REACT PA-70 Amplifier with bluetooth, usb, tuner radio, 150W 100V

Original price was: €155.00.Current price is: €148.00. incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
KODA REACT PA-70 Amplifier with bluetooth, usb, tuner radio, 150W 100V Priority input  and radio 150W USB or Card reader 2 AUX in, 1 AUX out 2 mic in (1 with priority) With remote control Output 8-16Ω/70V/100V, 1 zone

 

Read more

KODA REACT PA-70 Amplifier with bluetooth, usb, tuner radio, 150W 100V

Priority input  and radio 150W

USB or Card reader

2 AUX in, 1 AUX out

2 mic in (1 with priority)

With remote control

Output 8-16Ω/70V/100V, 1 zone

Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “REACT PA-70 Amplifier with bluetooth, usb, tuner radio, 150W 100V”

Your email address will not be published. Required fields are marked *

Quick Comparison

REACT PA-70 Amplifier with bluetooth, usb, tuner radio, 150W 100V removeTOA CA-115 35W Mobile Amplifier removeTOA A-2120 120 Watt Amplifier removeBITTNER AUDIO XV400-2x200W-100V POWER AMPLIFIER removeINTER-M PAM-520 ZONE AMPLIFIER 240W removeTOA A-2240 240 Watt Amplifier remove
NameREACT PA-70 Amplifier with bluetooth, usb, tuner radio, 150W 100V removeTOA CA-115 35W Mobile Amplifier removeTOA A-2120 120 Watt Amplifier removeBITTNER AUDIO XV400-2x200W-100V POWER AMPLIFIER removeINTER-M PAM-520 ZONE AMPLIFIER 240W removeTOA A-2240 240 Watt Amplifier remove
Image
SKUPA-70CA 115A-2120XV400PAM-520A-2240
Rating
Price Original price was: €155.00.Current price is: €148.00. incl. GR VAT Original price was: €124.20.Current price is: €112.00. incl. GR VAT Original price was: €384.39.Current price is: €348.00. incl. GR VAT Original price was: €979.60.Current price is: €892.79. incl. GR VAT Original price was: €1,008.63.Current price is: €707.00. incl. GR VAT Original price was: €647.70.Current price is: €583.00. incl. GR VAT
Stock

Available on backorder

Available on backorder

In stock

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderIn stockAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
ContentKODA REACT PA-70 Amplifier with bluetooth, usb, tuner radio, 150W 100V Priority input  and radio 150W USB or Card reader 2 AUX in, 1 AUX out 2 mic in (1 with priority) With remote control Output 8-16Ω/70V/100V, 1 zone
  • Easy installation in practically any 12V battery equipped car.
  • Compact, rugged construction and front panel controls.
  • Two phone jack mic. inputs and handy phone jack AUX input for external equipment connection.
  • Unidirectional dynamic microphone with talk switch.

Specification
Power Source Standard voltage: 14VDC
Usable Voltage; 10 ~ 16V DC (12V Battery Used)
Power Consumption 2.2A or less at rated power output.
Output Power Rated 15W, max. 35W
Output Impedance 4Ω (BRN), 8Ω (ORG), COmmon (WHT)
Changeable by changing lead wire connections.
Distortion Less than 5% (at 1kHz rated output)
Frequency Response 100 ~ 10,000Hz
Input Mic 1, 2 : 600Ω, 4 mV, Phone Jack
Aux : 10 kΩ, 500 mV, Phone Jack
Dimensions (W x H x D): 178 x 50 x 132mm (mounting device excluded)
Weight 900g
Finish Front panel; ABS resin, Black
Case; Zinc plated steel sheet
Accessory Microphone holder ... 1
Mounting Bracket ... 1
Mounting Screw ... 1
Fuse (4A) ... 1
Connection cord ... 1 set
Accessory Microphone Unidirectional dynamic type with Talk switch
Impedance : 600Ω
Sensitivity : -53dB (IkHz, 0 dB = 1 V / Pa)

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

 

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 120W
Power Consumption 124W (EN60065), 260W(AC operation at rated output, 8A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:83W (100V)
LOW IMPEDANCE: 4Ω (22V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 10kg

 

XB Series - Intelligent Power

Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.

High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty

TECHNICAL DATA:
XV 400:  2x 200 W / 100 V
Class:  AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD:  < 0.07%
Signal-to-Noise Ratio:  < 101 dB
Channel Seperation:  > 70 dB
Input Sensitivity:  +6 dBu
Input Clipping:  22 dBu
Input Impedance:  20 kOhm
Cooling:  2 to 3 fans (temp. reg. variable speed)
Weight:  17 kg
Dimensions:  2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“)

- SPEAKER SELECT(5ZONE SPEAKER OUTPUT)

Six speaker select switches enable you to select any combination of up to five speakers.

- SELECTABLE PRIORITY MUTING

Switchable audio signal priority for MIC Channels 1, siren, Chime and Telephone input over other input sources.

- MONITOR SPEAKER

You can monitor output signal by using the monitor speaker, and can control the monitor level on front panel by 3 step lever switch.

- ANNOUNCEMENT CHIME

Convenient four-tone chime for use with announcements.

- REMOTE CONTROL INPUT

Individual speaker zones can be selected and chime can be operated by wired remote control.

- EM(EMERGENCY)

When EM switch is pressed in emergencies, EM broadcasting stored in VOICE IC is outputted.

- REMOTE POWER

You can turn on/off amplifier by remote control.

- INDIVIDUAL INPUT GAIN CONTROLS

Rear-panel gain controls for each input channel for total control of individual levels.

- MODULAR DESIGN

Optional modules can be installed in multiple configurations for convenience and ease of use. Choose the PAM-CDA (Compact Disc), PAM-T (AM/FM Tuner) or PAM-D (Cassette Deck) modules to expand the PAM-510/520ʼs audio capabilities.

ACCESSORIES

One detachable AC power cord is provided for use with this product.

PAM-510

PAM-520

Amplifier Section

(Amp In@1kHz,

4Ω Load Output)

Rated Output Power (THD 1%)

120W(RMS)

240W(RMS)

Speaker Zone 1~5 Output

25W MAX

50W MAX

Input Sensitivity/Impedance

1V/20kΩ

S/N

Better than 85dB

Frequency Response

(at 1kHz Half Power Output, ±3dB)

80Hz~18kHz

Mic Input Section

(Mic 1~4 In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

–60dBV/600Ω

S/N

Better than 55dB

Frequency Response (±3dB)

120Hz~10kHz

Tone Control

(Bass:100Hz,Treble:10kHz)

±12dB

Phantom Power

+24VDC

Line Input Section

(Line 1~2 In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

–30dBV/10kΩ

S/N

Better than 65dB

Frequency Response (±3dB)

80Hz~15kHz

Tone Control

(Bass:100Hz,Treble:10kHz)

±12dB

Remote Amp Section

(Remote In@1kHz,

Preamp Out)

Mic Input Sensitivity/Impedance

–60dBV/600Ω

S/N

Better than 55dB

Frequency Response (±3dB)

120Hz~10kHz

Tel In Section

(Tel In@1kHz,

Preamp Out)

Input Sensitivity/Impedance

0.3V/600Ω(USA/Canada)

0.775V/600Ω(EC & Associated)

S/N

Better than 65dB

Frequency Response (±3dB)

330Hz~3kHz

Pre Amp Out(Mic 1~4, Line 1~2, Tel In, Remote In)

0dBV/600Ω

T.H.D

Less than 0.5%

Record Out

–10dBV/3kΩ

Operating Temperature

–10°C~40°C

Power Source

100–120VAC or 220–240VAC; 50/60Hz, 24VDC

Power Consumption (1/8 POWER)

180W

320W

Weight

17kg/37.6lb

19kg/42lb

Dimensions

482(W) x 132(H) x 398(D)mm

19(W) x 5.2(H) x 15.7(D)in

※ Specifications and design subject to change without notice.

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 240W
Power Consumption 238W (EN60065), 520W(AC operation at rated output, 15A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:42W (100V)
LOW IMPEDANCE: 4Ω (31V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 13kg

 

Weight4.00 kg0.90 kg10.00 kg17.00 kg19.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 0.90 kg
Weight 10.00 kg
Weight 17.00 kg
Weight 19.00 kg
Weight 13.00 kg