| Content | Special educational edition only for students and teachersFor the purchase of educational products you need to provide proof of eligibility.
In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets.
With an applied calibration profile the software sets thefrequency response target to be completely flat across all audible frequencies so youcan make music that sounds great everywhere.
You can also now make custom adjustments to the target curve in real time with the new custom target feature.
With accurate studio reference sound you can seamlessly switch between speakers,headphones, and rooms.
Finally, ensure continuity of your workflow regardless of distance, your gear or set-up.
Key Features
Speaker calibration: save as many profiles as needed
Headphone calibration profiles for 280+ supported models
Custom target: target curve adjustments in real time
Translation Check: simulating 20+ different devices and device types for
accurate mix translation results everywhere without leaving the workstation
3 filter modes: Zero Latency, Mixed and Linear Phase
Additional DSP processing controls: Mono, Dry/Wet and Safe Headroom
MIDI mapping in the SoundID Reference app for various controls
User Presets in the SoundID Reference app for switching quickly between
predefined output device/channel pair combinations
What's Included
SoundID Reference app for Speakers & Headphones
SoundID Reference DAW plugin (AU, VST, AAX)
SoundID Reference Measurement Microphone with an XLR connection and
individual calibration profile
Averaged profiles for 280+ supported headphone models
Activation key for the product license: the product can be activated and used
on 3 machines
System Requirements
Mac: macOS 10.12 or later
PC: Windows 8 (64-bit) or later
Sonarworks supported or Sonarworks individually calibrated headphones
2.0 or 2.1 stereo speaker system
An audio interface featuring +48V Phantom Power and 44.1 kHz sample rate
capability
During the speaker measurement process, the audio hardware setup must
consist only of a single external hardware device
XLR to XLR audio cable
Microphone Specification
Houses a pre-polarized electret-condenser capsule
Frequency response: 20 Hz - 20 kHz with a supplied calibration profile
Omnidirectional polar pattern
Sensitivity is rated at -37 dB/Pa (14 mV)
Self noise: 24 dB
S/N ratio: 70 dB
Dynamic range: 106 dB
Maximum SPL: 132 dB | Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum.
The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels.
The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.
Features
- Frequency response shaped specifically for kick drums and bass instruments
- Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Studio quality performance, even at extremely high sound pressure levels
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high signal–to–noise ratio output
- Low sensitivity to varying load impedance
- Legendary Shure quality and reliability
| Type |
Dynamic (moving coil) |
| Frequency Response |
20 to 10,000 Hz |
| Polar Pattern |
Supercardioid, rotationally symmetrical about microphone axis |
| Output Level |
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL |
| The Shure SM57 unidirectional dynamic microphone is exceptional for musical instrument pickup or for vocals. With its bright, clean sound and carefully contoured presence rise, the SM57 is ideal for live sound reinforcement and recording. It has an extremely effective cardioid pickup pattern which isolates the main sound source while minimizing background noise. In the studio, it is excellent for recording drums, guitar, and woodwinds. For musical instruments or vocals, the SM57 is a consistent choice of professional performers. It is also the standard microphone used on the podium of the U.S. President for over 30 years. Its outstanding performance, legendary reliability, and diversity of application make this "workhorse" the choice of performers, producers, and sound engineers the world over.
- Contoured frequency response for clean, instrumental reproduction and rich vocal pickup
- Professional-quality reproduction for drum, percussion, and instrument amplifier miking
- Uniform cardioid pickup pattern isolates the main sound source while reducing background noise
- Pneumatic shock-mount system cuts down handling noise
- Extremely durable under the heaviest use
- Frequency response: 40 to 15,000 Hz
| Frequency Range |
40 Hz to 15 kHz |
| Impedance |
150 Ohms |
| Load Impedance |
310 Ohms |
| Sensitivity |
56 dBV/Pa (Open Circuit Voltage, 1 kHz) |
| Color |
Gray |
| Mounting |
5/8"-27 Female, Mic Clip (Included) |
| Construction Material |
Steel, Steel Wire Grille |
| Dimensions |
ø: 1.26 x L: 6.18" / ø: 32 x L: 157 mm |
| Weight |
10.02 oz / 284 g |
|
- Especially for tom and snare recording
- Polar pattern: cardioid
- Frequency range: 40 - 18,000 Hz
- Impedance: 350 Ω
- Robust metal chassis
- Incl. special tom holder
- Bag included
- Dimensions: 63 x 41 mm
- Weight: 125 g
|
The D 40 with its solid all-metal body will stand up to the hardships of night-after-night onstage use "with a smile“.
The Varimotion diaphragm deep-drawing process allows the diaphragm itself to be fine-tuned with no need for tuning resonators, leading to a quantum leap in audio performance.
The transducer is protected by a sturdy wire-mesh cap and takes extremely high sound pressure levels with ease.
An integrated stand adapter and standard H 440 mounting bracket for snare drums, tom-toms, etc. make the D 40 a highly versatile tool for use on drums, percussions, wind instruments, and guitar amps.
Musical instruments, Live applications.
Dynamic microphone designed for drums and percussions, wind instruments, and guitar amps
Patented AKG Varimotion diaphragm
Custom built capsule mounting
Spring steel wire-mesh cap
Rugged all-metal body withstands typical tough handling on stage
Type Cardioid
Polar pattern 75 to 20,000 Hz
Sensitivity 4 mV/Pa (-48 dBV)
Max. SPL 144/156 dB SPL (for 1%/3 % THD)
Equivalent noise level 18 dB-A
Impedance =1000 ohms
Connector 3-pin XLR
Finish dark stage blue
Dimensions length 104 mm (4.1 in.) height (incl. stand adapter): 79 mm (3.1 in.) max. dia.: 44 mm (1.7 in.)
Net weight 245 g (8.6 oz.)
|
Type: Black Electret Condenser
Polar Pattern: Uni-Directional
Frequency: 50Hz-16KHz
Sensitivity: -45dB
Output Impedance: 250 Ohm
Mixer Phantom Power: +48V
Ideal for wind & string musical instruments
|
Reviews
There are no reviews yet.