TOA N-8000CO C/O Interface Unit

1,674.38 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Upon Request Upon Request SKU: N-8000CO Category:
The N-8000CO is a C/O interface unit designed for use with TOA’s packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line. Connecting the unit to the LAN permits […]

 

Read more

The N-8000CO is a C/O interface unit designed for use with TOA’s packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line. Connecting the unit to the LAN permits paging calls through analog subscriber line to be made and the equipment connected to the N-8000MI and N-8000DI to be controlled. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.

Specification
Power Source 220 – 240 V AC, 50/60 Hz
Power Consumption 7 W (max.)
Line Public Switched telephone networks
Number of lines: 1 line
Selective signal type: DTMF signal
Signal system: Compatible with loop start signaling
Wiring method: 1 pair of twisted pair cables
Network Section Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (simultaneous paging to up to 8 zones)
Multicast (simultaneous paging to up to 191 zones)
Connector: RJ45 connector
Indication Network LNK/ACT indication, Status lamp, Power-on indication lamp,
Line in-use lamp
Other Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel)
Setting Method Rack, Desk, Surface mount
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Pre-coated steel plate, black, 30 % gloss
Dimensions 210 (W) × 44.3 (H) × 267 (D) mm (8.27″ × 1.74″ × 10.51“)
Weight 1.7 kg (3.75 lb)
Accessory Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Mini-clamp plug (2 pins)…2, Plastic foot…4, Screw for fitting plastic foot…4
Option Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000CO unit)
MB-15B-J (for rack mounting two N-8000CO units)
Wall mounting bracket: YC-850

 

Weight 1.70 kg

Reviews

There are no reviews yet.

Be the first to review “TOA N-8000CO C/O Interface Unit”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA N-8000CO C/O Interface Unit removeBaofeng TR-818UV UHF/VHF/FM Wireless Walkie Talkie Dual Band Transceiver 8W removeTOA N-8000AF AUDIO INTERFACE UNIT removeTOA N-8011MS Standard Hands-Free Master Station removeTOA N-8000AL Telephone Interface Unit removeBAOFENG UV-82 UHF/VHF Wireless FM Transceiver Dual Band remove
NameTOA N-8000CO C/O Interface Unit removeBaofeng TR-818UV UHF/VHF/FM Wireless Walkie Talkie Dual Band Transceiver 8W removeTOA N-8000AF AUDIO INTERFACE UNIT removeTOA N-8011MS Standard Hands-Free Master Station removeTOA N-8000AL Telephone Interface Unit removeBAOFENG UV-82 UHF/VHF Wireless FM Transceiver Dual Band remove
Imagebaofeng_tr_818uv_mayro walkie talkie 8wBaofeng UV-82 UHF VHF Wireless FM Transceiver Dual Band
SKUN-8000COTR-818UVN-8000AFN-8011MSN-8000ALUV-82
Rating
Price 1,674.38 incl. GR VAT 40.92 incl. GR VAT 1,488.38 incl. GR VAT403.08 incl. GR VAT 1,798.38 incl. GR VAT 45.88 incl. GR VAT
Stock

Available on backorder

Out of stock

Available on backorder

Available on backorder

Available on backorder

Only 1 left in stock (can be backordered)

AvailabilityAvailable on backorderOut of stockAvailable on backorderAvailable on backorderAvailable on backorderOnly 1 left in stock (can be backordered)
Add to cart

Add to cart

Read more

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Transceiver dual band VHF/UHF
  • Features a large backlit display with dual frequency indication V/U, U/V, U/U and V/V
  • With FM radio receiver and LED flashlight
  • Comes with belt clip and hand strap
  • Also communicates with PMR frequencies
  • Frequency range: 136-174 and 400-520MHz
  • Frequency coverage: FM radio (receive only), VHF/UHF
  • Number of memories: 128
  • Frequency stability: 2.5ppm
  • Tuning step: 2.5/5/6.25/10/10/12.5/25KHz
  • Antenna impedance: 50Ωm
  • Operating temperature: -20°C to +60°C
  • Power supply: 7.4V/2800mAH LiOn 7.4V/2800mAH battery
  • Power consumption at reception: <380mA
  • Power consumption in transmit: <1.4Α
  • Consumption in standby: <75mA
  • Operating modes: One-way or half-directional
  • Operating cycle: 3/3/54 minutes (receive/transmit/standby)
  • Output power: up to 5/1 Watt
  • Configuration: FM
  • Audio output: 100mW
  • Dimensions (W x H x W): 58 x 110 x 32 mm
  • Weight: 130 g
Content

The N-8000CO is a C/O interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog central office line circuit, allowing the intercom station to make and receive calls to and from the telephone line. Connecting the unit to the LAN permits paging calls through analog subscriber line to be made and the equipment connected to the N-8000MI and N-8000DI to be controlled. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.

Specification
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption 7 W (max.)
Line Public Switched telephone networks
Number of lines: 1 line
Selective signal type: DTMF signal
Signal system: Compatible with loop start signaling
Wiring method: 1 pair of twisted pair cables
Network Section Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (simultaneous paging to up to 8 zones)
Multicast (simultaneous paging to up to 191 zones)
Connector: RJ45 connector
Indication Network LNK/ACT indication, Status lamp, Power-on indication lamp,
Line in-use lamp
Other Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel)
Setting Method Rack, Desk, Surface mount
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Pre-coated steel plate, black, 30 % gloss
Dimensions 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51“)
Weight 1.7 kg (3.75 lb)
Accessory Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Mini-clamp plug (2 pins)…2, Plastic foot…4, Screw for fitting plastic foot…4
Option Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000CO unit)
MB-15B-J (for rack mounting two N-8000CO units)
Wall mounting bracket: YC-850

 

Two Way Radio BaoFeng TR-818 Walkie Talkie Tri-band UHF/VHF Transceiver

1. Frequency Range: 136-174 / 400-520 MHz 2. Dual-Band Display, Dual Freq. Display, Dual-Standby 3. Output Power: 8Watts(max) 4. 128 Channels 50 CTCSS and 104 DCS 5.Battery:2800mAh 6. FM Radio (65.0MHz-108.0MHz) 7. 1750Hz Brust Tone 8. Built-in VOX Function 9. LED Flashlight 10. Large LCD Display 11. High /Low RF Power Switchable 12. 25KHz/12.5KHz Switchable 13. Emergency Alert 14. Low Battery Alert 15. Battery Saver 16. Time-out Timer 17. Keypad Lock 18. Monitor Channel 19. Channel Step: 2.5/5/6.25/10/12.5/25KHz 20. ROGER SET Package Contain: 1× baofeng TR-818UV Dual band radio 1× 7.4V 2800mAh Li-ion Battery Pack 1× Dual Band Portable Antenna 1× Battery Belt Clip 1× Desktop Charger with AC adapter 1× Hand strap 1× English Manual 1x Free Earphone 1x USB Charger  

The N-8000AF is an Audio interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has an analog audio input and output, a time synchronization contact input, and each 8 contact inputs and outputs. Connecting the unit to the LAN permits recording of conversations, chime broadcast at regular intervals (time signal) and paging broadcast to be realized. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.

Specification
* 0 dB = 1 V
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption 7 W (max.)
Audio Input 1 input (transformer isolated), -58 dB* to 0 dB*, 2 kΩ, balanced
(MIC/LINE input, controllable on the software)
with input volume control knob, removable terminal block (3 pins)
Audio Output 1 output (transformer isolated), 0 dB*, 600 Ω, balanced, removable terminal block (3 pins)
Contact Input 8 inputs, no-voltage make contact input, open voltage: 24 V DC,
short-circuit current: 5 mA or less, removable terminal block (10 pins),
(1 common terminal for 4 inputs)
Contact Output 8 outputs, relay contact output, contact capacity: 24 V DC/2 - 500 mA,
removable terminal block (16 pins)
Time Sync Input 1 input, no-voltage make contact input, open voltage: 24 V DC,
short-circuit current: 5 mA or less, removable terminal block (2 pins)
Network Section Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (simultaneous paging to up to 8 zones)
Multicast (simultaneous paging to up to 191 zones)
Connector: RJ45 connector
Voice sampling frequency: 16 kHz, 8 kHz (controllable on the software)
Quantifying bit number: 16-bit
Voice encoding method: Sub-band ADPCM, Cryptosystem
Voice packet loss recovery: Silence insertion
Audio delay time: 80 ms, 320 ms (controllable on the software)
Indication Network LNK/ACT indication, Status lamp, Power-on indication lamp, Signal lamp, Peak lamp
Other Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel)
Setting Method Rack, Desk, Surface mount
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Pre-coated steel plate, black, 30 % gloss
Dimensions 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51“)
Weight 1.7 kg (3.75 lb)
Accessory Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Removable terminal plug (2 pins)…1, Removable terminal plug (3 pins)…2,
Removable terminal plug (5 pins)…2, Removable terminal plug (8 pins)…2,
Plastic foot…4, Screw for fitting plastic foot…4
Option Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AF unit)
MB-15B-J (for rack mounting two N-8000AF units)
Wall mounting bracket: YC-850

 

This Master Station is designed to connect to the IP Intercom Exchange, and provides hands-free conversation of high sound quality. With its space-saving design, this Master Station features the same functions as the Standard Master Station. This station can be mounted to the wall using an optional YC-290 wall mounting bracket.

Specification
* 0 dB = 1 V
Power Source 48 V DC (supplied from the IP intercom exchange (option))
Power Consumption 1.8 W (at rated), 2.4 W (max.)
Wiring Method Non-polar one pair stranded wire system
Transmission System 2 wire 160 kbps echo canceller transmission system
Signal Level Under 0 dB*
Speech Method Hands-free conversation
Audio Frequency Range 300 - 7,000 Hz
Transmission Range Max. 1500 m (φ0.65 mm, Loop resistance 170 Ω)
Hands-free Speaker: 5.7 cm cone-type, 0.6 W, 8 Ω
Microphone: Omni-directional electret condenser microphone
Line Connecting Terminal RJ11 modular jack
Installation Method Desk/Surface mounted master station
(When mounting to the wall, use the optional YC-290.)
Operating Temperature 0℃ to +40℃
Operating Humidity Under 90% RH (no condensation)
Finish Body: ABS resin, gray
Dimensions 92 (W) x 195 (H) x 56.1 (D) mm
Weight 400 g
Accessory Connection cord (3 m)…1
Option Wall mounting bracket: YC-290

 

The N-8000AL is a Telephone interface unit designed for use with TOA's packet intercom system (IP network-compatible intercom system) that employs the packet audio technology. It has a single telephone line interface, allowing an analog telephone to be connected. Connecting the unit to the LAN permits the analog telephone to be operated in the same manner as the intercom master station. It can be mounted in an EIA equipment rack (1U size) with the use of an optional rack mounting bracket or installed on a wall using an optional wall mounting bracket.

Specification
Power Source 220 - 240 V AC, 50/60 Hz
Power Consumption 8 W (max.)
Line Number of lines: 1 line
Selective signal type: DTMF signal
Monitoring function: Line Loop detection
Control function: Caller ID function
Wiring method: 1 pair of twisted pair cables
Network Section Network I/F: 10BASE-T/100BASE-TX (Automatic-Negotiation)
Auto MDI/MDI-X compatible
Network protocol: TCP/IP, UDP, HTTP, RTP, ARP, ICMP, IGMP
Audio packet transmission system: Unicast (simultaneous paging to up to 8 zones)
Multicast (simultaneous paging to up to 191 zones)
Connector: RJ45 connector
Indication Network LNK/ACT indication, Status lamp, Power-on indication lamp,
Line connection indication lamp
Other Firmware update function, System data hold function, Time of day hold facility,
Reset switch (front panel)
Setting Method Rack, Desk, Surface mount
Operating Temperature 0 ℃ to +40 ℃ (32 ゜F to 104 ゜F)
Operating Humidity 90 %RH or less (no condensation)
Finish Pre-coated steel plate, black, 30 % gloss
Dimensions 210 (W) × 44.3 (H) × 267 (D) mm (8.27" × 1.74" × 10.51“)
Weight 1.7 kg (3.75 lb)
Accessory Power cord (2 m (6.56 ft))…1, CD (for PC setting, maintenance use)…1,
Mini-clamp plug (2 pins)…2, Plastic foot…4, Screw for fitting plastic foot…4
Option Rack mounting bracket: MB-15B-BK (for rack mounting one N-8000AL unit)
MB-15B-J (for rack mounting two N-8000AL units)
Wall mounting bracket: YC-850

 

Baofeng UV-82 Wireless Professional Transceiver Dual Band Vhf-Uhf

The Baofeng is one of the leading high quality 2 frequency VHF-UHF transceiver with a power of 8 watts, it is suitable for various sports, hotels, construction sites and all uses that we need to have long distance communication. The Baofeng UV-82 has a large illuminated display with dual frequency indication,also has an FM radio receiver but also a Led flashlight.The battery is Lion (Lithium) high capacity 2800mAH and charges with the automatic desktop quick charger that is inside the package. The Baofeng UV-82 is also programmable by computer using a special cable (sold separately) and comes with a belt clip, hand strap, Greek instructions and microphone. Its use requires a radio amateur license. Baofeng can be used:
  • Construction sites (Construction, Shipyards, Mining etc.)
  • Security Services (Fire Brigade, Police, Security, Airports, etc.)
  • Police, Security, Security, Airport, Security, Airport Security, Security, Security, Security, Security, Fire, Security, Security, Fire Brigade, Security, Security, etc.)
  • Voluntary groups (Firefighting, Rescue, Care, etc.)
  • Transport (Taxi, Trucks, Convoys, Trains, Buses, etc.)
  • Sports (Cycling, Running, Track and Field, etc.)
  • Aerobatics (Parachuting, Parapente, Paragliding, Skydiving etc.)
  • Outdoor activity (Hunting, Fishing, Camping, Hiking, Mountaineering, Trail Running, Skiing, etc.)
  • Tourism (Guiding, Hotels, etc.)
  • On Boat (Sailing, Fishing, Fishing, Water Sports etc.)
  • On the Bike (Driver/Passenger Intercom, Driving Schools, etc.)
  • In the Car (Speed Racing, Vehicle Convoy, etc.)
 
Weight1.70 kg1 kg1.70 kg0.40 kg1.70 kg0.5 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.70 kg
Weight 1 kg
Weight 1.70 kg
Weight 0.40 kg
Weight 1.70 kg
Weight 0.5 kg

Recently Viewed Products