SGM POWERLIGHT 1212D ILME 16 DIMMER PACK

Powerlight 1212D is a 12-channel digital dimmer (12A), mounted in a sturdy
metal 3U rack container.All the controls and settings are accessible by means
of the buttons on the front panel and can be monitored on the built-in display.
The on-board microcomputer controls a comprehensive series of functions
(soft patch, channel mode, channel level, pre-heat, equalization curves, etc.).
Powerlight 1212D was designed paying great attention to reliability and adopts
avant-garde technical solutions, including internal self-diagnosis, forced ventilation
with air flow proportional to the temperature and output protection with a thermal
magnetic circuit-breaker on each channel.
Powerlight 1212D can also be used without an external controller: in fact, it's possible
to program 4 different chases with a maximum of 32 steps each.On-board software
can be upgraded via RS-232. Powerlight 1212D is available with a choice of 5 different
connector panels: ILME 24, ILME 16, Cabur, Socapex and Powercon. 

TECHNICAL DATA
12-channel digital dimmer, 12A per channel
Thermal magnetic circuit-breaker fo each channel
7 equalization curves per channel
4 Programmable chases
Switch-on with recoll of previous status
Filter ramp time (peak to peak) 250 micro sec
Software upgrade via DMX
DMX In and link-thru connectors
Automatic frequency selection (50/60 Hz)
110-220V single phase 50/60Hz power supply
380V three phase 50/60hz power supply
Forced air ventilation (Variable)
Overheating protection
Phase connection control
Self-testing with indication of any irregularities
Updatable with programming kit
(CABUR) (ILME 24)
(SOCAPEX) (POWERCON)
Dimensions: L 442 H 133 D400 )
Weight: 18 Kg
 

Zero88 Betapack3 H-W + DMX

Excellent value 6 channel dimmers for multipurpose use

The Betapack 3 range of digitally controlled dimmer packs offer one of the most cost effective and versatile solutions to dimming currently available.

Manufactured to the highest professional standards, this comprehensive range of 6 x 10 Amp packs includes variants with sockets to match most global standards.

The Betapack 3 range is available with MCB?s per channel giving you peace of mind and maximum protection.

The versatility of the Betapack 3 means it can be 19" rack or wall mounted using the brackets supplied or made portable by adding the optional "Easicarry" kit consisting of a handle and four feet. Its legendary reliability and durability make it the dimmer of choice for a huge variety of venues worldwide.

Zero88 Betapack3 CEE17 + DMX

Excellent value 6 channel dimmers for multipurpose use

The Betapack 3 range of digitally controlled dimmer packs offer one of the most cost effective and versatile solutions to dimming currently available.

Manufactured to the highest professional standards, this comprehensive range of 6 x 10 Amp packs includes variants with sockets to match most global standards.

The Betapack 3 range is available with MCB?s per channel giving you peace of mind and maximum protection.

The versatility of the Betapack 3 means it can be 19" rack or wall mounted using the brackets supplied or made portable by adding the optional "Easicarry" kit consisting of a handle and four feet. Its legendary reliability and durability make it the dimmer of choice for a huge variety of venues worldwide.

WD 1215 DMX
 
12 channels digital module dimmer. This dimmer has incorporated a 32 bit high power
microcomputer with aa time processing unit. Each channel can be programmed with the
adress, a control curve, the limitation, the preheat of the lamps and the loadcheck. 12
internal memories. Can be linked with oyher dimmers. Protections: Short circuit, power
failure memory. Alarm of over voltage. Temperature with switch off. Electronic fuse and
loadcheck. 10A per channel. 3 phase connection.
Dimensions: 483x178x436 mm. Weight: 31 Kgs.

Universal power-pack for professional use

Can be operated 1-phase or 3-phase 12 x 10 A

DMX-control or analogue control possible

Synchronisation of several DPX-1210 possible via DMX

The channels can either be dimmed or switched

Adjusting the lamp pre-heat for the dimmed channels

All modes are displayed via LEDs and the display

With automatic circuit breaker per channel

Channel-outputs on the rearpanel via pole connectors

technical specifications:

Power supply: 230-380 V AC, 50 Hz ~

Max. power output: 27600 W

Max. current: 120 A

Number of control-channels: 12

Max. output/channel: 2300 W

Max. current/channel: 10 A

Integrated programs: 12

DMX in / out

Analogue input: 15-pin Sub-D socket, 12 channels, 0/10 V DC

Output sockets: Via pole connectors

Fuse: 12 x F 10 A, 230 V

Dimensions (WxDxH): 482 x 485 x 176 mm

19" mounting dimensions with 4 u

Minimum mounting depth: 500 mm

Weight: 27 kg

Digital Programmable dimmer. 6 DMX channels. 24 programmable scenes.LCD display.
Power failure memory.Each channel can be programmed with preheat level, maximum
output level, control curve and fade time.
Channel output (Single phase) 10A/Ch Total 60A.
Channel output (Three phases) 10 A/Ch Total 20A.