Price | €1,919.00 Original price was: €1,919.00.€1,784.67Current price is: €1,784.67. incl. GR VAT | €1,023.00 Original price was: €1,023.00.€833.73Current price is: €833.73. incl. GR VAT | €773.00 Original price was: €773.00.€718.00Current price is: €718.00. incl. GR VAT | €1,026.00 Original price was: €1,026.00.€954.00Current price is: €954.00. incl. GR VAT | €310.01 Original price was: €310.01.€279.00Current price is: €279.00. incl. GR VAT | €429.00 Original price was: €429.00.€396.80Current price is: €396.80. incl. GR VAT |
Content |
UHF-R handheld transmitters boast a rugged, lightweight construction and an antenna design which advances RF transmission reliability. The transmitter design allows for interchangeable microphone cartridges. The UR2 is offered with BETA 87A, BETA 87C, BETA 58A, SM86, SM87A, SM58, KSM9 and VP68. For use with UHF-R Wireless Systems. UHF-R Wireless features KSM9 as the premier choice in handheld vocal microphones. Switchable RF power Frequency and power lockout Bit-mapped backlit LCD 2 AA batteries -- up to 9.5 hours continuous use Infrared automatic transmitter sync All metal die-cast construction Interchangeable cartridges: SM58, SM86, SM87A, Beta 58A, Beta 87A, Beta 87C, KSM9, and VP68
|
The AEW-T5400a cardioid condenser wireless handheld transmitter features the Artist Elite® AE5400 large diaphragm true condenser cardioid capsule based on the classic AT4050 studio microphone and provides accurate natural response. The capsule shall include internal shock mounts for low handling noise. An internal capsule 6 dB pad provides additional attenuation for extremely high-SPL sources. An integral two-stage pop filter within the rugged steel headcase protects against "p” pops and other breath plosives. All transmitter setup functions are menu-driven via soft-touch controls. To prevent accidental changes, the controls are covered by the transmitterʼs handle case when not being used. A dual-colour power/mute indicator LED provides visual indication of transmitter status. Operating on two standard AA batteries, the transmitter features high and low-level RF output settings. The low-level setting allows two additional hours of battery life while retaining a strong RF signal link. Each transmitterʼs backlit LCD display presents a great deal of setup and operating information clearly and conveniently including: battery fuel remaining, mute, and operating frequency. A flashing "Lo-Batt” alert visually signals the battery life is almost depleted. Programmable power/mute locks limit the functioning of the transmitterʼs power/mute button as desired for particular users and applications. To match the audio input level to the transmitter, a three-position audio input gain setting selected through the function menu is provided. Four nameable user presets allow for storage and recall of commonly used settings. The rugged ergonomic metal body housing with integral antenna will provide years of dependable operation. Each handheld transmitter includes a heavy-duty Quiet-Flex™ stand clamp and soft protective pouch. Artist Elite® AE5400 large diaphragm cardioid condenser capsule with integral shock mount Available in the following frequency bands: 541.500 - 566.375 MHz (C Band) 655.500 - 680.375 MHz (D Band) 721.500 - 746.375 MHz (G Band) 25 kHz frequency spacing makes it easier to find a clear, open frequency in crowded RF environments Two-stage pop filter to protect against "p” pops Dual output power selection to optimize battery life Digital Tone Lock™ squelch to identify the wireless transmitter to the receiver High efficiency dual companding system for flawless audio Function menu displayed in a backlit LCD window and controlled by internal touch switches Four nameable user presets Operates on two AA batteries Battery fuel gauge LCD readout on the body of the microphone Power/mute lock provision Dual-colour power/mute status indictor 18 dB audio input level adjustment Integral capsule 6 dB pad switch Rugged metal housing with integral antenna Supplied with a heavy-duty microphone stand clamp RF Power Output: High: 35 mW; Low: 10 mW, nominal Spurious Emissions: According to National Regulations Dynamic Range: >=110 dB, A-weighted Microphone Element: Cardioid Condenser Batteries: Two 1.5V AA alkaline (not included) Battery Life: Approximately 6 hours (High); 8 hours (Low), depending on battery type and use pattern Dimensions: 239mm long, 50mm diameter Net Weight: 270g Accessory Included: AT8456a Quiet-Flex™ stand clamp
|
Modulation
FM (45 kHz max. deviation)
Frequency Range
470–952 MHz (depending on region)
Tuning Bandwidth
Up to 80 MHz (depending on region)
Antenna
Dipole, UR3 housing and attached microphone form the antenna
Carrier Frequencies
Up to 3200, tunable in steps of 25 kHz (depending on region)
RF Power Output
Selectable 10 mW or 50 mW maximum, depending on region
Power Requirements
Two (2) 1.5V AA alkaline
Battery Life
10 Hours (alkaline) with no phantom power @ 10 mW, typical (frequency band dependent)
4 Hours (alkaline), with 48 V phantom power @ 50 mW, typical (frequency band dependent)
Gain Adjustment Range
-10 to +20 dB, MIC or LINE input setting
Pilot Tone
32 kHz
Frequency Stability
± 0.0015%
Spurious Radiation
75 dB below carrier (typical)
Equivalent Input Noise
-127.0 dBV, A-weighted (audio front end)
Maximum Audio Input level
+24 dBV (LINE input, 0 dB gain)
-21 dBV (MIC input, 0 dB gain)
Differential Input Impedance
6 kΩ LINE input setting
3 kΩ MIC input setting
System Frequency Response
35 Hz–17 kHz, (+1.5 dB, -3 dB)
Note: Overall system frequency response depends on the microphone element and receiver.
High Pass Filter
Two-pole (12 dB per octave), selectable cut off frequency from 40 Hz to 240 Hz
System THD+N
| |
The IR-200M is a handheld infrared wireless microphone. It eliminates problems with interference or eavesdropping, allowing simultaneous use in adjacent conference rooms or school classrooms. Since infrared wireless microphone system uses a frequency band that does not interfere with that of the TS-800 and TS-900 series infrared conference system, both systems can be simultaneously installed in the same location.
Battery | IR-200BT-2 rechargeable battery for the infrared wireless microphone (option)
or AA alkaline dry cell battery (2 pieces). | Current Consumption | Typ. 250 mA (2.4 V, Power selector switch: N)
Typ. 340 mA (2.4 V, Power selector switch: H) |
Infrared Emitter
Wavelength | 870 nm (AM: Brightness modulation) | Modulation Method | Frequency modulation | Carrier Frequency | Channel A: 3.100 MHz
Channel B: 3.350 MHz | Transmission Distance | Approx. 20 m (65 ft) (Power selector switch: H, in an unobstructed space)
Approx. 15 m (50 ft) (Power selector switch: N, in an unobstructed space) | Tone Signal | 32.768 kHz | Modulation Sensitivity | ±4.8 kHz (1 kHz, when SPL of 84 dB is input) | Maximum Input Sound Pressure | 120 dB SPL | Microphone Unit | Unidirectional electret condenser microphone | Frequency Response | 100 Hz - 12 kHz | Preemphasis | 300 μs | Battery Operation Time | Approx. 8 h (when the IR-200BT rechargeable battery for the infrared wireless
microphone is used, Power selector switch: N)
Approx. 6 h (when the alkaline battery is used, Power selector switch: N) | Operating Temperature | 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F) | Operating Humidity | 30 % to 85 %RH | Finish | Control section: ABS resin, metallic gray, paint, 50% gloss
Filter section: Polycarbonate, optical cut filter | Dimensions | φ37 × 241.8 (H) mm (φ1.46" × 9.52“) | Weight | 170 g (0.37 lb) (with battery) | Accessory | Screw driver (for setting) …1, Color label (6 colors) …1 |
|
Product Highlights
3-pin XLR Input
Supports Dynamic Microphones (Only)
24MHz Operation
Compatible with SLX Series
960 Selectable Frequencies
12 Multiple Channels Per Band
25 Maximum Compatible Channels
Infrared Sync to Receiver
Battery Powered with AA Batteries x2
|
Reviews
There are no reviews yet.