crosstalk (20 Hz - 20 kHz): > 75 dB
Voltage Gain (selectable): 26 / 32 / 38 dB
Input Sensitivity: 4.0 / 2.0 / 1.0 V
Protection: Soft-start, Turn-on Turn-off transients, Muting at turn-on, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, ICL (Inteligent Clip Limiting), PMS (Power Management System), SSP (SOA Sentry Protection)
Controls: On / Off Switch, Volume, Voltage Gain, Dual / Link Switchable, Bridge Mode Configuration Switch
Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
</td>
<td>16,2</td>
</tr>
<tr>
<td>Power (8 ohms/Watt RMS) per channel</td>
<td>650</td>
</tr>
<tr>
<td>Power (4 ohms/Watt RMS) per channel</td>
<td>1300</td>
</tr>
<tr>
<td>Power (2 ohms/Watt RMS) per channel</td>
<td>2200</td>
</tr>
<tr>
<td>Series</td>
<td>L series</td>
</tr>
<tr>
<td>Model</td>
<td>L2800FD</td>
</tr>
<tr>
<td>Part Number</td>
<td>F01U312392</td>
</tr>
<tr>
<td>Warranty</td>
<td>3 Years Warranty</td>
</tr>
</tbody>
</table></td><td>
<p>
HPS 2500 is a 2 channel power amplifier that delivers up to 2 x 1400 W RMS @ 2 Ω (2800 W RMS bridged @ 4 Ω).<br>
<br>
XLR inputs for patching in signals as well as Speakon ports for connecting speaker systems are provided for the maximum flexibility.<br>
A forced air cooling system maintains a low operating temperature.
</p>
<table><tbody><tr><th>Features</th> </tr><tr><td>Fast response and low distortion</td></tr><tr><td>Easy to configure in stereo / mono / bridge modes</td></tr><tr><td>Extensive protective circuits ensure high reliability and operating safety</td></tr><tr><td>Front panel signal / clip / protect LED indicators</td></tr><tr><td>Minimum load impedance (stereo / mono): 2 Ohm</td></tr><tr><td>XLR input connectors</td></tr><tr><td>SPEAKON output connectors</td></tr><tr><td>2 unit 19 "acrobat_reader_logo."){kind=logo}
Reviews
There are no reviews yet.