| Content |
The T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ω up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently..
* 0 dB = 1 V | Power Source | +24 V DC, -24 V DC, +6 V DC | | Current Consumption | 35 mA (at +24 V DC), 35 mA (at -24 V DC), 60 mA (at +6 V DC) | | Output | 2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω, electronically-balanced,
removable terminal block (3 pins) | | Frequency Response | 20 - 20,000 Hz, +1, -3 dB | | Total Harmonic Distortion + N | 0.005% (at 1 kHz, 20 - 20,000 Hz BPF, 5 V output, 10 kΩ load) | | S/N Ratio | Over 73 dB (at 20 - 20,000 Hz BPF) | | Residual Noise | Under -91 dB (at 20 - 20,000 Hz BPF, VOL: -70 dB) | | Cross Talk | Over 87 dB (at 20 kHz) | | D/A Converter | 24 bit DAC | | Sampling Frequency | 48 kHz | | Tone Control | Bass: ±12 dB (at 100 Hz)
Treble: %%p12 dB (at 10 kHz) | | Parametric Equalizer | 10 bands, Frequency: 20 - 20,000 Hz, 31 steps, Variable range: ±12 dB,
Q: 0.3 - 5 | | Speaker Equalizer | 15 (compatible with TOA speakers only) | | High-pass Filter | -12 dB/oct, Variable frequency range: 20 - 400 Hz, 14 steps | | Low-pass Filter | -12 dB/oct, Variable frequency range: 4,000 - 20,000 Hz, 8 steps | | Compressor | Depth: 1 - 5 | | Delay | 0 - 40 ms (1 ms step), maximum 40 ms (CH 1 + CH 2), mixer mode only | | Operating Temperature | -10℃ to +40℃ | | Finish | Panel: Aluminum, hair-line | | Dimensions | 35 (W) × 78 (H) × 91.5 (D) mm | | Weight | 82 g | | Accessory | Removable terminal plug (3 pins) …2, Module mounting screw …2 |
|
Emergency combination system. Ενσωματώνεται σε σύστημα συναγερμού φωτιάς. Ενσωματωμένο πυκνωτικό μικρόφωνο για Επείγουσα Αναγγελία, Εξωτερική αυτόματη αναγγελία με αρχείο φωνής, Επιλογέας δοκιμής. Ρύθμιση έντασης εξόδου, Βάρος 4,6kg. Διαστάσεις (WxHxD): 482X88X380mm |
The RM-210 is an extension unit for increasing the number of function keys of TOA's RM-200M, RM-200XF and RM-200X Remote Microphones.
| Specification |
|
|---|
| Current Consumption | 20mA max. (in terms of RM-200M's DC power input 75mA max. (interms of DC power inputs of RM-200X and RM-200XF) | | Connection | Connection to RM-200M, RM-200X or RM-200XF by way of dedicated Cable | | Number of Function | Keys 10 | | Function | When used to expand the RM-200M:
Selects and activates the Voice Announcement Board messages.
When used to expand the RM-200X and RM-200XF (PC software setting):
Emergency activation, emergency reset, BGM pattern selection, EV message activation, broadcast zone selection, monitor zone selection, chime activation, Talk switch activation, control output activation, input volume adjustment, zone volume adjustment, and failure output indication and reset. | | Finish | ABS resin, bluish gray (PANTON 538 or its equivalent) | | Dimensions | 110 (W) x 76.5 (H) x 215 (D)mm | | Weight | 350g | | Accessory | Extension cable x 1, Linkage bracket A x 1, Linkage bracket B x 1, Screw for linkage bracket x 12 |
|
toa-at-100upr Build-in Attenuator with Relay
Toa - 100V installation
Build-in Attenuator with Relay 100 W / 100 V
|
This model should be used with concerning equipment (emergency switcher-our model ES-9116, matrix-our model PX-9116, emergency panel-our model EP-9216). Specification | Brand | InterM | | Model | RG-9116 | | Features | Speaker line switching; broadcasting status indicators (LED). | | Power supply | 24V DC | | Dimensions | 482 x 44 x 280 mm | | Weight | 3,8 kg | | Warranty | 12 months |
|
| | - SYSTEM POWER CONTROL You can control the power of your system by using this model. - AC AND DC POWER SUPPLY You can distribute AC and DC power through the AC outlet and DC terminals on the rear panel. - USE OF EMERGENCY POWER SUPPLY For emergency equipment power supply, an extra DC terminal is provided. - REMOTE CONTROL You can control the system power by remote control function even though the power switch on front is off. - AC AND DC VOLT METER This model uses digital volt meter displays of AC and DC. - OPERATING MODE DISPLAY You can easily check the operating mode by LEDs, AC or DC operating and emergency power. | | | | | | PD-659 | | AC Outlet | Switched 2000W ⅹ3 | | Unswitched 700W ⅹ1 | | Remote Control | 1 | | DC Power Output | DC 24V 5A | | Operation Temperature | -10℃~+40℃ | | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied ACmains transformer depends on country requirements) | | Power Consumption | 190W | | Weight(SET) | 6.2Kg/13.6Ib | | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | | ※ Specifications and design subject to change without notice. | | | |
|
Reviews
There are no reviews yet.