Content | RCF MB12G301-8 12" Woofer Speaker
High efficiency 12" mid-bass.
Very high sensitivity, excellent linearity and very low distortion.
Voice coil construction, suspensions and cone materials designed to survive at 400 Watt RMS power.
Features :
3-inch, fiberglass inside/outside copper voice coil
800W continuous program power handling
98 dB Sensitivity
50 Hz – 3 kHz Frequency range
M-roll surround and exponential cone geometry
Applications :
A very light moving mass, a curve response linear above 3 kHz makes the MB12G301 a very good solution for high quality two or three way system.
The aluminum voice coil guarantee a very high efficiency in conjunction to a proper Q factor for a good bass response.
General
|
Product type |
Cone driver |
Brand |
RCF |
Reference |
MB12G301 |
Product code |
11100017 |
Informations
|
Nominal impedance |
8 ohm |
Dimensional category |
12.5 inch |
Frequency coverage type |
Low, Midbass, Midrange |
Manufacturer sensitivity |
98 dB |
Calculated sensitivity |
97.68 dB |
Nominal power handling |
400 W |
Bandwidth |
50÷3000 Hz |
Fundamental parameters
|
Sd |
530 cm² |
Mms |
48 gr |
Le |
0.7 mH |
Re |
5.4 ohm |
BL |
17 T.m |
Small signal parameters
|
Fs |
53 Hz |
Qes |
0.28 |
Qms |
4.7 |
Qts |
0.27 |
Vas |
72 L |
Datas
|
Xmax |
±6 mm |
Calculated Xmax |
±7.3333 mm |
EBP |
189 Hz |
Zmin |
7 ohm |
Fs / Qts |
196 Hz |
Vas * Qts² |
5.25 L |
Efficiency |
3.69 % |
Calculated efficiency |
3.68 % |
Dimensions
|
Voice coil diameter |
3 inch |
Winding depth |
16 mm |
Gap height |
4 mm |
Outside diameter |
320 mm |
Baffle cutout diameter |
280 mm |
Front thickness |
13 mm |
Depth after front |
133 mm |
Diamètre aimant (mm) |
200 mm |
Shape & Materials
|
Front chape |
Cylindrical |
Magnet type |
Ferrite |
Basket masterial |
Aluminium |
Winding material |
Aluminium |
Voice coil former |
Glass fiber |
Surround material |
Cloth |
|
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.
With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 65W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 97dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Rounded copper | Magnet type | Ceramic | Magnet weight | 35oz, 0.99kg | Frequency range | 80-5000Hz | Resonance frequency, Fs | 85Hz | DC resistance, Re | 6.9Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 5.0“, 128mm | Magnet structure diameter | 5.7“, 145mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 12.1lb, 5.5kg |
|
- 98 dB sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich voice Coil
- Triple Aluminum Demodulating Rings
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quality Sound
- Optimal for compact 2-way Systems
| The B&C 12NW100 speaker is designed to produce bass, it is typically a 12 inch usable as a bass power speaker in a subwoofer for a compact system often transported. The 12NW100 will delight you with bass-reflex or band-pass load, its significant admissible electrical power makes it a real machine for producing bass, however, special care must be taken with the amplification dedicated to it.
2000 W continuous program power capacity
100 mm (4 in) copper voice coil
45 - 1500 Hz response
96 dB sensitivity
FEA optimized Neodymium magnet assembly
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
General
|
Product type |
Cone driver |
Brand |
B&C Speakers |
Reference |
12NW100 |
Product code |
ALT12NW1008 |
Informations
|
Nominal impedance |
8 ohm |
Dimensional category |
12.5 inch |
Frequency coverage type |
Sub, Low, Midbass |
Manufacturer sensitivity |
96 dB |
Calculated sensitivity |
93.76 dB |
Nominal power handling |
1000 W |
Bandwidth |
45÷1500 Hz |
Fundamental parameters
|
Sd |
531 cm² |
Mms |
119 gr |
Le |
1.9 mH |
Re |
5.1 ohm |
BL |
28 T.m |
Small signal parameters
|
Fs |
42 Hz |
Qes |
0.21 |
Qms |
3.6 |
Qts |
0.2 |
Vas |
44 L |
Datas
|
Xmax |
±9 mm |
Calculated Xmax |
±10.5 mm |
EBP |
200 Hz |
Zmin |
6.2 ohm |
Fs / Qts |
210 Hz |
Vas * Qts² |
1.76 L |
Efficiency |
1.7 % |
Calculated efficiency |
1.5 % |
Weight |
~8.2 kg |
Recommended load volume |
50 L |
Fréquence d'accord liée à la charge |
50 Hz |
Dimensions
|
Voice coil diameter |
4 inch |
Winding depth |
25 mm |
Gap height |
12 mm |
Outside diameter |
319 mm |
Baffle cutout diameter |
281 mm |
Front thickness |
13 mm |
Depth after front |
124 mm |
Shape & Materials
|
Front chape |
Cylindrical |
Magnet type |
Neodymium |
Basket masterial |
Aluminium |
Winding material |
Copper |
Voice coil former |
Glass fiber |
|
Specification Nominal Diameter 320 (12) mm (in) Nominal Impedance (1) 8 Ohm Minimum Impedence 7.5 Ohm Nominal Power Handling (2) 450 W Continuous Power Handling (3) 900 W Sensitivity (1W/1m) (4) 95 dB Frequency Range 40 - 1000 Hz Voice Coil Diameter 76 (3) mm (in) Winding Material Copper Former Material Glass Fibre Winding Depth 22 (0.9) mm (in) Magnetic Gap Depth 10.5 (0.4) mm (in) Flux Density 1.15 T
Thiele & Small Parameters Fs 42 Hz Re 6.1 Ohm Qes 0.22 Qms 3.8 Qts 0.2 Vas 75 (2.6) dm3 (ft3) Sd 522 (80.9) cm2 (in2) Eta Zero 2.4 % Xmax +/- 7 mm Xvar +/- 9 mm Mms 74 g Bl 23.5 Txm Le 2 mH
Mounting and Shipping Info Overall Diameter 316 mm (12.4 in) Bolt Circle Diameter 296 mm (11.6 in) Baffle Cutout Diameter 282 mm (11.1 in) Depth 140 mm (5.5 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 7.6 kg (16.7 lb) Shipping Weight 8.4 kg (18.5 lb) Shipping Box 340x340x170 mm (13.4x13.4x6.7 in) 1For different impedances, please ask. 22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. |
This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers. In its original incarnation as the G12 T530 it appeared in several colour variations, but it was the Blue version, fitted as standard into Vox AC30 amps, that secured its place in guitar tone history.
The Blue found favour with notable guitarists like Brian May, due to its glorious dampened attack, warm lows, mellow upper-mids and brilliant belllike top-end. When coupled with a suitable amplifier it evokes rich definition and develops beautiful musical compression when pushed. According to tone enthusiasts worldwide, the Blue is the benchmark for guitar speaker perfection.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 15W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
Reviews
There are no reviews yet.