Content | Special educational edition only for students and teachersFor the purchase of educational products you need to provide proof of eligibility.
In less than 20 minutes you can calibrate your existing studio speakers with a SoundID Reference measurement microphone and calibrate your existing headphones with more than 280 headphone calibration profiles already included in the software as ready-to-use presets.
With an applied calibration profile the software sets thefrequency response target to be completely flat across all audible frequencies so youcan make music that sounds great everywhere.
You can also now make custom adjustments to the target curve in real time with the new custom target feature.
With accurate studio reference sound you can seamlessly switch between speakers,headphones, and rooms.
Finally, ensure continuity of your workflow regardless of distance, your gear or set-up.
Key Features
Speaker calibration: save as many profiles as needed
Headphone calibration profiles for 280+ supported models
Custom target: target curve adjustments in real time
Translation Check: simulating 20+ different devices and device types for
accurate mix translation results everywhere without leaving the workstation
3 filter modes: Zero Latency, Mixed and Linear Phase
Additional DSP processing controls: Mono, Dry/Wet and Safe Headroom
MIDI mapping in the SoundID Reference app for various controls
User Presets in the SoundID Reference app for switching quickly between
predefined output device/channel pair combinations
What's Included
SoundID Reference app for Speakers & Headphones
SoundID Reference DAW plugin (AU, VST, AAX)
SoundID Reference Measurement Microphone with an XLR connection and
individual calibration profile
Averaged profiles for 280+ supported headphone models
Activation key for the product license: the product can be activated and used
on 3 machines
System Requirements
Mac: macOS 10.12 or later
PC: Windows 8 (64-bit) or later
Sonarworks supported or Sonarworks individually calibrated headphones
2.0 or 2.1 stereo speaker system
An audio interface featuring +48V Phantom Power and 44.1 kHz sample rate
capability
During the speaker measurement process, the audio hardware setup must
consist only of a single external hardware device
XLR to XLR audio cable
Microphone Specification
Houses a pre-polarized electret-condenser capsule
Frequency response: 20 Hz - 20 kHz with a supplied calibration profile
Omnidirectional polar pattern
Sensitivity is rated at -37 dB/Pa (14 mV)
Self noise: 24 dB
S/N ratio: 70 dB
Dynamic range: 106 dB
Maximum SPL: 132 dB |
The E-602 is a cardioid microphone especially suitable for use with bass drums, bass guitar cabs, tubas and other low frequency instruments.
Frequency Response : 20.....16000 Hz
Sensitivity in free field, no load (1kHz) : 1,0 mV/Pa
Min. terminating impedance : 1000 Ohm
Dimensions : d 60 x 153 mm
Weight : w/o cable 550 g
| Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum.
The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels.
The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring.
Features
- Frequency response shaped specifically for kick drums and bass instruments
- Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
- Studio quality performance, even at extremely high sound pressure levels
- Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
- Hardened steel mesh grille that resists wear and abuse
- Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
- Neodymium magnet for high signal–to–noise ratio output
- Low sensitivity to varying load impedance
- Legendary Shure quality and reliability
Type |
Dynamic (moving coil) |
Frequency Response |
20 to 10,000 Hz |
Polar Pattern |
Supercardioid, rotationally symmetrical about microphone axis |
Output Level |
Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL |
|
The super-cardioid e 609 instrument microphone has been specially developed for miking guitar cabs face on and extremely close to the signal source.
Pick-up pattern : Super-cardioid
Frequency response : 40.....15000 Hz
Sensitivity in free field, no load (1kHz) : 1,5 mV/Pa
Nominal impedance : 350 Ohm
Min. terminating impedance : 1000 Ohm
Dimensions : 55 x 34 x 134 mm
Weight : 140 g
|
Transducer Type: Dynamic
Polar Pattern: Hypercardioid
Microphone Frequency Response: 30 - 20.000 Hz
Connection Type: XLR 3-pin
Made in Germany
Like all members of the M series, the M 88 TG is handcrafted in Germany. The materials and the precise craftsmanship that go into the microphone ultimately create a world-class product, a level of quality that turns an ordinary microphone purchase into a long-term investment.
Perfect for heavy bass Sources
The M 88 TG excels on the kick drum, saxophone and percussions, the result of a balanced sound profile and deep bass tones. It is a must-have for every microphone collection. And why shouldn’t it be when you consider its features? It is both insensitive to high sound pressure levels and feedback resistant thanks to its nearly perfect hypercardioid!
Flexible tool iN The studio
The M 88 TG excels in the studio with the help of its multifaceted flexibility. No matter whether the job involves vocals, horns, guitar amplifiers or drums – the microphone is the perfect choice for the widest range of sources. It is all the result of its exceptionally broad frequency response and rich sound.
|
A high performance mini-condenser for sound reinforcement and recording. Great for instruments or drums. The ultra-uniform pickup pattern provides high gain before feedback and excellent rejection of unwanted noise.
Other features include:
- Mew A98D flexible drum mount
- SPL handling to 160dB
- frequency response of 20 to 20,000Hz and included preamplifier
- shock mount and windscreen
|
Reviews
There are no reviews yet.