Content |
Reveal 5A
The new Tannoy Reveal 5A active near field monitor builds upon the success and
recording industry reputation of the famous original Tannoy Reveal Active. When
launched in the mid nineties, the Reveal Active was widely recognised as the product
that defined the category and has been the active monitor of choice for thousands of
amateur and professional recording, creative composition and postproduction facilities
worldwide.
MAIN FEATURES
From the front:
40mm MDF sculpted baffle ? stiff, heavy and rigid and minimises diffraction.
Recessed drive units flush with the baffle surface ? minimises diffraction.
10 point fixing maximises contact between drive unit and baffle.
Bass unit development using Klippell? analysis equipment to minimise offsets
and linearise the suspension components.
New tweeter has wide band design extending the amplitude response beyond
20kHz audibility to 30kHz to correct the phase response from 8kHz to 14kHz
within the audible band. This preserves the harmonic structure of sounds and
the stability of the stereo image .
Smooth tweeter faceplate contours prevent diffraction and cavity effects.
On/Mute (energy saving mode) via the Tannoy logo push switch.
LED indicator shows Active/Energy Saving modes.
Front mounted volume control for convenient Home Studio and PC/MAC
laptop/desktop use.
From the sides:
18mm MDF cabinet construction provides stiffness and minimises colouration.
Internal construction braces the sides and rear of the cabinet against the rear of the
bass driver to provide a rigid reactive mass for the moving cone assembly. Ensures
fast tight bass response and clear midrange.
Front baffle and rear panel tongued and grooved into the cabinet as a mechanical
interlock for safety if wall mounted.
From the rear:
Double insulated to prevent ground loops ? no safety earth required.
CSA/CE/CCC/CB full safety approvals including China.
Spare fuse in IEC mains connector.
On/Off mains isolator switch.
Substantial heat sinking for long term cool running and 24/7 reliability.
XLR and _? jack Combi connector for balanced input.
TECHNICAL SPECIFICATIONS
PERFORMANCE
Frequency response (1) 65Hz to 30kHz
Max SPL (2) 109dB
Distortion |
PRICE PER UNIT
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer |
| Number | 1 | Basket Ø | 9" (228 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Midrange |
| Number | 1 | Basket Ø | 4.5" (116 mm) | Voice coil Ø | 1" (25 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Midrange | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 32 Hz - 50 kHz | THD > 80 Hz | ≤0.6 % | Long term output | ≥114 dB | Max. peak | ≥124 dB | Crossover frequencies | 350 / 2800 Hz | Input impedance | 10 KOhm | Weight | 34 lb (15,4 kg) | Magnetically shielded | Optional | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
The Twin6 Be is the best seller of the Focal Professional range and the most versatile work tool of the SM6 line. It represents the only necessary solution for recording, mixing and mastering. The image precision, treble definition as well as midrange neutrality are at the heart of its reputation.
The excellent articulation of the bass and midbass registers, even at very high sound levels, makes it an unavoidable reference for engineers who require absolute transparency. Furthermore, the design of the Twin6 Be permits a high SPL while at the same time offering a stable tonal balance. One of the two 6.5" woofers works in large band (midrange – bass) whereas the other reproduces from 40 to 150Hz. This creates a bass that preserves all the signal dynamics, without any masking effect in the midrange, thereby keeping all its neutrality and transparency. Additional control of the bass register is accomplished by fine-tuning on the control plate on the back of the Twin6 Be in order to obtain a perfect mirror configuration with its mate. The Twin6 Be can be installed vertically or horizontally to respond to the space requirements of each studio.
Specifications Frequency response : | 40Hz - 40kHz | Maximum SPL : | 115dB SPL (peak @ 1m) |
Input :
|
Type/Impedance: symmetrical/10 kOhms
Connector: XLR
Sensitivity: Adjustable, +4dBu or -10dBV
| Bass/mid-range : | 2x150W rms, BASH® technology | Treble : | 100W rms, AB class |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
|
Visualization and control :
|
Input sensitivity selector
Mid-range speaker selector (right/left)
Adjustable tweeter and woofer levels by potentiometer
Power on/off
Voltage selector
| warning light : | Power on LED |
Electric supply :
|
Local supply power: 230V (2A fuse)
115V (4A fuse)
Connection: Removable IEC supply wire
| Woofer : | 2x6W4370B Focal "W" composite sandwich cone 6-1/2" (16.5cm) speaker | Tweeter : | TB871, Focal inverted dome tweeter in Beryllium | transducer shielding : | Integral through cancellation magnets or by magnet design | Box : | 7-1/2" (19mm) MDF panels |
Finish :
|
Dark red natural veneering side panels, black body
| Dimensions (HxWxD) : | 9-13/16 x 19-11/16 x 13-3/8 " (250x500x340mm) | Weight : | 30.8lb (14kg) |
|
* Active studio monitors with USB audio interface
* 4.25-inch magnetically shielded, inverted cone, copolymer woofer
* 1-inch silk dome high frequency driver
* 2 x 20 watts of internal stereo power
* Two combination mic and instrument/line inputs
* Two 1/8-inch stereo headphone outputs with level controls
* Includes Cakewalk® Sonar LE music production software
* Mic and instrument/line gain control with clip LED
* 16-bit 44.1kHz/48kHz
* Stereo RCA and 1/8-inch aux inputs
* 2-position switch for no-latency direct stereo and mono monitoring
* Mix control to balance computer and audio sources
* USB and speaker cable included
|
Features of the HR824mk2 Studio Reference Monitor:
- High-resolution Active studio reference monitor
- Ultra-linear frequency response for accurate mix translation
- 8.75 in. high-precision, low-distortion LF transducer
- 1 in. titanium dome, ferrofluid cooled tweeter
- Optimized Waveguide for wide, even sweet zone
- Twin FR Series amps -- 150W for LF / 100W for HF
- Cast aluminum Zero Edge Baffle minimizes diffraction
- Full internal damping eliminates midrange artifacts
- Onboard passive radiator extends bass response to 35Hz
- Acoustic Space, LF roll-off, and HF controls
- Balanced XLR, TRS, and unbalanced RCA inputs
- OmniMount ready for easy wall/ceiling placement
- THX pm3 certified for surround sound applications
- Perfect for High Definition audio, cinema and gaming systems
Dimensions and Weight in PackagingShipping Weight: 41 lbs Shipping Dimensions: 14 x 18 x 22 in
|
PRICE PER UNIT S1X The S1X nearfield monitor delivers high quality sound in a very small cabinet. The S1X has all the critical features of the new SX-Series: the X-ART tweeter in combination with the ADAM designed class A/B amplifier and the HexaCone woofer with optimized magnet/voice-coil systems, driven by premium PWM amplifiers. The smallest reference speaker The combined features of crystal clear resolution, tight and precise low-frequency reproduction and the effortless musical reproduction sets this speaker apart from all conventional designs. The S1X is the first choice in all environments that require high quality within a small space, whether it is a smaller studio, an OB vehicle, or a 5.1 installation. Woofer | | Number | 1 | Basket Ø | 6" (156 mm) | Voice coil Ø | 1.5" (37 mm) | Cone material | HexaCone | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Woofer | 1 | Type | PWM | Amp. power RMS / music | 200 W / 280 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel | | Input Sensitivity (coarse) | ±10 dB | High Shelf EQ > 6 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR | General data | | Panel | Rear | Frequency response | 40 Hz - 50 kHz | THD > 80 Hz | ≤1.5 % | Long term output | ≥103 dB | Max. peak | ≥113 dB | Crossover frequencies | 2200 Hz | Input impedance | 10 KOhm | Weight | 13.2 lb (6 kg) | Magnetically shielded | Optional | Height x Width x Depth | 11.5" (295 mm) x 7" (175 mm) x 10" (260 mm) | Warranty | 5 Years | Delivery contents | Power cord, Manual |
|
Reviews
There are no reviews yet.