TASCAM DR-680 MKII Digital recorder

Features at a glance

• SD/SDHC/SDXC cards used as recording/playback media
• 6 balanced mic/line inputs (1-4: XLR/TRS combo jacks, 5-6: TRS jacks)
• 6 unbalanced outputs (RCA pin jacks)
• COAXIAL digital input and output (S/PDIF, AES/EBU)
• Recording/playback formats: BWF, WAV, MP3
• With BWF format, recording starting times can be stored in files
• 8-track recording at 96kHz/24-bit (BWF, WAV)
6 mic/line inputs and stereo mix recording or 6 mic/line input and digital stereo recording
• Record MP3 files at 96, 128, 192 and 320 kbps
• Record 4-channel MP3 files
From 4 mic/line inputs (XLR/TRS combo jacks) or 2 mic/line inputs and digital stereo inputs
• 2-track recording at 24-bit/192kHz (BWF, WAV)
From 2 mic/line inputs or digital stereo inputs
• Digital inputs and outputs support double speed 96 kHz and quad speed 192 kHz
• Sampling frequencies
44.1, 48, 96, 192 kHz (BWF, WAV) 44.1, 48 kHz (MP3)
• Quantization bit depth: 16/24-bit (BWF, WAV)
• 6 channels of TASCAM HDDA mic preamps for high audio quality with 48V phantom power
• Limiter and low-cut filter available on each mic/line input
• Built-in stereo monitoring mixer for headphone mix and/or recording
• Dual-recording function allows two files to be recorded simultaneously at different levels
• GANG function allows the input gain of multiple channels to be operated simultaneously
• Pre-recording function allows the capture of audio two seconds before recording is started
• Automatic-recording function can start and stop recording automatically in response to the input signal level (−48, −24, −12 or −6 dB)
• Even when multiple tracks are used, all recordings made at the same time can be managed as a single take/file
• Track incrementation allows a recording to be split by creating a new file at the desired point without interrupting recording
• Up to 1000 takes and 5000 files can be recorded on a single card
• Mark function can be used to move to specific points (up to 99 marks per take)
• Wheel can be used to change the playback position
• Repeat playback function
• Panel lock function to prevent misoperation
• Cascade function allows transport control of multiple DR-680MKII units using a master unit
• File name format can be set to use a user-defined word or the date
• High-speed transfer of files to a computer using USB 2.0
• 128×64-dot matrix display with backlight
• Built-in mono speaker with 500mW output
• Headphone output and level control (50mW+50mW/ 32ohm)
• Powered by 8 AA batteries or the included AC adapter
• USB cable and shoulder strap included
• Folding stand convenient for tabletop use
• CS-DR680 carrying case (sold separately)
• AR-DR680 case by Portabrace also available

Apogee makes the direct connection to Pro Tools | HD systems a reality. The Apogee X-HD option card allows for direct connectivity between Pro Tools HD™ systems and Apogee's X-Series or Rosetta 200 converters. The result is an incredibly powerful combination of Digidesign's™Ê¼ Pro Tools software and Apogee's superior conversion and clocking hardware.

• Primary HD port for connecting directly to HD Core or Accel cards.
• Expansion port for daisy-chaining multiple Apogee devices (AD-16X, DA-16X, Rosetta 800 & Rosetta 200)
• Compatible with the latest versions of ProTools
• May be used along side similar interfaces (such as Digidesign 96 I/O, 192 I/O, Prism Dream ADA-8)
• Please note: Not compatible with Pro Tools|HD Native

Stereo Rack Memory Recorder
The UR-2 is a 1 U rack size stereo audio recorder using SD card and USB storage device that is flexibly adapting to the wide variety of playback requirements.
The UR-2 is a new generation stereo memory recorder from Fostex that uses 2 SD cards (SDHC compatible) and USB storage device as the recording media. The recording/ playback file format is BWF (WAV). Its ample playback functions will adapt to the wide variety of playback requirements. It offers high quality recording of up to 24bit/96kHz (in BWF format). Employing FAT 32 disc format, it is easy to process the file transfer to a PC based DAW.
The analog input and output are balanced XLR/+4dBu and un-balanced RCA/-10dBV, the digital input and output complies to AES/EBU and S/P DIF digital signal. It is flexible to be used in the available audio system. The playback function includes Chain Play and Timer Play, it is suitable for live stage performance and sound installation. In addition to the external control via parallel remote with D-Sub 25pin and RS-232C serial remote, a USB keyboard and 10-key keyboard can trigger the instant playback start, which is very useful at a live event, theater and broadcast environments.
The Mic input located on the front panel offers 48V phantom power, it can be used not only for recording but also for speech to be mixed with playback source. Last but not least, its newly employed organic EL display gives an extremely clear visibility. This combined with DC power operation, it serves for outdoor use very well.

MAIN FEATURES
• 2 sets SD card slots and a USB host connector for alternate recording/playback among the different media.
• Stereo or Mono WAV (BWF) recording to SD card (also SDHC) and USB storage device
• Fs: 44.1/48/88.2/96kHz, Quantization: 16/24bit
• High speed file transfer with PC via USB 2.0 (bi-directional)
• Employing FAT32 format, it allows to directly mount the recorded files to PC.
• It adapts to a wide variety of use environment by offering Chain Play and Memory Play.
• Timer Play and Power ON Play enable automatic playback start for such as chime and repetitive announcement, which are convenient in the installation audio industry.
• The play mode list employs CSV file format so that it is easy to edit by a text editor or spread sheet program software on PC.
• 99 Cue points with locate function. Waveform display under Scrub mode offers easy and visual Cue point setting
• Microphone input with P48V available on the front panel. Not only for recording but for speech to be mixed with playback source.
• Analog I/O with balanced XLR and un-balanced RCA pin jacks, Digital I/O with XLR connectors
• An organic EL display offers high visibility.
• Remote transport control via Foot SW, Parallel remote pot (Dsub 25pin) and RS-232C (D-sub 9pin)
• External USB keyboard can be used not only for file name editing but for transport control such as REC and PLAY.

The Apogee X-VID-SYC-GEN Video Expansion Card is designed to fit in the X-Series card slot located in the rear panel of the Apogee Big Ben Master Digital Clock (sold separately). Allows all functions to be controlled from the Big Ben user interface and generates video and provides genlocking function. In genlocking mode the source video-signal will be re-clocked and regenerated, maintaining the same
field and colorburst phase information, but stripped of its line information and replaced by video-black. In slave mode the board will auto-detect the incoming video-standard and configure itself accordingly. The video input is of very high tolerance and will even lock to unstable sources like VCR's.

The Apogee X-VID-SYC-GEN Video Expansion Board has three modes of operation.
•Master mode: The user selects the video format on the frontpanel of the Big Ben. The Big Ben will slave to the generated video signal


•Attended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben will slave to the incoming video signal

•Unattended Slave mode: The video board will be configured to autodetect and genlock to the incoming video. The Big Ben is not clocking to the Video board and therefore both will function independently

• Support for PAL, NTSC and 60 Hz B&W standards
• One composite video input and three composite video outputs
• Can operate as a master black-burst generator
• Can operate as genlocking slave device

Korg D-4 Digital Recording Studio

High-performance recording studio in a
friendly, compact package

Welcome a new member to Korg?s lineup of D-series recorders - acclaimed for their superb audio quality and intuitive ease-of-use. About the same size as a VHS video tape, the D4 Digital Recorder contains built-in effects, rhythms, and a tuner, everything needed to plug in a guitar or mic and start recording right away. Five real-time knobs provide immediate control over numerous functions, including a full array of Korg?s proprietary ?REMS? modeling effects. These same knobs perform double duty as Pan knobs and Record Select buttons; an informative backlit LCD screen keeps it all together. Inside, you?ll find powerful recording and sophisticated editing functions that rival high level models. There?s even a USB connector that makes it easy to transfer song data to a computer. With enormous potential packed into its small size, the D4 is the ideal partner for your creative music life.

Main features
? 4-Track digital recorder features 8 virtual tracks per track, for a total of 32 tracks.
? Two tracks of simultaneous recording.
? High audio quality with extended recording times using MPEG1 Layer 2 compressed recording format.
? XLR and 1/4 inch inputs accommodate both a microphone and/or guitar.
? Intuitive user interface provides plenty of knobs for easy operation.
? Instantly recall frequently-used effect settings, including custom-tailored settings, using the Favorites knob.
? Five knobs (with push-button function) allow for easy effect editing and pan control.
? Full suite of non-destructive editing tools includes punch-in/out, bounce, copy/paste, delete ? even pro-level functions such as time compression/expansion are provided.
? Korg?s proprietary ?REMS? modeling technology delivers 93 effect types that can be used for guitar, insert, master, or final effect processing. There are 100 preset effect programs ready for immediate use, and 100 user program locations.
? High-capacity CompactFlash data storage.
? Transfer data to a computer quickly and easily via the USB connector.
? Built-in mic allows immediate recording on the go.
? 87 Rhythm / metronome patterns and a chromatic tuner are built-in.
? The custom LCD display is backlit for easy visibility - even in dark locations.
? AC adaptor and 64 MB CompactFlash media are included.

A studio that?s just the right size
The D4 is a complete four-track recording studio, providing multi-effects based on Korg?s proprietary ?REMS? modeling technology, and an array of rhythm and metronome patterns to compliment any musical style. Just plug a guitar or microphone into the D-4 and you can begin creating your own song a track at a time. Eight virtual tracks are provided for each track, so you can choose the best take as you build your song. The D4 records directly to CompactFlash using one of three modes ?High Quality, Standard or Economy ? providing extended recording time with great audio quality. CompactFlash cards of up to 2 GB* may be used and each one can store up to 99 songs, recorded and saved in MP2 (MPEG-1 Layer-2) format. A built-in mic lets you make quick musical memos as inspiration comes to you. There?s also a built-in tuner, ensuring that you?ll be in tune whenever you record.

*maximum recording time = 72 hours, single track using Economy mode with a 2 GB CompactFlash.

Simple, easy-to-use controls, including
new ?turn and push? knobs
Despite its compact size, the D4 offers quick and convenient control of its many professional features and rich functionality. A single knob takes you from mode to mode. Five dedicated knobs provide real-time editing of the onboard REMS effects. By pushing down on these same knobs you can select recording status of each track and turn effects on and off. There?s also a ?favorites knob? that lets you instantly recall eleven of your favorite effects. The Value Dial provides a quick way to change settings and select various options. With trim knobs on both inputs (XLR and 1/4" are provided for Input 2, 1/4" only on Input 1), you?ll be able to get the optimum level in any recording situation.

A full suite of editing tools
bring a final polish to your song
The D4 provides the functionality and flexibility you?ve come to expect from Korg digital recorders, including copy, delete, punch-in recording and more. Bounce recording combines multiple tracks into one ? with no loss of fidelity ? and frees up tracks for additional recording. You can also use professional time compression/expansion editing functions to alter previously-recorded phrases so they match the tempo of your song.

“REMS" modeling effect technology
KORG?s proprietary "REMS" (Resonant structure and Electronic circuit Modeling System) modeling technology simulates the audio characteristics of many classic guitar amps, legendary recording microphones and numerous effects with startling realism, adding depth and character to your original recordings. The AMP effect faithfully recreates a range of amps; from classics such as the VOX AC30TB through today?s latest guitar amps. The CABINET effect accurately simulates a wide variety of speaker cabinets that match the various AMP types. The 4-BAND EQ allows you to make detailed adjustments to the tonal character and you can also apply chorus, phaser, and flanger type MODULATION effects. For recording bass parts, the BASS DRIVE and BASS CABINET effects provide a broad spectrum of bass sounds that perfectly simulate the character of various bass rigs. When it comes time to add vocals ? or another acoustic instrument ? the mic simulator recreates the ideal tonality for various recording applications.

What is REMS?
REMS (Resonant structure and Electronic circuit Modeling System) is Korg?s proprietary modeling technology that digitally simulates a wide range of factors that affect sound, including the sound-producing mechanism of acoustic and electric/electronic instruments, the body and cabinet resonances that affect the tone, the spatial character of the sound field in which the sound is heard, the electrical and acoustical response of the mics and speakers that are in the sound-transmission path, and the way in which electrical circuits such as vacuum tubes and transistors affect the tone.

Create multi-effect ?chains? using up to five simultaneous effects
The D4 digital recorder provides four types of effect chains, in which up to five effects can be connected in a specified order. This makes it easy to create multi-effects that are suitable for the material you?re recording. These effect chains are stored as programs, with 100 user and 100 preset locations for easy access. The presets contain programs created by professional musicians and studio engineers and are ready to use. You can edit the effects in a program and store it in the user program area. Four chain types are provided. [GUITAR/MIC] is used when applying effects to a mono input, such as guitar or vocal; [INSERT/GTR+VO] is for use with a stereo input, or when applying separate effects to a vocal track and a guitar track that are being recorded simultaneously; [MASTER] makes the overall sound more consistent; and [FINAL], which applies overall adjustments to the final output stage. A dedicated switch is provided to select each chain type. No complicated operations are required, letting you concentrate on your recording.

High-quality PCM rhythms
Inside the D4 is a PCM sound generator that can produce 87 different rhythm patterns (32 metronome patterns and 55 rhythm patterns). The rich array of patterns include 8 beat, 16 beat, Rock, Funk, Big Beat, House, Reggae, Hip-Hop, R&B, Disco, Dance, Jazz, 3/4, 6/8, 5/4, and 7/4, covering a broad range from simple beats to highly distinctive styles. These rhythm patterns may be used as recording guides, or as an easy way to create tracks.

Reliable, convenient CompactFlash storage
CompactFlash capacities of 16 MB ? 2 GB are supported for data storage.*1*2 The data is written automatically when you?ve finished recording or editing. The D4 also provides a USB connector, so it?s easy to transfer song data and user effect data to your computer for backup.*3 Completed songs created within the D4 as stereo MPEG format*4 song files, can be played back as stereo MPEG files on your computer.*5 This also makes it easy to distribute or exchange data on the Internet.

*1 One (1) 64 MB CompactFlash card containing demo song data is included.
*2 CF TYPE I cards only. CF TYPE II cards are not supported.
*3 USB connection requires Windows 2000/Me or later, or Mac OS 9.0.4 or later. If your computer does not have a USB connector, you can still use a card reader/writer to backup data that?s stored on the card.
*4 MPEG1 Layer2 format.
*5 Windows Me, Windows 2000, Mac OS 9.0.4, or later systems are supported - when using a PC with an audio card that supports 32 kHz.

Designed for Windows based Pro Tools systems, the affordable Digidesign Pro Tools Custom Keyboard WIN let users work faster in their Pro Tools environment by providing direct access to primary transport and editing functions.

The Digidesign Pro Tools Custom Keyboard use the same symbols and color coding system built into the keyboards on the ICON D-Control worksurface and the other Digidesign control surfaces while retaining all the conventional alphanumeric labels that appear on standard computer keyboards. The Digidesign Pro Tools Custom Keyboard provides plug-and-play USB connectivity and offers a fresh new look at a lower price than ever before. The keyboard also supports a PS-2 connection for maximum compatibility.

Digidesign Pro Tools Custom Keyboard WIN Features

• Text and icons for main Pro Tools custom key commands, in addition to standard keyboard alphanumeric lettering
• Windows - PS-2 connection cord and USB adapter for easy connection with either method