TOA T-001T Dual Line Output Expansion Module with DSP

87.00 incl. GR VAT

Available on backorder

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
The T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ω up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently.. Specification * 0 dB = 1 V Power Source +24 V DC, -24 […]

 

Read more

The T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ω up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently..

Specification

* 0 dB = 1 V

Power Source +24 V DC, -24 V DC, +6 V DC
Current Consumption 35 mA (at +24 V DC), 35 mA (at -24 V DC), 60 mA (at +6 V DC)
Output 2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω, electronically-balanced,
removable terminal block (3 pins)
Frequency Response 20 – 20,000 Hz, +1, -3 dB
Total Harmonic Distortion + N 0.005% (at 1 kHz, 20 – 20,000 Hz BPF, 5 V output, 10 kΩ load)
S/N Ratio Over 73 dB (at 20 – 20,000 Hz BPF)
Residual Noise Under -91 dB (at 20 – 20,000 Hz BPF, VOL: -70 dB)
Cross Talk Over 87 dB (at 20 kHz)
D/A Converter 24 bit DAC
Sampling Frequency 48 kHz
Tone Control Bass: ±12 dB (at 100 Hz)
Treble: %%p12 dB (at 10 kHz)
Parametric Equalizer 10 bands, Frequency: 20 – 20,000 Hz, 31 steps, Variable range: ±12 dB,
Q: 0.3 – 5
Speaker Equalizer 15 (compatible with TOA speakers only)
High-pass Filter -12 dB/oct, Variable frequency range: 20 – 400 Hz, 14 steps
Low-pass Filter -12 dB/oct, Variable frequency range: 4,000 – 20,000 Hz, 8 steps
Compressor Depth: 1 – 5
Delay 0 – 40 ms (1 ms step), maximum 40 ms (CH 1 + CH 2), mixer mode only
Operating Temperature -10℃ to +40℃
Finish Panel: Aluminum, hair-line
Dimensions 35 (W) × 78 (H) × 91.5 (D) mm
Weight 82 g
Accessory Removable terminal plug (3 pins) …2, Module mounting screw …2

 

Weight 0.82 kg

Reviews

There are no reviews yet.

Be the first to review “TOA T-001T Dual Line Output Expansion Module with DSP”

Your email address will not be published. Required fields are marked *

Quick Comparison

TOA T-001T Dual Line Output Expansion Module with DSP removeTOA AT-303P Attenuator 30 watt, 5 step attenuation removeINTER-M PT-9107SD - Rack-Mountable Stereo/Mono AM/FM Tuner removeINTER-M RG-9116 RELAY GROUP removeTOA RM-300MF Fireman's Microphone removeTOA RM-320MF Fireman's Microphone remove
NameTOA T-001T Dual Line Output Expansion Module with DSP removeTOA AT-303P Attenuator 30 watt, 5 step attenuation removeINTER-M PT-9107SD - Rack-Mountable Stereo/Mono AM/FM Tuner removeINTER-M RG-9116 RELAY GROUP removeTOA RM-300MF Fireman's Microphone removeTOA RM-320MF Fireman's Microphone remove
Image
SKUT-001TAT-303PPT-9107SDRG-9116RM-300MFRM-320MF
Rating
Price 87.00 incl. GR VAT 44.71 incl. GR VAT 231.86 incl. GR VAT 252.02 incl. GR VAT 840.00 incl. GR VAT 287.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

The T-001T is a plug-in module designed for use with the 9000 Series amplifiers and can provide two independent balanced outputs. It can drive load of 600 Ω up to +16 dB. It can process effect for TONE/EQ/COMPRESSOR to two outputs independently..

Specification
* 0 dB = 1 V
Power Source +24 V DC, -24 V DC, +6 V DC
Current Consumption 35 mA (at +24 V DC), 35 mA (at -24 V DC), 60 mA (at +6 V DC)
Output 2 channels, max. +20 dB* (at 10 kΩ load), 600 Ω, electronically-balanced,
removable terminal block (3 pins)
Frequency Response 20 - 20,000 Hz, +1, -3 dB
Total Harmonic Distortion + N 0.005% (at 1 kHz, 20 - 20,000 Hz BPF, 5 V output, 10 kΩ load)
S/N Ratio Over 73 dB (at 20 - 20,000 Hz BPF)
Residual Noise Under -91 dB (at 20 - 20,000 Hz BPF, VOL: -70 dB)
Cross Talk Over 87 dB (at 20 kHz)
D/A Converter 24 bit DAC
Sampling Frequency 48 kHz
Tone Control Bass: ±12 dB (at 100 Hz)
Treble: %%p12 dB (at 10 kHz)
Parametric Equalizer 10 bands, Frequency: 20 - 20,000 Hz, 31 steps, Variable range: ±12 dB,
Q: 0.3 - 5
Speaker Equalizer 15 (compatible with TOA speakers only)
High-pass Filter -12 dB/oct, Variable frequency range: 20 - 400 Hz, 14 steps
Low-pass Filter -12 dB/oct, Variable frequency range: 4,000 - 20,000 Hz, 8 steps
Compressor Depth: 1 - 5
Delay 0 - 40 ms (1 ms step), maximum 40 ms (CH 1 + CH 2), mixer mode only
Operating Temperature -10℃ to +40℃
Finish Panel: Aluminum, hair-line
Dimensions 35 (W) × 78 (H) × 91.5 (D) mm
Weight 82 g
Accessory Removable terminal plug (3 pins) …2, Module mounting screw …2

 

Five attenuation settings (OFF, 0/-6/-12/ -16dB), over an input range from 0.5W to 30W.

The PT-9107SD from Inter-M Americas is a high-quality, single rack space digital AM/FM tuner ideal for use in restaurants, retail, offices, and more. It offers both mono and stereo outputs for compatibility with a variety of sound systems. A front-panel display shows information for channel, band, memory, and tuning. Up to twenty stations may be pre-set so your favorites are never more than a click away.

The tuner has a Digi-Link function for remote control. AC and DC power inputs are provided so that emergency 24VDC power may be connected if needed. The PT-9107SD is a great choice for applications needing a high-quality, easy-to-use rack-mountable tuner.

• Single rack space AM/FM tuner • Stereo and mono outputs • Fixed and variable outputs • Front-panel display screen • Stores up to 20 presets • Digi-Link function for remote control • Auto scan  SPECIFICATIONS: Tuning RangeFM: 87.5 - 108MHz
AM: 522 - 1611kHz SensibilityFM: Less than 3uV
AM: Less than 100uV Signal to Noise RatioFM: Greater than 65dB
AM: Greater than 40dB Total Harmonic Distortion (THD)FM: 0.3%
AM: 1% Output LevelFM Mono Balanced: 1V
FM Stereo Balanced: 500mV
AM Mono Balanced: 240mV Controls1 x Power Switch
1 x Memory Button
1 x Preset Button
1 x Mode Preset/Tune Button
10 x Preset Recall Buttons
1 x Volume Control Knob
1 x Mono/Stereo Button
1 x AM Selector Button
1 x FM Selector Button
1 x Up Button
1 x Down Button
1 x Reset Button (Rear Panel) Connectors1 x AC Power In
1 x DC Power In
1 x Fixed Output Connector
1 x Mono Variable Output Connector
1 x Stereo Variable Output Connector
1 x AM Antenna Connector
1 x FM Antenna Connector
1 x Digi-Link Connector Power Source100/120/230/240VAC, 50/60HZ
24VDC Power Consumption11W Dimensions (WxHxD)19 x 1.75 x 11" (483 x 44 x 280 mm) Weight7.7 lbs (3.5 kg)  
This model should be used with concerning equipment (emergency switcher-our model ES-9116, matrix-our model PX-9116, emergency panel-our model EP-9216). Specification
Brand InterM
Model RG-9116
Features Speaker line switching; broadcasting status indicators (LED).
Power supply 24V DC
Dimensions 482 x 44 x 280 mm
Weight 3,8 kg
Warranty 12 months

The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.

Specification
Power Source 24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system)
Current Consumption 120 mA (RM-300MF), 660 mA (with 3 RM-320F connected)
Frequency Response 200 Hz - 15 kHz
Distortion 1 % or less
S/N Ratio 55 dB or more
Microphone Unidirectional dynamic microphone with talk key, compressor (on/off switchable)
Volume Control Microphone volume control, Buzzer volume control
Connection Cable Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal
Maximum Cable Distance Total 800 m (874.89 yd)
No. of Connectable RM-320F Max. 3 units
Operation Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch
Indicator Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator
Operating Temperature -5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)
Operating Humidity 5 % to 95 %RH (no condensation)
Finish ABS resin, blueish gray (PANTONE 538 or its equivalent)
Dimensions 200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“)
Weight 1.1 kg (2.43 lb) (with wall mounting bracket unit)
Accessory Wall mounting bracket unit …1, Wall mounting screw …2

 

 

The RM-300MF Fireman's Microphone is designed for exclusive use with the VM-3000 Series. It is equipped with an emergency activation key, permitting pre-recorded evacuation and alert announcements to be activated, and microphone announcement to be made in emergency situations. By connecting the RM-320F Fireman's Microphone Extension to the RM-300MF, the number of function keys can be expanded. The zone selection or failure acknowledgment function can be assigned to such function keys.

 

 

Power Source

24 V DC (operating range: 15 - 40 V DC, supplied from the VM-3000 system)

Current Consumption

120 mA (RM-300MF), 660 mA (with 3 RM-320F connected)

Frequency Response

200 Hz - 15 kHz

Distortion

1 % or less

S/N Ratio

55 dB or more

Microphone

Unidirectional dynamic microphone with talk key, compressor (on/off switchable)

Volume Control

Microphone volume control, Buzzer volume control

Connection Cable

Main line: Shield CPEV cable (each one pair of Audio line, Data line, Power supply line)
or Category 5 Shielded Twisted-Pair straight cable for LAN (CAT5-STP), M3 screw terminal

Maximum Cable Distance

Total 800 m (874.89 yd)

No. of Connectable RM-320F

Max. 3 units

Operation

Emergency key, Evacuate key, Alert key, Emergency reset key, CPU switch, Reset switch

Indicator

Power indicator, Emergency indicator, Communication failure indicator, CPU OFF indicator,
Evacuation announcement indicator, Alert announcement indicator,
Emergency reset indicator, Microphone in-use indicator,
Emergency broadcast equipment in-use indicator

Operating Temperature

-5 ℃ to +45 ℃ (23 ゜F to 113 ゜F)

Operating Humidity

5 % to 95 %RH (no condensation)

Finish

ABS resin, blueish gray (PANTONE 538 or its equivalent)

Dimensions

200 (W) × 215 (H) × 82.5 (D) mm (7.87" × 8.46" × 3.25“)

Weight

1.1 kg (2.43 lb) (with wall mounting bracket unit)

Accessory

Wall mounting bracket unit…1, Wall mounting screw…2

 


 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 
Weight0.82 kg0.50 kg3.50 kg3.80 kg1.10 kg1.10 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.82 kg
Weight 0.50 kg
Weight 3.50 kg
Weight 3.80 kg
Weight 1.10 kg
Weight 1.10 kg