SENNHEISER SKM-835-XSW-B Handheld Transmitter

219.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Handheld transmitter equipped with e835 cardioid dynamic capsule & mute switch 614–638 MHz. Compatible with the XSW-1 and XSW-2 series receivers

 

Read more

Handheld transmitter equipped with e835 cardioid dynamic capsule & mute switch 614–638 MHz. Compatible with the XSW-1 and XSW-2 series receivers

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “SENNHEISER SKM-835-XSW-B Handheld Transmitter”

Your email address will not be published. Required fields are marked *

Quick Comparison

SENNHEISER SKM-835-XSW-B Handheld Transmitter removeShure FP3 Wireless Plug-In Transmitter (L4 / 638 - 662MHz) removeTOA IR-200M Infrared Wireless Microphone removeSHURE SLX2-BETA87C-R5 Wireless Microphone removeLD Systems LDWS1616BP Belt Pack for WS1616 Series removeSHURE SLX1-R5 - Bodypack Transmitter remove
NameSENNHEISER SKM-835-XSW-B Handheld Transmitter removeShure FP3 Wireless Plug-In Transmitter (L4 / 638 - 662MHz) removeTOA IR-200M Infrared Wireless Microphone removeSHURE SLX2-BETA87C-R5 Wireless Microphone removeLD Systems LDWS1616BP Belt Pack for WS1616 Series removeSHURE SLX1-R5 - Bodypack Transmitter remove
Image
SKUH99SE00340FP3IR-200MSLX2-BETA87CLDWS1616BPSLX1-R5
Rating
Price 219.00 incl. GR VAT 396.80 incl. GR VAT 279.00 incl. GR VAT 451.91 incl. GR VAT 116.70 incl. GR VAT 241.91 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Handheld transmitter equipped with e835 cardioid dynamic capsule & mute switch 614–638 MHz. Compatible with the XSW-1 and XSW-2 series receivers


Product Highlights

    3-pin XLR Input
    Supports Dynamic Microphones (Only)
    24MHz Operation
    Compatible with SLX Series
    960 Selectable Frequencies
    12 Multiple Channels Per Band
    25 Maximum Compatible Channels
    Infrared Sync to Receiver
    Battery Powered with AA Batteries x2


The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.

Specification
Battery IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces).
Current Consumption Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H)
Infrared Emitter
Wavelength 870 nm (AM: Brightness modulation)
Modulation Method Frequency modulation
Carrier Frequency Channel A: 3.100 MHz
Channel B: 3.350 MHz
Transmission Distance Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space)
Tone Signal 32.768 kHz
Modulation Sensitivity ±4.8 kHz (1 kHz, when SPL of 84 dB is input)
Maximum Input Sound Pressure 120 dB SPL
Microphone Unit Unidirectional electret condenser microphone
Frequency Response 100 Hz - 12 kHz
Preemphasis 300 μs
Battery Operation Time Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N)
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 30 % to 85 %RH
Finish Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter
Dimensions φ37 × 241.8 (H) mm (φ1.46" × 9.52“)
Weight 170 g (0.37 lb) (with battery)
Accessory Screw driver (for setting) …1, Color label (6 colors) …1

 

Shure SLX2-BETA87C-R5 Wireless Microphone

Features:

Automatic Transmitter Setup
Backlit LCD with timeout feature
Frequency and power lockout
3-segment battery fuel gauge
2 AA batteries (included) provide 8 hours of continuous use
518 - 782 MHz operating range

Operating Range Under Typical Conditions

100m (300 ft.)

Note: actual range depends on RF signal absorption, reflection, and

interference

Audio Frequency Response (+/? 2 dB)

Minimum: 45 Hz

Maximum: 15 kHz

(Overall system frequency depends on microphone element.)

Total Harmonic Distortion (ref. +/? 38 kHz deviation, 1 kHz tone)

0.5%, typical

Dynamic Range

>100 dB A-weighted

Operating Temperature Range

?18°C (0°F) to +50°C (+122°F)

Note: battery characteristics may limit this range

Transmitter Audio Polarity

Positive pressure on microphone diaphragm (or positive voltage applied

to tip of WA302 phone plug) produces positive voltage on pin 2 (with

respect to pin 3 of low impedance output) and the tip of the high

impedance 1/4-inch output.

SLX1 Bodypack Transmitter

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

Gain Adjustment Range

30dB

Input Impedance

1 MΩ

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

Weight

81 grams (3 oz.) without batteries

Housing

Molded ABS case

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX2 Handheld Transmitter

Audio Input Level

+2 dBV maximum at -10dB position

-8 dBV maximum at 0dB position

Gain Adjustment Range

10dB

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

Dimensions (including SM58 cartridge)

254 mm x 51 mm dia. (10 x 2 in.)

Weight

290 grams (10.2 oz.) without batteries

Housing

Molded PC/ABS handle and battery cup

Power Requirements

2 ?AA? size alkaline or rechargeable batteries

Battery Life

>8 hours (alkaline)

SLX4 Receiver

Dimensions

42 mm H x 197 mm W x 134 mm D (1.65 x 7.76 x 5.28 in.)

Weight

816 g (1 lb. 13 oz.)

Housing

Galvanized steel

Audio Output Level (ref. +/? 38 kHz deviation with 1 kHz tone)

XLR connector (into 600 Ω load): ?13 dBV

1/4 inch connector (into 3000 Ω load): ?2 dBV

Output Impedance

XLR connector: 200 Ω

1/4 inch connector: 1kΩ

XLR output

Impedance balanced

Pin 1: Ground

Pin 2: (+)

Pin 3: (-)

Sensitivity

?105 dBm for 12 dB SINAD, typical

Image Rejection

>70 dB, typical

Power Requirements

12?18 Vdc at 150 mA, supplied by external power supply

 

Product type Wireless Microphone System Accessories


Type Belt Packs
Transmission frequency range 863.000 - 865,000 MHz
Channels 16
Inputs Mini-XLR (3-pin) with phantom power (for headset)
Frequency response 60 - 16.000 Hz
Rated HF output power 10
Controls ASC , Mic / 0dB / -10 dB switch , Power
Indicators power/battery status low (LED)
Operating voltage 2 x AA battery
Operating time >10 h (with alkaline batteries)
Width 65 mm
Height 85 mm
Depth 24 mm
Weight 0,1 kg
Other features incl. batteries , IR frequency synchronisation

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

 

The SLX1 bodypack transmitter is designed to hold up to the most adverse conditions. Whether used with headworn, lavalier, instrument microphones, or with guitars or basses, the SLX1 is the definition of reliability.

  • Automatic Transmitter Setup
  • Backlit LCD with timeout feature
  • Frequency and power lockout
  • 3-segment battery fuel gauge
  • 2 AA batteries (included) provide 8 hours of continuous use
  • 518 - 782 MHz operating range

Audio Input Level

-10 dBV maximum at mic gain position

+10 dBV maximum at 0 dB gain position

+20 dBV maximum at -10 dB gain position

 

Gain Adjustment Range

30dB

 

Input Impedance

1 MΩ

 

RF Transmitter Output

30 mW maximum (dependent on applicable country regulations)

 

Dimensions

108 mm H x 64 mm W x 19 mm D (4.25 x 2.50 x 0.75 in.)

 

Weight

81 grams (3 oz.) without batteries

 

Housing

Molded ABS case

 

Power Requirements

2 "AA” size alkaline or rechargeable batteries

 

Battery Life

>8 hours (alkaline)

 

Weight1.00 kg0.30 kg0.17 kg1.00 kg0.20 kg1.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.00 kg
Weight 0.30 kg
Weight 0.17 kg
Weight 1.00 kg
Weight 0.20 kg
Weight 1.00 kg